DIN Standards : DIN ICS 49 Aircraft and Space Vehicle Engineering
Aerospace; rivet design values, static load, for flush heat rivet joints, double shear; rivet material 3.1324, metric series (FOREIGN STANDARD)
DIN 65495-302:1989
Aerospace; rivet design values, static load, for flush heat rivet joints, double shear; rivet material 3.1124, metric series (FOREIGN STANDARD)
DIN 65495-301:1989
Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 2.4360, metric series (FOREIGN STANDARD)
DIN 65495-205:1990
Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 3.1324, metric series (FOREIGN STANDARD)
DIN 65495-202:1990
Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 3.1124, metric series (FOREIGN STANDARD)
DIN 65495-201:1990
Aerospace; rivet design values, static load, flush head rivet joints, single shear; rivet material 2.4360, metric series (FOREIGN STANDARD)
DIN 65495-105:1989
Aerospace; rivet design values, static load, for flush head rivet joints, single shear; rivet material 3.1324, metric series (FOREIGN STANDARD)
DIN 65495-102:1989
Aerospace; rivet design values, static load, for flush head rivet joints, single shear; rivet material 3.1124, metric series (FOREIGN STANDARD)
DIN 65495-101:1989
Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 2.4360, metric series (FOREIGN STANDARD)
DIN 65494-305:1989
Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 3.3354, metric series (FOREIGN STANDARD)
DIN 65494-303:1989
Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 3.1324, metric series (FOREIGN STANDARD)
DIN 65494-302:1989
Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 3.1124, metric series (FOREIGN STANDARD)
DIN 65494-301:1989
Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 2.4360, metric series (FOREIGN STANDARD)
DIN 65494-105:1989
Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 3.3354, metric series (FOREIGN STANDARD)
DIN 65494-103:1989
Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 3.1324, metric series (FOREIGN STANDARD)
DIN 65494-102:1989
Aerospace; rivet design values, static load, for protruding head rivet joints, single shear; rivet material 3.1124, metric series (FOREIGN STANDARD)
DIN 65494-101:1989
Aerospace; fasteners for structural application; rotary fasteners; receptacle, pressure-tight (FOREIGN STANDARD)
DIN 65493:1993
Aerospace; fasteners for structural application; rotary fasteners; receptacle (FOREIGN STANDARD)
DIN 65492:1993
Aerospace; fasteners for structural and non-structural applications; rotary fasteners; countersunk washer (FOREIGN STANDARD)
DIN 65489:1993
Aerospace; fasteners for structural application; rotary fasteners; installation dimensions (FOREIGN STANDARD)
DIN 65488:1993
Aerospace; fasteners for structural application; rotary fasteners; stud with countersunk head (FOREIGN STANDARD)
DIN 65487:1993
Aerospace; fasteners for structural application; rotary fasteners, mechanical properties; rotary fastener, assembly, pressure-tight (FOREIGN STANDARD)
DIN 65486:1993
Aerospace; fasteners for structural application; rotary fastener, mechanical properties; rotary fastener, assembly (FOREIGN STANDARD)
DIN 65485:1993
Aerospace; hexagon nuts with flange and MJ thread, self-locking, corrosion-resisting steel; class: 1100 MPa/315 ?C (FOREIGN STANDARD)
DIN 65480:2008
Aerospace - Press nuts, with MJ thread, closed type, self-locking, corrosion-resisting steel; Classification: 1100 MPa/315 ?C/425 ?C (FOREIGN STANDARD)
DIN 65477:2003
Aerospace - Studs with MJ thread, ring locked, titanium alloy - Nominal tensile strength 1100 MPa, for temperatures up to 315 ?C (FOREIGN STANDARD)
DIN 65464:2008
Aerospace; studs with MJ thread, captive ring lock, corrosion-resisting steel, tensile strength 1100 MPa, for temperature up to 315 Grad ?C (FOREIGN STANDARD)
DIN 65462:2008
Aerospace; thimbles, formed from steel; dimensions, masses (FOREIGN STANDARD)
DIN 65457:1987
Aerospace; washers for flight control rods, with hole for bonding (FOREIGN STANDARD)
DIN 65456:1987
Aerospace; hinges, extruded, in aluminium and corrosion-restisting steel; half-hinges and hinges in manufacturing lengths; light series (FOREIGN STANDARD)
DIN 65454:1988
Aerospace; structural adhesives; wedge test (FOREIGN STANDARD)
DIN 65448:1988
Aerospace; rivets, universal head, nickel alloys, metric series (FOREIGN STANDARD)
DIN 65446:1993
Aerospace; rivets, 100? reduced countersunk head, metric series, nickel alloys (FOREIGN STANDARD)
DIN 65445:1987
Aerospace; rivets, 100? countersunk head, nickel alloy, metric series (FOREIGN STANDARD)
DIN 65444:1993
Aerospace; bihexagonal head bolts, close tolerance, with medium-length MJ thread, corrosion resisting nickel alloy; nominal tensile strength 1550 MPa, for temperatures up to 315 ?C (FOREIGN STANDARD)
DIN 65442:1993
Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 ?C (FOREIGN STANDARD)
DIN 65438:1993
Aerospace; standard quality (STQ) and disc quality (DQ) of titanium and titanium alloys; requirements and tests (FOREIGN STANDARD)
DIN 65436:1989
Aerospace; sleeves for fasteners; technical specification (FOREIGN STANDARD)
DIN 65435:1989
Aerospace; sleeves; wall thickness 0,5 mm, for fasteners with reduced countersunk head (FOREIGN STANDARD)
DIN 65434:1987
Aerospace - Sleeves, wall thickness 0,25 mm, for fasteners with reduced countersunk head (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN 65433:2002
Aerospace - Sleeves, wall thickness 0,5 mm, for fasteners with countersunk head (FOREIGN STANDARD)
DIN 65431:2005
Aerospace - Sleeves, wall thickness 0,25 mm, for fasteners with countersunk head (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN 65430:2002
Aerospace - Sleeves, wall thickness 0,5 mm, for fasteners with protruding head (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN 65429:2002
Aerospace; sleeves; wall thickness 0,25 mm, for fasteners with protruding head (FOREIGN STANDARD)
DIN 65428:1987
Aerospace; aromatic polyamide (aramid); woven filament fabric prepreg from high-modulus filament yarn and epoxy resin; technical specification (FOREIGN STANDARD)
DIN 65426-2:1989
Aerospace; studs with MJ thread, ring locked, corrosion resisting steel, nominal tensile strength 1250 Mpa, for temperatures up to 425 ?C (FOREIGN STANDARD)
DIN 65396:1989
Aerospace; studs with MJ thread, ring locked, steel; nominal tensile strength 900 MPa, for temperatures up to 235 ?C (FOREIGN STANDARD)
DIN 65395:1989
Aerospace - Thread inserts with MJ thread, ring locked, screw-locking, steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/235 ?C (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN 65393:2002
Aerospace - Press nuts with MJ thread, self-locking, floating, steel; Classification: 1100 MPa/235 ?C (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN 65392:2002
Aerospace - Press nuts with MJ thread, self-locking, corrosion-resisting steel; Classification: 1100 MPa/315 ?C/425 ?C (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN 65391:2002
Aerospace; hot-rolled steel sheet and plate; dimensions, masses (FOREIGN STANDARD)
DIN 65390:1989
Aerospace - Cold-rolled steel sheet - Dimensions, masses (FOREIGN STANDARD)
DIN 65389:1996
Aerospace; hydraulic fluid power; filter elements; reporting of test data (FOREIGN STANDARD)
DIN 65385:1991
Aerospace; reinforcement fibres for plastics; tensile test of impregnated yarn test specimens (FOREIGN STANDARD)
DIN 65382:1988
Aerospace; polytetrafluoroethylene (PTFE) semi-finished products and moulded parts; technical specification (FOREIGN STANDARD)
DIN 65374:1989
Aerospace; polyamide (PA) semi-finished products and moulded parts; technical specification (FOREIGN STANDARD)
DIN 65373:1989
Aerospace; single fork ends for adjustable control rods (FOREIGN STANDARD)
DIN 65364:1991
Aerospace; lock washers for flight control rods (FOREIGN STANDARD)
DIN 65363:1987
Aerospace; aromatic polyamide (aramid); high tenacity aramid filament yarns; technical specification (FOREIGN STANDARD)
DIN 65356-2:1988
Aerospace; aromatic polyamide (aramid); high tenacity aramid filament yarns; dimensions, masses (FOREIGN STANDARD)
DIN 65356-1:1988
Aerospace; collars, metric series, wrought aluminium alloy (FOREIGN STANDARD)
DIN 65355:1987
Aerospace; riveting; assembly accessibility of riveting tools for close tolerance rivets (FOREIGN STANDARD)
DIN 65350-4:1988
Aerospace; riveting; assembly accessibility of riveting tools for threaded blind rivets (FOREIGN STANDARD)
DIN 65350-3:1988
Aerospace; riveting; assembly accessibility of riveting tools for blind rivets (FOREIGN STANDARD)
DIN 65350-2:1988
Aerospace; riveting; assembly accessibility of riveting tools for solid rivets (FOREIGN STANDARD)
DIN 65350-1:1988
Aerospace - Testing of locking torques for nuts and related threaded parts, with metric screw thread - Test methods (FOREIGN STANDARD)
DIN 65349:2001
Aerospace; seamles internal pressure tubes in titanium alloys; technical specification (FOREIGN STANDARD)
DIN 65348:1988
Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, steel; Classification: 1100 MPa/235 ?C (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN 65347:2002
Aerospace; anchor nuts with MJ thread, deep counterbore, self-locking, two lug, steel; classification: 1100 MPa/235 ?C (FOREIGN STANDARD)
DIN 65345:1986
Aerospace - Anchor nuts with MJ-thread, deep counterbore, self-locking, two lug, corrosion-resisting steel, classification: 1100 MPa/315 oC/425 oC (FOREIGN STANDARD)
DIN 65344:2005
Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, two lug, reduced, steel; Classification: 1100 MPa/235 ?C (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN 65343:2002
DIN 65342: 2005 (FOREIGN STANDARD)
DIN 65342:2005
Aerospace - Hexagon bolts, close tolerance, with short-length MJ thread, corrosion-resisting steel - Nominal tensile strength 1100 MPa, for temperatures up to 425 ?C (FOREIGN STANDARD)
DIN 65339:1998
Aerospace; hexagon bolts, close tolerance, with short-length MJ thread, shoulder, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 ?C (FOREIGN STANDARD)
DIN 65338:1993
Aerospace; hexagon bolts, with MJ thread, short thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 ?C (FOREIGN STANDARD)
DIN 65330:1987
Aerospace; pan head bolts, close tolerance, with internal offset cruciform ribbed drive recess and short-length MJ thread, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 ?C (FOREIGN STANDARD)
DIN 65324:1993
Aerospace; acrylic sheets, panes and moulded parts; technical specification (FOREIGN STANDARD)
DIN 65321:1989
Aerospace; pan head bolts, close tolerance, with internal offset cruciform ribbed drive recess and short-length MJ thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 ?C (FOREIGN STANDARD)
DIN 65320:1993
Aerospace; pan head bolts, close tolerance, with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 ?C (FOREIGN STANDARD)
DIN 65319:1987
Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ-thread, steel; nominal tensile strength 110 MPa, for temperatures up to 235 ?C (FOREIGN STANDARD)
DIN 65318:1987
Aerospace; countersunk head screws with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 ?C (FOREIGN STANDARD)
DIN 65317:1987
Aerospace; countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 ?C (FOREIGN STANDARD)
DIN 65316:1993
Aerospace - Countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, steel - Nominale tensile strength 1100 MPa, for temperatures up to 235 ?C (FOREIGN STANDARD)
DIN 65314:1998
Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 ?C (FOREIGN STANDARD)
DIN 65313:1987
Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, corrosion-resisting steel (FOREIGN STANDARD)
DIN 65309:2008
Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, corrosion-resisting steel (FOREIGN STANDARD)
DIN 65308:2008
Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, corrosion-resisting steel (FOREIGN STANDARD)
DIN 65307:1986
Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; technical specification (FOREIGN STANDARD)
DIN 65300:1988
Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; double joints; connection dimensions, loads masses (FOREIGN STANDARD)
DIN 65299:1988
Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; single joints; connection dimensions, loads, masses (FOREIGN STANDARD)
DIN 65298:1988
Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 ?C (FOREIGN STANDARD)
DIN 65289:1987
Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 900 MPa, for temperatures up to 235 ?c (FOREIGN STANDARD)
DIN 65286:1987
Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 ?C (FOREIGN STANDARD)
DIN 65285:1987
Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 ?C (FOREIGN STANDARD)
DIN 65284:1987
Aerospace series - Nuts, hexagon, thin, with MJ thread, corrosion-resisting steel, classification: 1100 MPa/315 oC/425 oC (FOREIGN STANDARD)
DIN 65281:2005
Aerospace series - Elastomeric semi-finished products and parts - Technical specification (FOREIGN STANDARD)
DIN 65271:2002
Aerospace - Nuts, hexagon, slotted/castellated with MJ thread, self-locking, corrosion-resisting steel, classification: 1100 MPa/120 ?C (Foreign Standard)
DIN 65270:2009
Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel, nominal tensile strength 900 MPa, for temperatures up to 235 ?C (FOREIGN STANDARD)
DIN 65269:1987
Aerospace; screws, hexagon, with MJ thread, threaded approximately to head, steel, nominal tensile strength 900 MPa, for temperatures up to 235 ?C (FOREIGN STANDARD)
DIN 65267:1992
Aerospace - Screws, hexagon bolts with MJ thread, threaded approximately to head, titanium alloy - Nominal tensile strength 1100 MPa, for temperatures up to 315 ?C (FOREIGN STANDARD)
DIN 65265:1998
Aerospace series - Sealing compounds - Part 3: Silcone-rubber base; technical specification (FOREIGN STANDARD)
DIN 65262-3:1996
Aerospace series - Sealing compounds - Part 2: Vinylidene fluoride and hexafluoropropylene base; technical specification (FOREIGN STANDARD)
DIN 65262-2:1998
Aerospace - Sealing compounds - Part 1: Polysulphide polymer base; technical specification (FOREIGN STANDARD)
DIN 65262-1:1996
Aerospace; rivets, universal head, aluminium and aluminium alloys; metric series (FOREIGN STANDARD)
DIN 65260:1989
Aerospace; rivets, 100? countersunk head, reduced, aluminium and aluminium alloys; metric series (FOREIGN STANDARD)
DIN 65259:1989
Aerospace; rivets, 100? countersunk head, aluminium and aluminium alloys; metric series (FOREIGN STANDARD)
DIN 65258:1989
Aerospace series - Cellular elastomeric materials, open and closed cells - Semi-finished products and moulded parts; technical specification (FOREIGN STANDARD)
DIN 65252:1999
Aerospace; seamless internal pressure tubes in titanium and titanium alloys; dimensions, masses (FOREIGN STANDARD)
DIN 65250:1989
Aerospace; nuts, hexagon, slotted/castellated, thin, with MJ thread, corrosion-resisting steel, class: 1100 MPa/425 ?C (FOREIGN STANDARD)
DIN 65247:1989
Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, single lug, corrosion-resisting steel, classification: 1100 MPa/315 YC/425 YC (FOREIGN STANDARD)
DIN 65244:2006
Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, single lug, steel; Classification: 1100 MPa/235 ?C (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN 65243:2002
Aerospace - Anchor nuts with MJ-thread, deep counterbore, self-locking, floating, two lug, corrosion-resisting steel, classification: 1100 MPa/315 YC/425 YC (FOREIGN STANDARD)
DIN 65242:2006
Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, two lug, steel; Classification: 1100 MPa/235 ?C (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN 65240:2002
Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, non-floating, corner, corrosion-resisting steel, classification: 1100 MPa/315 YC/425 YC (FOREIGN STANDARD)
DIN 65239:2006
Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, non-floating, corner, steel; Classification: 1100 MPa/235 ?C (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN 65238:2002
Aerospace - Spherical plain bearings, steel on steel - Technical specification; inactive for new design (FOREIGN STANDARD)
DIN 65237:1996
Aerospace; steel, nickel- and cobalt-alloy wire; technical specification (FOREIGN STANDARD)
DIN 65236:1988
Aerospace - Gang channel nut assembly, with self-locking nuts, with MJ thread, nut spacing fixed or optional, channel in aluminium; Classification: 1100 MPa/120 ?C (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN 65220:2002
Aerospace series - Washers, countersunk; Text German and English (Foreign Standard)
DIN 65209:2009
Aerospace series - Washers, countersunk (FOREIGN STANDARD)
DIN 65209:2001
Aerospace; tolerances for wrougth aluminium alloy folded profiles (sections) (FOREIGN STANDARD)
DIN 65207:1987
Aerospace series - Elastomeric O-rings - Technical specification; Text in German and Englisch (FOREIGN STANDARD)
DIN 65203:2008
Aerospace series - Elastomeric O-rings - Dimensions (FOREIGN STANDARD)
DIN 65202:1999
Aerospace; titanium alloy round bars and wire for screw stock; dimensions, masses (FOREIGN STANDARD)
DIN 65197:1989
Aerospace; sealing plugs for electrical circular connectors (FOREIGN STANDARD)
DIN 65194:1986
Aerospace - Inserts for composite materials with MJ thread, threaded part floating and screw-locking, corrosion-resisting steel (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN 65191:2002
Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, aluminium alloy (FOREIGN STANDARD)
DIN 65188:2008
Aerospace; fasteners; rotary fasteners for structural and non-structural applications; technical specification (FOREIGN STANDARD)
DIN 65185-1:1993
Aerospace; countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 ?C (FOREIGN STANDARD)
DIN 65179:1993
Aerospace; round bars of titanium and titanium alloys; dimensions, masses (FOREIGN STANDARD)
DIN 65174:1991
Aerospace series - Brazed and high-temperature brazed metallic components - Technical specifications; Text in German and English (Foreign Standard)
DIN 65170:2009
Aerospace; steel collars, metric series (FOREIGN STANDARD)
DIN 65157:1989
Aerospace; close tolerance steel rivets with 100? flush head, shank tolerance 0 to - 0,02 mm, metric series (FOREIGN STANDARD)
DIN 65156:1989
Aerospace; steel rivets, close tolerance, with protruding head, shank tolerance 0 to -0,02 mm, metric series (FOREIGN STANDARD)
DIN 65155:1989
Aerospace; heat treatment of wrought titanium and titanium alloys (FOREIGN STANDARD)
DIN 65084:1990
Aerospace - Adhesive films and primers for structural assemblies - Technical specification (FOREIGN STANDARD)
DIN 65074:1999
Aerospace - Potting compounds for care and edge filling for sandwich structures - Technical specification (FOREIGN STANDARD)
DIN 65064:1998
Aerospace; threaded control cable ends and turnbarrels; technical specification; inactive for new design (FOREIGN STANDARD)
DIN 65055:1992
Aerospace; control cable fittings; technical specification; inactive for new design (FOREIGN STANDARD)
DIN 65053:1992
Aerospace; pulleys for control cables; technical specification (FOREIGN STANDARD)
DIN 65052:1988
Aerospace; steel, nickel- and cobalt-alloy bars; technical specification (FOREIGN STANDARD)
DIN 65038-1:1989
Aerospace; aluminium- and magnesium-alloy forgings; technical specification (FOREIGN STANDARD)
DIN 65033:1990
Aerospace; rigid cellular materials; sheet; technical specification (FOREIGN STANDARD)
DIN 29972:1988
Aerospace - Honeycomb cores of polyamide paper, phenolic resin coated - Technical specification (FOREIGN STANDARD)
DIN 29970:1998
Aerospace; alternative materials for fasteners; solid rivets (FOREIGN STANDARD)
DIN 29895-2:1989
Aerospace; alternative materials for fasteners (FOREIGN STANDARD)
DIN 29895:1984
Aerospace; polycarbonate (PC) semi-finished products and moulded parts; technical specification (FOREIGN STANDARD)
DIN 29880:1989
Aerospace series - Resistance welded metal parts - Technical specification; Text in German and English (FOREIGN STANDARD)
DIN 29878:2008
Aerospace; vented nickel-cadmium storage batteries, 24 V 40 Ah (FOREIGN STANDARD)
DIN 29831:1987
Aerospace; seamless structural tubes in steel and nickel alloys; technical specification (FOREIGN STANDARD)
DIN 29657:1991
Aerospace; press nuts, self-locking, floating; directions for design and installation (FOREIGN STANDARD)
DIN 29639-2:1988
Aerospace; press nuts, self-locking; directions for design and installation (FOREIGN STANDARD)
DIN 29638-2:2008
Aerospace; aluminium alloy collars, metric series (FOREIGN STANDARD)
DIN 29594:1989
Aerospace; aircraft electrical systems; testing of electrical cables installed in aircraft (FOREIGN STANDARD)
DIN 29576-2:1987
Aerospace; aircraft electrical systems; characteristics; inactive for new design (FOREIGN STANDARD)
DIN 29576-1:1992
Aerospace; offsettings; directions for design and examples (FOREIGN STANDARD)
DIN 29548-3:1993
Aerospace; offsettings without wedge (FOREIGN STANDARD)
DIN 29548-2:1993
Aerospace; offsettings with wedge (FOREIGN STANDARD)
DIN 29548-1:1993
Aerospace; seamless structural tubes in wrought aluminium alloys; technical specification; inactive for new design (FOREIGN STANDARD)
DIN 29547:1990
Aerospace; seamless internal pressure tubes in wrought aluminium alloys; technical specification; inactive for new design (FOREIGN STANDARD)
DIN 29543:1990
Aerospace series - Rivets, solid in aluminium and aluminium alloy, inch based series - Technical specification (FOREIGN STANDARD)
DIN EN 2345-1:1996
Aerospace series - Aluminium and aluminium alloy rivets - Technical specification (FOREIGN STANDARD)
DIN EN 2345:1996
Aerospace series - Round bars, machined, in heat resisting alloys - Diameter 10 mm D 180 mm; Dimensions; German and English version EN 2344:2001 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 2344:2003
Aerospace series - Heat and crazing resistant cast and multi-axially orientatet acrylic sheets for aircraft glacing - Technical specification (FOREIGN STANDARD)
DIN EN 2343:1995
Aerospace series - Sheets, cold rolled, in titanium and titanium alloys, thickness 0,2 mma6 mm - Dimensions; German and English version EN 2339:2001 (FOREIGN STANDARD)
DIN EN 2339:2003
Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm
DIN EN 2338:2003
Aerospace series - Spherical plain bearings - Technical specification; German and English version EN 2337:2006 (FOREIGN STANDARD)
DIN EN 2337:2007
Aerospace series - Bearings, spherical plain in steel with assembly slots - Dimensions and loads; German and English version EN 2336:2005 (FOREIGN STANDARD)
DIN EN 2336:2006
Aerospace series - Bearings, spherical plain in corrosion resisting steel without assembly slot - Dimensions and loads; German and English version EN 2335:2005 (FOREIGN STANDARD)
DIN EN 2335:2006
Aerospace series - Washers, tab in corrosion resisting steel, cadmium plated, for flight control rods - Dimensions; German and English version EN 2328:2006 (FOREIGN STANDARD)
DIN EN 2328:2007
Aerospace series - Washers, lock, with radial serrations in alloy steel, cadmium plated, for flight control rods - Dimensions; German and English version EN 2327:2006 (FOREIGN STANDARD)
DIN EN 2327:2007
Aerospace series; aluminium alloy AL-P2024-T3511; extruded bars and sections 1,2 mm a or D 150 mm (FOREIGN STANDARD)
DIN EN 2318:1993
Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15), solution treated and precipitation treated - Hand and die forgings D<(Index)e> 100 mm, R<(Index)m> 960 MPa (FOREIGN STANDARD)
DIN EN 2304:1999
Aerospace series - Rod bodies in aluminium alloy for flight controls - Technical specification (FOREIGN STANDARD)
DIN EN 2289:1996
Aerospace series - Testing of aircraft wiring (FOREIGN STANDARD)
DIN EN 2283:1996
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 ?C and 260 ?C - Part 010: DR family, single UV laser printable - Product standard; German and English version EN 2267-010:2005 (FOREIGN STANDARD)
DIN EN 2267-010:2006
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 ?C and 260 ?C - Part 009: DRA family, single and multicore assembly - Product standard; German and English version EN 2267-009:2005 (FOREIGN STANDARD)
DIN EN 2267-009:2006
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 oC and 260 oC - Part 008: DM family, single UV laser printable and muticore assembly - Product standard; German and Englis (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2267-008:2006
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 oC and 260 oC - Part 007: DMA family, single ink-jet printable and multicore assembly - Product standard; German and Engli (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2267-007:2006
Aerospace series - Cables, electrical, for general purpose; operating temperatures between -55 ?C and 260 ?C - Part 006: YAG X3 laser printable; product standard (FOREIGN STANDARD)
DIN EN 2267-006:1995
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 ?C and 260 ?C - Part 005: UV laser printable - Product standard; German and English version EN 2267-005:2006 (FOREIGN STANDARD)
DIN EN 2267-005:2006
Aerospace series - Cables, electrical, for general purpose; operating temperatures between -55 ?C and 260 ?C - Part 004: CO<(Index)2> laser printable; product standard (FOREIGN STANDARD)
DIN EN 2267-004:1995
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 oC and 260 oC - Part 003: Ink jet printable - Product standard; German and English version EN 2267-003:2005 (FOREIGN STANDARD)
DIN EN 2267-003:2006
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 oC and 260 oC - Part 002: General; German and English version EN 2267-002:2005 (FOREIGN STANDARD)
DIN EN 2267-002:2006
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 oC and 200 oC - Part 007: UV laser printable multicore jacketed cable - Product standard; German and English version EN 2266-007:2005 (FOREIGN STANDARD)
DIN EN 2266-007:2006
Aerospace series - Cables, electrical, for general purpose; operating temperatures between -55 ?C and 200 ?C - Part 006: YAG X3 laser printable; product standard (FOREIGN STANDARD)
DIN EN 2266-006:1995
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 oC and 200 oC - Part 005: UV-laser printable - Product standard; German and English version EN 2266-005:2005 (FOREIGN STANDARD)
DIN EN 2266-005:2006
Aerospace series - Cables, electrical, for general purpose; operating temperatures between -55 ?C and 200 ?C - Part 004: CO<(Index)2> laser printable; product standard (FOREIGN STANDARD)
DIN EN 2266-004:1995
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 oC and 200 oC - Part 003: Ink jet printable - Product standard; German and English version EN 2266-003:2005 (FOREIGN STANDARD)
DIN EN 2266-003:2006
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 oC and 200 oC - Part 002: General; German and English version EN 2266-002:2005 (FOREIGN STANDARD)
DIN EN 2266-002:2006
Aerospace series - Cables, electrical, for general purpose; operating temperatures between -55 ?C and 150 ?C - Part 006: YAG X3 laser printable; product standard (FOREIGN STANDARD)
DIN EN 2265-006:1995
Aerospace series - Cables, electrical, for general purpose; operating temperatures between -55 ?C and 150 ?C - Part 005: UV laser printable; product standard (FOREIGN STANDARD)
DIN EN 2265-005:1995
Aerospace series - Cables, electrical, for general purpose; operating temperatures between -55 ?C and 150 ?C - Part 004: CO<(Index)2> laser printable; product standard (FOREIGN STANDARD)
DIN EN 2265-004:1995
Aerospace series - Cables, electrical, for general purpose; operating temperatures between -55 ?C and 150 ?C - Part 003: Ink jet printable; product standard (FOREIGN STANDARD)
DIN EN 2265-003:1995
Aerospace series - Cables, electrical, for general purpose; operating temperatures between -55 ?C and 150 ?C - Part 002: General (FOREIGN STANDARD)
DIN EN 2265-002:1995
Aerospace series - Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 2264:1996
Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD (FOREIGN STANDARD)
DIN EN 2262:1995
Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD (FOREIGN STANDARD)
DIN EN 2261:1995
Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD (FOREIGN STANDARD)
DIN EN 2260:1995
Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD (FOREIGN STANDARD)
DIN EN 2259:1995
Aerospace series - Circular tubes for fluids in aluminium and aluminium alloys; diameter 3,2 mm D 100 mm, thickness 0,6 mm a 2,5 mm; dimensions (FOREIGN STANDARD)
DIN EN 2258:1997
Aerospace series - Circular tubes for structures in aluminium and aluminium alloys; diameter 6 mm D 100 mm, thickness 1 mm a 6 mm; dimensions (FOREIGN STANDARD)
DIN EN 2257:1997
Aerospace series - Aluminium alloy AL-P2618A-T852 - Hand and die forgings - a 150 mm; German and English version EN 2256:2004 (FOREIGN STANDARD)
DIN EN 2256:2006
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain; German and English version EN 2243-6:2005 (FOREIGN STANDARD)
DIN EN 2243-6:2006
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests; German and English version EN 2243-5:2005 (FOREIGN STANDARD)
DIN EN 2243-5:2006
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 4: Metal-honeycomb core flatwise tensile test; German and English version EN 2243-4:2005 (FOREIGN STANDARD)
DIN EN 2243-4:2006
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core; German and English version EN 2243-3:2005 (FOREIGN STANDARD)
DIN EN 2243-3:2006
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal; German and English version EN 2243-2:2005 (FOREIGN STANDARD)
DIN EN 2243-2:2006
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 1: Single lap shear; German and English version EN 2243-1:2005 (FOREIGN STANDARD)
DIN EN 2243-1:2007
Aerospace series - Lamps, incandescent - Part 101: Lamp, code 404-02; product standard (FOREIGN STANDARD)
DIN EN 2240-101:1998
Aerospace series - Lamps, incandescent - Part 100: Lamp, code 2078; product standard (FOREIGN STANDARD)
DIN EN 2240-100:1998
Aerospace series - Lamps, incandescent - Part 099: Lamp, code 416700; product standard (FOREIGN STANDARD)
DIN EN 2240-099:1997
Aerospace series - Lamps, incandescent - Part 098: Lamp, code 416650; product standard (FOREIGN STANDARD)
DIN EN 2240-098:1997
Aerospace series - Lamps, incandescent - Part 097: Lamp, code 72601-12; product standard (FOREIGN STANDARD)
DIN EN 2240-097:1997
Aerospace series - Lamps, incandescent - Part 096: Lamp, code 72601-6; product standard (FOREIGN STANDARD)
DIN EN 2240-096:1997
Aerospace series - Lamps, incandescent - Part 095: Lamp, code 8552; product standard (FOREIGN STANDARD)
DIN EN 2240-095:1997
Aerospace series - Lamps, incandescent - Part 094: Lamp, code 8022; product standard (FOREIGN STANDARD)
DIN EN 2240-094:1997
Aerospace series - Lamps, incandescent - Part 093: Lamp, code 7839; product standard (FOREIGN STANDARD)
DIN EN 2240-093:1997
Aerospace series - Lamps, incandescent - Part 092: Lamp, code 7715; product standard (FOREIGN STANDARD)
DIN EN 2240-092:1997
Aerospace series - Lamps, incandescent - Part 091: Lamp, code 7714; product standard (FOREIGN STANDARD)
DIN EN 2240-091:1997
Aerospace series - Lamps, incandescent - Part 090: Lamp, code 7683; product standard (FOREIGN STANDARD)
DIN EN 2240-090:1997
Aerospace series - Lamps, incandescent - Part 089: Lamp, code A7512-24; product standard (FOREIGN STANDARD)
DIN EN 2240-089:1997
Aerospace series - Lamps, incandescent - Part 088: Lamp, code A7512-12; product standard (FOREIGN STANDARD)
DIN EN 2240-088:1997
Aerospace series - Lamps, incandescent - Part 087: Lamp, code 7341; product standard (FOREIGN STANDARD)
DIN EN 2240-087:1997
Aerospace series - Lamps, incandescent - Part 086: Lamp, code 7333; product standard (FOREIGN STANDARD)
DIN EN 2240-086:1997
Aerospace series - Lamps, incandescent - Part 085: Lamp, code 7265; product standard (FOREIGN STANDARD)
DIN EN 2240-085:1997
Aerospace series - Lamps, incandescent - Part 084: Lamp, code 7153; product standard (FOREIGN STANDARD)
DIN EN 2240-084:1997
Aerospace series - Lamps, incandescent - Part 083: Lamp, code 7152; product standard (FOREIGN STANDARD)
DIN EN 2240-083:1997
Aerospace series - Lamps, incandescent - Part 082: Lamp, code 7079; product standard (FOREIGN STANDARD)
DIN EN 2240-082:1997
Aerospace series - Lamps, incandescent - Part 081: Lamp, code 7070; product standard (FOREIGN STANDARD)
DIN EN 2240-081:1997
Aerospace series - Lamps, incandescent - Part 080: Lamp, code 7007-704; product standard (FOREIGN STANDARD)
DIN EN 2240-080:1997
Aerospace series - Lamps, incandescent - Part 079: Lamp, code 6839; product standard (FOREIGN STANDARD)
DIN EN 2240-079:1997
Aerospace series - Lamps, incandescent - Part 078: Lamp, code 6838; product standard (FOREIGN STANDARD)
DIN EN 2240-078:1997
Aerospace series - Lamps, incandescent - Part 077: Lamp, code 6832; product standard (FOREIGN STANDARD)
DIN EN 2240-077:1997
Aerospace series - Lamps, incandescent - Part 076: Lamp, code 5678; product standard (FOREIGN STANDARD)
DIN EN 2240-076:1997
Aerospace series - Lamps, incandescent - Part 075: Lamp, code 5448; product standard (FOREIGN STANDARD)
DIN EN 2240-075:1997
Aerospace series - Lamps, incandescent - Part 074: Lamp, code 5086; product standard (FOREIGN STANDARD)
DIN EN 2240-074:1997
Aerospace series - Lamps, incandescent - Part 073: Lamp, code 4174; product standard (FOREIGN STANDARD)
DIN EN 2240-073:1997
Aerospace series - Lamps, incandescent - Part 072: Lamp, code 3912; product standard (FOREIGN STANDARD)
DIN EN 2240-072:1997
Aerospace series - Lamps, incandescent - Part 071: Lamp, code 3011; product standard (FOREIGN STANDARD)
DIN EN 2240-071:1997
Aerospace series - Lamps, incandescent - Part 070: Lamp, code 2232; product standard (FOREIGN STANDARD)
DIN EN 2240-070:1997
Aerospace series - Lamps, incandescent - Part 069: Lamp, code 1978; product standard (FOREIGN STANDARD)
DIN EN 2240-069:1997
Aerospace series - Lamps, incandescent - Part 068: Lamp, code 1864; product standard (FOREIGN STANDARD)
DIN EN 2240-068:1997
Aerospace series - Lamps, incandescent - Part 067: Lamp, code 1843; product standard (FOREIGN STANDARD)
DIN EN 2240-067:1997
Aerospace series - Lamps, incandescent - Part 066: Lamp, code 1829; product standard (FOREIGN STANDARD)
DIN EN 2240-066:1997
Aerospace series - Lamps, incandescent - Part 065: Lamp, code 1820; product standard (FOREIGN STANDARD)
DIN EN 2240-065:1997
Aerospace series - Lamps, incandescent - Part 064: Lamp, code 1819; product standard (FOREIGN STANDARD)
DIN EN 2240-064:1997
Aerospace series - Lamps, incandescent - Part 063: Lamp, code 1815; product standard (FOREIGN STANDARD)
DIN EN 2240-063:1997
Aerospace series - Lamps, incandescent - Part 062: Lamp, code 1810; product standard (FOREIGN STANDARD)
DIN EN 2240-062:1997
Aerospace series - Lamps, incandescent - Part 061: Lamp, code 1683; product standard (FOREIGN STANDARD)
DIN EN 2240-061:1997
Aerospace series - Lamps, incandescent - Part 060: Lamp, code 1619; product standard (FOREIGN STANDARD)
DIN EN 2240-060:1997
Aerospace series - Lamps, incandescent - Part 059: Lamp, code 1591; product standard (FOREIGN STANDARD)
DIN EN 2240-059:1997
Aerospace series - Lamps, incandescent - Part 058: Lamp, code 1524; product standard (FOREIGN STANDARD)
DIN EN 2240-058:1997
Aerospace series - Lamps, incandescent - Part 057: Lamp, code 1512; product standard (FOREIGN STANDARD)
DIN EN 2240-057:1997
Aerospace series - Lamps, incandescent - Part 056: Lamp, code 1506; product standard (FOREIGN STANDARD)
DIN EN 2240-056:1997
Aerospace series - Lamps, incandescent - Part 055: Lamp, code 1495; product standard (FOREIGN STANDARD)
DIN EN 2240-055:1997
Aerospace series - Lamps, incandescent - Part 054: Lamp, code 1317; product standard (FOREIGN STANDARD)
DIN EN 2240-054:1997
Aerospace series - Lamps, incandescent - Part 053: Lamp, code 1308; product standard (FOREIGN STANDARD)
DIN EN 2240-053:1997
Aerospace series - Lamps, incandescent - Part 052: Lamp, code 1222; product standard (FOREIGN STANDARD)
DIN EN 2240-052:1997
Aerospace series - Lamps, incandescent - Part 051: Lamp, code 1163; product standard (FOREIGN STANDARD)
DIN EN 2240-051:1997
Aerospace series - Lamps, incandescent - Part 050: Lamp, code 1064; product standard (FOREIGN STANDARD)
DIN EN 2240-050:1997
Aerospace series - Lamps, incandescent - Part 049: Lamp, code 757; product standard (FOREIGN STANDARD)
DIN EN 2240-049:1997
Aerospace series - Lamps, incandescent - Part 048: Lamp, code 718 NPC; product standard (FOREIGN STANDARD)
DIN EN 2240-048:1997
Aerospace series - Lamps, incandescent - Part 047: Lamp, code 718; product standard (FOREIGN STANDARD)
DIN EN 2240-047:1997
Aerospace series - Lamps, incandescent - Part 046: Lamp, code 715; product standard (FOREIGN STANDARD)
DIN EN 2240-046:1997
Aerospace series - Lamps, incandescent - Part 045: Lamp, code 714; product standard (FOREIGN STANDARD)
DIN EN 2240-045:1997
Aerospace series - Lamps, incandescent - Part 044: Lamp, code 713; product standard (FOREIGN STANDARD)
DIN EN 2240-044:1997
Aerospace series - Lamps, incandescent - Part 043: Lamp, code 685; product standard (FOREIGN STANDARD)
DIN EN 2240-043:1997
Aerospace series - Lamps, incandescent - Part 042: Lamp, code 683; product standard (FOREIGN STANDARD)
DIN EN 2240-042:1997
Aerospace series - Lamps, incandescent - Part 041: Lamp, code 682; product standard (FOREIGN STANDARD)
DIN EN 2240-041:1997
Aerospace series - Lamps, incandescent - Part 040: Lamp, code 680; product standard (FOREIGN STANDARD)
DIN EN 2240-040:1997
Aerospace series - Lamps, incandescent - Part 039: Lamp, code 600; product standard (FOREIGN STANDARD)
DIN EN 2240-039:1997
Aerospace series - Lamps, incandescent - Part 038: Lamp, code 401; product standard (FOREIGN STANDARD)
DIN EN 2240-038:1997
Aerospace series - Lamps, incandescent - Part 037: Lamp, code 394; product standard (FOREIGN STANDARD)
DIN EN 2240-037:1997
Aerospace series - Lamps, incandescent - Part 036: Lamp, code 388; product standard (FOREIGN STANDARD)
DIN EN 2240-036:1997
Aerospace series - Lamps, incandescent - Part 035: Lamp, code 387; product standard (FOREIGN STANDARD)
DIN EN 2240-035:1997
Aerospace series - Lamps, incandescent - Part 034: Lamp, code 382; product standard (FOREIGN STANDARD)
DIN EN 2240-034:1996
Aerospace series - Lamps, incandescent - Part 033: Lamp, code 377; product standard (FOREIGN STANDARD)
DIN EN 2240-033:1996
Aerospace series - Lamps, incandescent - Part 032: Lamp, code 376, product standard (FOREIGN STANDARD)
DIN EN 2240-032:1996
Aerospace series - Lamps, incandescent - Part 031: Lamp, code 356; product standard (FOREIGN STANDARD)
DIN EN 2240-031:1996
Aerospace series - Lamps, incandescent - Part 030: Lamp, code 345; product standard (FOREIGN STANDARD)
DIN EN 2240-030:1996
Aerospace series - Lamps, incandescent - Part 029: Lamp, code 338, product standard (FOREIGN STANDARD)
DIN EN 2240-029:1996
Aerospace series - Lamps, incandescent - Part 028: Lamp, code 337, product standard (FOREIGN STANDARD)
DIN EN 2240-028:1996
Aerospace series - Lamps, incandescent - Part 027: Lamp, code 334, product standard (FOREIGN STANDARD)
DIN EN 2240-027:1996
Aerospace series - Lamps, incandescent - Part 026: Lamp, code 330, product standard (FOREIGN STANDARD)
DIN EN 2240-026:1996
Aerospace series - Lamps, incandescent - Part 025: Lamp, code 328; product standard (FOREIGN STANDARD)
DIN EN 2240-025:1996
Aerospace series - Lamps, incandescent - Part 024: Lamp, code 327; product standard (FOREIGN STANDARD)
DIN EN 2240-024:1996
Aerospace series - Lamps, incandescent - Part 023: Lamp, code 316; product standard (FOREIGN STANDARD)
DIN EN 2240-023:1996
Aerospace series - Lamps, incandescent - Part 022: Lamp, code 315; product standard (FOREIGN STANDARD)
DIN EN 2240-022:1996
Aerospace series - Lamps, incandescent - Part 021: Lamp, code 313; product standard (FOREIGN STANDARD)
DIN EN 2240-021:1996
Aerospace series - Lamps, incandescent - Part 020: Lamp, code 311; product standard (FOREIGN STANDARD)
DIN EN 2240-020:1996
Aerospace series - Lamps, incandescent - Part 019: Lamp, code 308; product standard (FOREIGN STANDARD)
DIN EN 2240-019:1996
Aerospace series - Lamps, incandescent - Part 018: Lamp, code 307; product standard (FOREIGN STANDARD)
DIN EN 2240-018:1996
Aerospace series - Lamps, incandescent - Part 017: Lamp, code 306; product standard (FOREIGN STANDARD)
DIN EN 2240-017:1996
Aerospace series - Lamps, incandescent - Part 016: Lamp, code 305; product standard (FOREIGN STANDARD)
DIN EN 2240-016:1996
Aerospace series - Lamps, incandescent - Part 015: Lamp, code 304; product standard (FOREIGN STANDARD)
DIN EN 2240-015:1996
Aerospace series - Lamps, incandescent - Part 014: Lamp, code 303; product standard (FOREIGN STANDARD)
DIN EN 2240-014:1996
Aerospace series - Lamps, incandescent - Part 013: Lamp, code 301; product standard (FOREIGN STANDARD)
DIN EN 2240-013:1996
Aerospace series - Lamps, incandescent - Part 012: Lamp, code 95; product standard (FOREIGN STANDARD)
DIN EN 2240-012:1996
Aerospace series - Lamps, incandescent - Part 011: Lamp, code 85; product standard (FOREIGN STANDARD)
DIN EN 2240-011:1996
Aerospace series - Lamps, incandescent - Part 010: Lamp, code 84; product standard (FOREIGN STANDARD)
DIN EN 2240-010:1996
Aerospace series - Lamps, incandescent - Part 009: Lamp, code 83; product standard (FOREIGN STANDARD)
DIN EN 2240-009:1996
Aerospace series - Lamps, incandescent - Part 008: Lamp, code 75; product standard (FOREIGN STANDARD)
DIN EN 2240-008:1996
Aerospace series - Lamps, incandescent - Part 007: Lamp, code 74; product standard (FOREIGN STANDARD)
DIN EN 2240-007:1996
Aerospace series - Lamps, incandescent - Part 006: Lamp, code 73E; product standard (FOREIGN STANDARD)
DIN EN 2240-006:1996
Aerospace series - Lamps, incandescent - Part 005: Lamp, code 73; product standard (FOREIGN STANDARD)
DIN EN 2240-005:1996
Aerospace series - Lamps, incandescent - Part 004: Lamp, code 47; product standard (FOREIGN STANDARD)
DIN EN 2240-004:1996
Aerospace series - Lamps incandescent - Part 003: Lamp, code 44; product standard (FOREIGN STANDARD)
DIN EN 2240-003:1996
Aerospace series - Lamps incandescent - Part 002: Main characteristics (FOREIGN STANDARD)
DIN EN 2240-002:2000
Aerospace series - Lamps incandescent - Part 001: Technical specification (FOREIGN STANDARD)
DIN EN 2240-001:2000
Aerospace series - Single and multicore electrical cables, screened and jacketed; German and English version EN 2235:2006 (FOREIGN STANDARD)
DIN EN 2235:2007
Aerospace series - Cables, electrical, fire-resistant - Technical specification (FOREIGN STANDARD)
DIN EN 2234:2002
Aerospace series - Heat resisting alloy Ni-CD1701 (NiCo15Cr10Al6Ti5Mo3), vacuum melted, non heat treated - Precision casting, a or D 50 mm (FOREIGN STANDARD)
DIN EN 2233:1999
Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa R<(Index)m> 1100 MPa - Sheets, strips and plates - 0,5 mm a 20 mm; German and English version EN 2209:2008 (Foreign Standard)
DIN EN 2209:2009
Aerospace series - Steel FE-PL1502 (25CrMo4) - 650 MPa R<(Index)m> 850 MPa - Bars - D<(Index)e> 150 mm; German and English version EN 2206:2008 (Foreign Standard)
DIN EN 2206:2009
Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa R<(Index)m> 1100 MPa - Bars - D<(Index)e> 40 mm; German and English version EN 2205:2009 (Foreign Standard)
DIN EN 2205:2009
Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al), vacuum melted, solution treated and precipitation treated - Precision casting, D<(Index)e> 50 mm (FOREIGN STANDARD)
DIN EN 2204:1999
Aerospace series - Hest resisting alloy NI-PH1303 (NiCo20Cr20Mo5Ti2A1), solution treated - Sheet, strip and plate 0,2 mm a 10 mm (FOREIGN STANDARD)
DIN EN 2203:1999
Aerospace series - Heat resisting alloy NI-PH1303 (NiCo20Cr20Mo5Ti2Al), solution treated - Seamless tubes, D 50 mm, a 3 mm (FOREIGN STANDARD)
DIN EN 2202:1999
Aerospace series - Heat resisting alloy NI-PH1303 (NiCo20Cr20Mo5Ti2A1), solution treated and precipitation treated - Bar and section D<(Index)e> 200 mm (FOREIGN STANDARD)
DIN EN 2199:1999
Aerospace series - Heat resisting alloy NI-PH1701 (NiCr15Co14A15Ti4Mo4), solution treated and precipitation treated - Hand and die forgings D<(Index)e> 200 mm, R<(Index)m> 1250 MPa (FOREIGN STANDARD)
DIN EN 2197:1999
Aerospace series - Heat resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3), solution treated and precipitation treated - Hand and die forgings, D<(Index)e> 200 mm, R<(Index)m> 1300 MPa (FOREIGN STANDARD)
DIN EN 2187:1999
Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9), solution treated - Sheet, strip and plate, 0,2 mm a 10 mm (FOREIGN STANDARD)
DIN EN 2185:1999
Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9), solution treated - Bar and section, D<(Index)e> 200 mm (FOREIGN STANDARD)
DIN EN 2184:1999
Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9), solution treated - Hand and die forgings, D<(Index)e> 200 mm (FOREIGN STANDARD)
DIN EN 2183:1999
Aerospace series - Heat resisting alloy FE-PA2501 (X4NiCrMoTi43-13), solution treated and precipitation treated - Bar and section D<(Index)e> 200 mm (FOREIGN STANDARD)
DIN EN 2178:2000
Aerospace series - Heat resisting alloy FE-PA2501 (X4NiCrMoTi43-13), solution treated and precipitation treated - Forgings D<(Index)e> 100 mm (FOREIGN STANDARD)
DIN EN 2177:2000
Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15), solution treated and precipitation treated - Sheet, strip and plate 0,5 mm a 10 mm, R<(Index)m> 850 MPa (FOREIGN STANDARD)
DIN EN 2175:1999
Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15), solution treated and precipitation treated - Hand and die forgings D<(Index)e> 100 mm, R<(Index)m> 850 MPa (FOREIGN STANDARD)
DIN EN 2174:1999
Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15), solution treated and precipitation treated - Hand and die forgings D<(Index)e> 100 mm, R<(Index)m> 900 MPa (FOREIGN STANDARD)
DIN EN 2172:1999
Aerospace series - Heat resisting alloy CO-CH1401 (CoCr26Ni11W), not heat treated - Precision castings (FOREIGN STANDARD)
DIN EN 2161:2000
Aerospace series; steel; forging stock and forgings; technical specification; part 3: pre-production and production forgings (FOREIGN STANDARD)
DIN EN 2157-3:1993
Aerospace series; steel; forging stock and forgings; technical specification; part 2: forging stock (FOREIGN STANDARD)
DIN EN 2157-2:1993
Aerospace series; steel; forging stock and forgings; technical specifications; part 1: general requirements (FOREIGN STANDARD)
DIN EN 2157-1:1993
Aerospace series - Test methods for transparent materials for aircraft glazing - Part 7: Determination of optical deviation (FOREIGN STANDARD)
DIN EN 2155-7:1997
Aerospace series - Test methods for transparent materials for aircraft glazing - Part 6: Determination of optical defects (FOREIGN STANDARD)
DIN EN 2155-6:2001
Aerospace series - Test methods for transparent materials for aircraft glazing - Part 4: Determination of ultraviolet light transmission over the wavelength range 280 nm to 360 nm (FOREIGN STANDARD)
DIN EN 2155-4:2001
Aerospace series - Test methods for transparent materials for aircraft glazing - Part 22: Determination of thermal relaxation of stretched acrylic sheet (FOREIGN STANDARD)
DIN EN 2155-22:2001
Aerospace series - Test methods for transparent materials for aircraft glazing - Part 20: Determination of retention of strength after crazing for as-cast acrylics (FOREIGN STANDARD)
DIN EN 2155-20:2001
Aerospace series - Test methods for transparent materials for aircraft glazing - Part 19: Determination of crace resistance (FOREIGN STANDARD)
DIN EN 2155-19:1996
Aerospace series - Test methods for transparent materials for aircraft glazing - Part 12: Determination of linear thermal expansion (FOREIGN STANDARD)
DIN EN 2155-12:1997
Aerospace series - Rivets, solid, universal head, in aluminium alloy 5056A, anodised or chromated, inch based series (FOREIGN STANDARD)
DIN EN 2149:1996
Aerospace series - rivets, solid, universal head, in aluminium alloy 5056A - Inch based series (FOREIGN STANDARD)
DIN EN 2148:1999
Aerospace series - rivets, solid, universal head, in aluminium alloy 2017A - Inch based series (FOREIGN STANDARD)
DIN EN 2146:1999
Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series (FOREIGN STANDARD)
DIN EN 2145:1994
Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, inch based series (FOREIGN STANDARD)
DIN EN 2144:1994
Aerospace series - rivets, solid, universal head, in aluminium 1050A - Inch based series (FOREIGN STANDARD)
DIN EN 2143:1999
Aerospace series - Washers, flat, in steel, cadmium plated (FOREIGN STANDARD)
DIN EN 2138:2000
Aerospace series - Cadmium plating of steels with specified tensile strength 1450 MPa, copper, copper alloys and nickel alloys (FOREIGN STANDARD)
DIN EN 2133:1998
Aerospace series - Plates in aluminium alloys, thickness 6 mma160 mm - Dimensions; German and English version EN 2131:2001 (FOREIGN STANDARD)
DIN EN 2131:2003
Aerospace series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specification (FOREIGN STANDARD)
DIN EN 2130:2002
Aerospace series; aluminium alloy AL-P7075-T73511; drawn bars 6 mm a or D 75 mm (FOREIGN STANDARD)
DIN EN 2128:1993
Aerospace series; aluminium alloy AL-P7075-T73511; extruded bars and sections a or D 100 mm (FOREIGN STANDARD)
DIN EN 2127:1993
Aerospace series; aluminium alloy AL-P7075-T651; plate 6 mm a 80 mm (FOREIGN STANDARD)
DIN EN 2126:1993
Aerospace series - Aluminium alloy AL-P2214-T651 - Plate, 6 mm a 140 mm (FOREIGN STANDARD)
DIN EN 2124:2000
Aerospace series - Aluminium alloy AL-P2618A-T851 - Plate, 6 mm a 140 mm (FOREIGN STANDARD)
DIN EN 2123:2000
Aerospace series - Washers, flat, in aluminium alloy, anodized or chromated (FOREIGN STANDARD)
DIN EN 2122:1996
Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15), solution treated and precipitation treated - Wires 2 mm D 10 mm, R<(Index)m> 960 MPa (FOREIGN STANDARD)
DIN EN 2119:1999
Aerospace series - Aluminium alloy AL-P5056A (5056A)-H32 - Wire for solid rivets - D 10 mm; German and English version prEN 2117:2008 (Foreign Standard)
DIN EN 2117:2009
Aerospace series - Aluminium alloy 2017A-T42 - Wire for solid rivets - D 10 mm; German and English version prEN 2116:2008 (Foreign Standard)
DIN EN 2116:2009
Aerospace series - Aluminium alloy 2117-T4 2 - Wire for solid rivets - D 10 mm; German and English version prEN 2115:2008 (Foreign Standard)
DIN EN 2115:2009
Aerospace series - Acrylonitrile-butadiene elastomer (NBR) - Hardness 40 IRHD (FOREIGN STANDARD)
DIN EN 2104:1996
Aerospace series; aluminium alloy AL-P7009-T74; die forgings 3 mm a 150 mm (FOREIGN STANDARD)
DIN EN 2094:1993
Aerospace series; aluminium alloy AL-P7009-T74; hand forgings 20 mm a 150 mm (FOREIGN STANDARD)
DIN EN 2093:1993
Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0,4 mm a 6 mm; German and English version EN 2092:2005 (FOREIGN STANDARD)
DIN EN 2092:2006
Aerospace series - Aluminium alloy AL-P2024-T3 - Clad sheet and strip 0,3 mm a 6 mm; German and English version EN 2090:2005 (FOREIGN STANDARD)
DIN EN 2090:2006
Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - Sheet and strip - 0,4 mm a 6 mm; German and English version EN 2089:2005 (FOREIGN STANDARD)
DIN EN 2089:2007
Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Clad sheet and strip - 0,4 mm a 6 mm; German and English version EN 2088:2005 (FOREIGN STANDARD)
DIN EN 2088:2007
Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheet and strip - 0,4 mm a 6 mm; German and English version EN 2087:2005 (FOREIGN STANDARD)
DIN EN 2087:2006
Aerospace series - Aluminium alloy AL-P2618A-T851 - Hand and die forgings - a 150 mm; German and English version EN 2086:2004 (FOREIGN STANDARD)
DIN EN 2086:2006
Aerospace series - Aluminium alloy AL-P2618A-T6 - Hand and die forgings - a 150 mm; German and English version EN 2085:2004 (FOREIGN STANDARD)
DIN EN 2085:2007
Aerospace series - Cables, electric, single-core, general purpose, with conductors in copper or copper alloy - Technical specification; German and English version EN 2084:2005 (FOREIGN STANDARD)
DIN EN 2084:2006
Aerospace series - Copper or copper alloys conductors for electrical cables - Product standard (FOREIGN STANDARD)
DIN EN 2083:2001
Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 1: general requirements (FOREIGN STANDARD)
DIN EN 2082-1/A1:1993
Aerospace series - Bearings, precision ball, with flange, in corrosion resisting steel, for instruments and equipment - Dimensions and loads (FOREIGN STANDARD)
DIN EN 2079:1995
Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 1: general requirements (FOREIGN STANDARD)
DIN EN 2076-1/A1:1993
Aerospace series - Aluminium AL-P1050A-H14 - Sheet and strip - 0,4 mm a 6 mm; German and English version EN 2072:2005 (FOREIGN STANDARD)
DIN EN 2072:2007
Aerospace series - Sheets in aluminium and aluminium alloys, thickness 0,25 mma6 mm - Dimensions; German and English version EN 2071:2001 (FOREIGN STANDARD)
DIN EN 2071:2003
Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 1: general requirements (FOREIGN STANDARD)
DIN EN 2070-1/A1:1993
Aerospace series - Rod ends with self-lubricating, self-aligning bearings - Technical specification (FOREIGN STANDARD)
DIN EN 2068:1996
Aerospace series - Rod ends with self-aligning ball bearings - Technical specification (FOREIGN STANDARD)
DIN EN 2067:1996
Aerospace series - Extruded section in aluminium alloys - General tolerances; German and English version EN 2066:2001 (FOREIGN STANDARD)
DIN EN 2066:2003
Aerospace series - Extruded T-section, in aluminium alloys - Dimensions; German and English version EN 2050:2001 (FOREIGN STANDARD)
DIN EN 2050:2002
Aerospace series - Extruded channel section, exruded in aluminium alloys - Dimensions; German and English version EN 2049:2001 (FOREIGN STANDARD)
DIN EN 2049:2002
Aerospace series - Extruded L-section, extruded in aluminium alloys - Dimensions; German and English version EN 2048:2001 (FOREIGN STANDARD)
DIN EN 2048:2002
Aerospace series - Beaded L-section, extruded in aluminium alloys - Dimensions; German and English version EN 2047:2001 (FOREIGN STANDARD)
DIN EN 2047:2002
Aerospace series - Hexagonal bars, drawn, in aluminium and aluminium alloys, tolerance class h11, width across flats 7 mma50 mm - Dimensions; German and English version EN 2046:2001 (FOREIGN STANDARD)
DIN EN 2046:2003
Aerospace series - Square bars, drawn, in aluminium and aluminium alloys, tolerance class h11, thickness 6 mma50 mm - Dimensions; German and English version EN 2045:2001 (FOREIGN STANDARD)
DIN EN 2045:2003
Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings) (FOREIGN STANDARD)
DIN EN 2043:1996
Aerospace series - Strips, cold rolled, in steel - Thickness 0,1 mm a 2,5 mm; dimensions (FOREIGN STANDARD)
DIN EN 2033:1998
Aerospace series; metallic materials; part 2: coding of metallurgical condition in delivery condition (FOREIGN STANDARD)
DIN EN 2032-2:1994
Aerospace series - Metallic materials - Test methods; shear testing for thin flat product (FOREIGN STANDARD)
DIN EN 2021:2000
Aerospace series - Test methods for aluminium and aluminium alloy products - Metallographic determination of cladding thickness and copper diffusion in the cladding for rolled products (FOREIGN STANDARD)
DIN EN 2007:1997
Aerospace series - Test methods for aluminium and aluminium alloy products - Part 7: Reference blocks for the calibration of measuring equipment used in the determination of electrical conductivity of wrought aluminium (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2004-7:1996
Aerospace series; test methods for aluminium and aluminium alloy products; part 5: determination of cladding thickness and copper diffusion of clad semi-finished products (FOREIGN STANDARD)
DIN EN 2004-5:1993
Aerospace series; test methods for aluminium and aluminium alloy products; part 10: preparation of micrographic specimens for aluminium alloys (FOREIGN STANDARD)
DIN EN 2004-10:1994
Aerospace series; test methods for aluminium and aluminium alloy products; part 1: determination of electrical conductivity of wrought aluminium alloys (FOREIGN STANDARD)
DIN EN 2004-1:1993
Aerospace series - Steel; test methods - Part 7: Macrographic test (FOREIGN STANDARD)
DIN EN 2003-7:1997
Aerospace series - Steel; test methods - Part 3: Calibration of pendulum impact machines (FOREIGN STANDARD)
DIN EN 2003-3:1999
Aerospace series - Steels; test methods - Part 2: Izod impact test (FOREIGN STANDARD)
DIN EN 2003-2:2000
Aerospace series - Titanium and titanium alloys - Test methods - Part 010: Sampling for determination of hydrogen content; German and English version EN 2003-010:2007 (FOREIGN STANDARD)
DIN EN 2003-010:2007
Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination; German and English version EN 2003-009:2007 (FOREIGN STANDARD)
DIN EN 2003-009:2007
Aerospace series - Test methods for metallic materials - Part 8: Micrographic determination of grain size (FOREIGN STANDARD)
DIN EN 2002-8:1998
Aerospace series - Metallic materials; test methods - Part 7: Hardness test (FOREIGN STANDARD)
DIN EN 2002-7:1999
Aerospace series - Metallic materials; test methods - Part 6: Bend testing (FOREIGN STANDARD)
DIN EN 2002-6:2000
Aerospace series - Metallic materials; test methods - Part 21: Radiographic testing of castings (FOREIGN STANDARD)
DIN EN 2002-21:2000
Aerospace series - Test methods for metallic materials - Part 20: Eddy current testing of circular cross-section tubes (FOREIGN STANDARD)
DIN EN 2002-20:1996
Aerospace series - Metallic materials; test methods - Part 16: Non-destructive testing, penetrant testing (FOREIGN STANDARD)
DIN EN 2002-16:2000
Aerospace series - Metallic materials; test methods - Part 13: Reserve torsion testing of wire (FOREIGN STANDARD)
DIN EN 2002-13:1999
Aerospace series - Test methods for metallic materials - Part 005: Uninterrupted creep and stress-rupture testing; German and English version EN 2002-005:2007 (FOREIGN STANDARD)
DIN EN 2002-005:2008
Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature; German and English version EN 2002-002:2005, Corrigenda to DIN EN 2002-002:2006-11 (FOREIGN STANDARD)
DIN EN 2002-002 Berichtigung 1:2007
Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature; German and English version EN 2002-002:2005 (FOREIGN STANDARD)
DIN EN 2002-002:2006
Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature; German and English version EN 2002-001:2005, Corrigenda to DIN EN 2002-001:2006-11 (FOREIGN STANDARD)
DIN EN 2002-001 Berichtigung 1:2007
Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature; German and English version EN 2002-001:2005 (FOREIGN STANDARD)
DIN EN 2002-001:2006
Aerospace series - Quality assurance - EN aerospace products; approval of the quality system of manufacturers (FOREIGN STANDARD)
DIN EN 2000:1999
Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction; German version EN 1915-3:2004+A1:2009 (Foreign Standard)
DIN EN 1915-3:2009
Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods; German version EN 1915-2:2001+A1:2009 (Foreign Standard)
DIN EN 1915-2:2009
Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements; German version EN 1915-1:2001+A1:2009 (Foreign Standard)
DIN EN 1915-1:2009
DIN EN 14824:2005
Space engineering - Testing; English version EN 14824:2003 (FOREIGN STANDARD)
DIN EN 14777:2005
Space engineering - Multipaction design and test; English version EN 14777:2004 (FOREIGN STANDARD)
DIN EN 14776:2005
Space engineering - Ground systems and operations - Telemetry and telecommand packet utilization; English version EN 14776:2004 (FOREIGN STANDARD)
DIN EN 14737-2:2005
Space engineering - Ground systems and operations - Part 2: Documents requirements definitions (DRDs); English version EN 14737-2:2004 (FOREIGN STANDARD)
DIN EN 14725:2005
Space engineering - Verification; German and English version EN 14725:2003 (FOREIGN STANDARD)
DIN EN 14724:2005
Space project management - Tailoring of space standards (FOREIGN STANDARD)
DIN EN 14607-8:2005
Space engineering - Mechanical - Part 8: Materials; English version EN 14607-8:2004 (FOREIGN STANDARD)
DIN EN 14607-7:2006
Space engineering - Mechanical - Part 7: Mechanical parts; English version EN 14607-7:2004 (FOREIGN STANDARD)
DIN EN 14607-6:2006
Space engineering - Mechanical - Part 6: Pyrotechnics; English version EN 14607-6:2004 (FOREIGN STANDARD)
DIN EN 14607-5-1:2006
Space engineering - Mechanical - Part 5-1: Liquid and electric propulsion for spacecraft; English version EN 14607-5-1:2004 (FOREIGN STANDARD)
DIN EN 14607-2:2006
Space engineering - Mechanical - Part 2: Structural; English version EN 14607-2:2004 (FOREIGN STANDARD)
DIN EN 14607-1:2006
Space engineering - Mechanical - Part 1: Thermal control; English version EN 14607-1:2004 (FOREIGN STANDARD)
DIN EN 14514:2004
Space engineering standards - Functional analysis; German and English version EN 14514:2004 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 14165:2005
Space engineering standards - Fracture control (FOREIGN STANDARD)
Aerospace - Space engineering - Software; German and English version EN 14160:2001 (FOREIGN STANDARD)
DIN EN 14160:2002
Aerospace - Space product assurance - Material selection for controlling stress-corrosion cracking; German and English version EN 14101:2001 (FOREIGN STANDARD)
DIN EN 14101:2002
Aerospace - Space product assurance - The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment; German and English version EN 14100:2001 (FOREIGN STANDARD)
DIN EN 14100:2002
Aerospace - Space product assurance - Measurement of the peel and pull-off strength of coatings and finishes with pressure-sensitive tapes; German and English version EN 14099:2001 (FOREIGN STANDARD)
DIN EN 14099:2002
Aerospace - Space product assurance - Thermal cycling test for the screening of space materials and processes; German and English version EN 14098:2001 (FOREIGN STANDARD)
DIN EN 14098:2002
Aerospace - Space product assurance - Nonconformance control system; German and English version EN 14097:2001 (FOREIGN STANDARD)
DIN EN 14097:2002
Aerospace - Space project management - Organization and conduct of reviews; German and English version EN 14093:2002 (FOREIGN STANDARD)
DIN EN 14093:2003
Aerospace - Space product assurance - Thermal vacuum outgassing test for the screening of space materials; German and English version EN 14091:2002 (FOREIGN STANDARD)
DIN EN 14091:2003
Aerospace - Space product assurance - Flammability testing for the screening of space materials; German and English version EN 14090:2002 (FOREIGN STANDARD)
DIN EN 14090:2002
Aerospace - Space product assurance - The control of limited-life materials; German and English version EN 14089:2002 (FOREIGN STANDARD)
DIN EN 14089:2003
Aerospace series - Space engineering standards; Policy and principles (FOREIGN STANDARD)
DIN EN 13292:1999
DIN EN 13291-3:2005
Space product assurance - General requirements - Part 3: Materials, mechanical parts and processes (FOREIGN STANDARD)
DIN EN 13291-2:2005
Space product assurance - General requirements - Part 2: Quality assurance; German and English version EN 13291-2:2003 (FOREIGN STANDARD) (FOREIGN STANDARD)
Aerospace series - Space products assurance; General requirements - Part 1: Policy and principles (FOREIGN STANDARD)
DIN EN 13291-1:1999
Aerospace - Space project management; General requirements - Part 7: Cost and schedule management; German and English version EN 13290-7:2001 (FOREIGN STANDARD)
DIN EN 13290-7:2002
Aerospace - Space project management; General requirements - Part 6: Information/documentation management; German and English version EN 13290-6:2001 (FOREIGN STANDARD)
DIN EN 13290-6:2002
Aerospace - Space project management; General requirements - Part 5: Configuration management; German and English version EN 13290-5:2001 (FOREIGN STANDARD)
DIN EN 13290-5:2002
Aerospace - Space project management; General requirements - Part 4: Project phasing and planning; German and English version EN 13290-4:2001 (FOREIGN STANDARD)
DIN EN 13290-4:2002
Aerospace - Space project management; General requirements - Part 3: Project organisation; German and English version EN 13290-3:2001 (FOREIGN STANDARD)
DIN EN 13290-3:2002
Aerospace - Space project management; General requirements - Part 2: Project breakdown structure; German and English version EN 13290-2:2001 (FOREIGN STANDARD)
DIN EN 13290-2:2002
Aerospace series - Space project management; General requirements - Part 1: Policy and principles (FOREIGN STANDARD)
DIN EN 13290-1:1999
Aircraft ground support equipment - Specific requirements - Part 11: Container/Pallet dollies and loose load trailers (FOREIGN STANDARD)
DIN EN 12312-11:2005
Aerospace series - Storage life of rubber products (FOREIGN STANDARD)
DIN 9088:2002
Aerospace; mass breakdown for aircraft heavier than air; dimensional and construction data (FOREIGN STANDARD)
DIN 9020-5:1992
Aerospace; mass breakdown for aircraft heavier than air; detail mass statement (FOREIGN STANDARD)
DIN 9020-4:1983
Aerospace; mass breakdown for aircraft heavier than air; group mass statement; condensed version (FOREIGN STANDARD)
DIN 9020-3 Beiblatt 1:1983
Aerospace; mass breakdown for aircraft heavier than air; group mass statement (FOREIGN STANDARD)
DIN 9020-3:1983
Aerospace; mass breakdown for aircraft heavier than air; main mass groups and terms of mass; definitions (FOREIGN STANDARD)
DIN 9020-2:1983
Aerospace; mass breakdown for aircraft heavier than air; main mass groups and terms of mass; survey (FOREIGN STANDARD)
DIN 9020-1:1983
Aerospace; bending of sheet and strip; stop-drill holes, corner configurations (FOREIGN STANDARD)
DIN 9003-6:1992
Aerospace; bending of light metal sheet and strip; dimensions, limit deviations and compensation values (FOREIGN STANDARD)
DIN 9003-5:1986
Aerospace - Continuous filament fibre reinforced laminates with non-reactive thermoplastics - Preparation of test panels; Text in German and English (Foreign Standard)
DIN 65672:2009
Aerospace - Fabric sheet and tape prepreg from glas fibres and non-reactive thermoplastics - Technical specification; Text in German and English (Foreign Standard)
DIN 65671:2009
Aerospace - Fabric sheet and tape prepreg from aramid fibres and non-reactive thermoplastics - Technical specification; Text in German and English (Foreign Standard)
DIN 65628:2009
Aerospace; titanium-alloy close-tolerance rivets and pure-titanium collars, metric series; technical specification (FOREIGN STANDARD)
DIN 65581:1992
Aerospace; quick-release pins in corrosion-resisting steel, single locked, with pull or push release mechanism (FOREIGN STANDARD)
DIN 65578:1991
Aerospace; quick-release pins in corrosion-resisting steel, single locked, with self-retaining cam lever release mechanism (FOREIGN STANDARD)
DIN 65576:1991
Aerospace; nameplates; directions for design (FOREIGN STANDARD)
DIN 65574:1993
Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 ?C (FOREIGN STANDARD)
DIN 65558:1989
Aerospace; pan head screws with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 ?C (FOREIGN STANDARD)
DIN 65557:1989
Aerospace; hexagon bolts with short-length MJ thread, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 ?C (FOREIGN STANDARD)
DIN 65555:1987
Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 ?C (FOREIGN STANDARD)
DIN 65554:1987
Aerospace - Shims, without hole, for anchor nuts with MJ thread; Not to be used for new designs (FOREIGN STANDARD)
DIN 65553:2001
Aerospace; blind rivets with 100? countersunk head, corrosion-resisting steel, with mandrel, metric series (FOREIGN STANDARD)
DIN 65552:1993
Aerospace; blind rivets with 100? reduced countersunk head, metric series, corrosion-resisting steel, with mandrel (FOREIGN STANDARD)
DIN 65551:1988
Aerospace; rivets, close tolerance with 130? flush head, metric series, titanium alloy (FOREIGN STANDARD)
DIN 65549:1987
Aerospace; rivets, close tolerance with 100? flush head, metric series, titanium alloy (FOREIGN STANDARD)
DIN 65548:1987
Aerospace; rivets, close tolerance, with protruding head, metric series, titanium alloy (FOREIGN STANDARD)
DIN 65547:1987
Aerospace series - Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, corrosion-resisting steel, class: 1100 MPa/315 oC/425 oC (FOREIGN STANDARD)
DIN 65546:2005
Aerospace series - Nuts, hexagon, with MJ-thread, self-locking, corrosion-resisting steel, classification: 1100 MPa/120 ?C (Foreign Standard)
DIN 65545:2008
Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, nickel alloy, nominal tensile strength 1250 MPa, for temperatures up to 315 ?C/425 ?C (FOREIGN STANDARD)
DIN 65542:1987
Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 ?C/425 ?C (FOREIGN STANDARD)
DIN 65541:1987
Aerospace; cheese head bolts, close tolerance, with bihexagon socket and MJ thread, short thread, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 ?C/425 ?C (FOREIGN STANDARD)
DIN 65538:1987
Aerospace; cheese head bolts with bihexagon socket and MJ thread, short thread, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 ?C/425 ?C (FOREIGN STANDARD)
DIN 65537:1987
Aerospace; nuts, hexagon, with MJ-thread, corrosion resisting steel; classification: 1100 MPa/650 ?C (FOREIGN STANDARD)
DIN 65534:1992
Aerospace - Bolts, screws and nuts - Allocation of materials and surface treatments, recommended selection; Text in German and English (Foreign Standard)
DIN 65533:2008
Aerospace series - Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, corrosion-resisting, steel, class: 1250 MPa/315 oC/425 oC (FOREIGN STANDARD)
DIN 65531:2005
Aerospace series - Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, steel, class: 1250 MPa/235 oC (FOREIGN STANDARD)
DIN 65529:2005
Aerospace series - Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, steel, class: 1550 MPa/1800 MPa/235 oC (FOREIGN STANDARD)
DIN 65528:2005
Aerospace - Hexagon bolts, close tolerance, with short-length MJ thread, titanium alloy - Nominal tensile strength 1100 MPa, for temperatures up to 315 ?C (FOREIGN STANDARD)
DIN 65526:1998
Aerospace; bolts, hexagon, close tolerance, with MJ-thread, short thread, steel, nominal tensile strength 1100 MPa, for temperatures up to 235 ?C (FOREIGN STANDARD)
DIN 65525:1992
Aerospace; nuts, hexagon, with MJ thread, captive washer and counterbore, self-locking, steel; class: 1100 MPa/235 ?C (FOREIGN STANDARD)
DIN 65507:2008
Aerospace - Anchor nuts, with MJ-thread, self-locking, pressure tight, two lug, steel; Classification: 900 MPa, air resistant from -55 ?C to 230 ?C (FOREIGN STANDARD)
DIN 65505:2003
Aerospace - Anchor nuts, with MJ thread, self-locking, pressure tight, two lug, steel; Classification: 900 MPa, fuel resistant from -55 ?C to 120 ?C (FOREIGN STANDARD)
DIN 65503:2003
Aerospace - Shims for anchor nuts with MJ-thread (FOREIGN STANDARD)
DIN 65501:2001
Aerospace; polyetherimide (PEI) semi-finished products and moulded parts; technical specification (FOREIGN STANDARD)
DIN 65498:1991
Aerospace; rivet design values, static load, for flush head rivet joints, double shear, dimpled, rivet material 3.1324, metric series (FOREIGN STANDARD)
DIN 65495-402:1990
Aerospace; rivet design values, static load, for flush head rivet joints, double shear, dimpled, rivet material 3.1124, metric series (FOREIGN STANDARD)
DIN 65495-401:1990
DIN EN 2781:1998
Aerospace series - Non-metallic materials; structural adhesives - Test methods; determination of the primer thickness (FOREIGN STANDARD)
DIN EN 2764:1999
Aerospace series - Steel FE-PL1504 (33CrMoV12) air melted, hardened and tempered - Hand and die forgings, D<(Index)e> 80 mm, 1200 MPa R<(Index)m> 1400 MPa (FOREIGN STANDARD)
DIN EN 2763:1999
Aerospace series - Steel FE-PL1504 (33CrMoV12), air melted, hardened and tempered - Bar for machining, D<(Index)e> 80 mm, 1200 MPa R<(Index)m> 1350 MPa (FOREIGN STANDARD)
DIN EN 2756:1996
Aerospace series - Lamps, incandescent - Tests (FOREIGN STANDARD)
DIN EN 2755:1996
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Series elevated loads at ambient temperature; technical specification (FOREIGN STANDARD)
DIN EN 2754:2008
Aerospace series - Nuts, anchor, self locking, two lug, floating with counterbore - Classification: 1100 MPa/235 ?C; German and English version EN 2754:2006 (FOREIGN STANDARD)
DIN Standards : DIN ICS 49 Aircraft and Space Vehicle Engineering
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
