DIN Standards : DIN ICS 49 Aircraft and Space Vehicle Engineering (Page 2)
EN 2754:2006 (FOREIGN STANDARD)
DIN EN 2753:1996
Aerospace series - Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 2747:1998
Aerospace series - Glass fibre reinforced plastics - Tensile test (FOREIGN STANDARD)
DIN EN 2746:1998
Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method (FOREIGN STANDARD)
DIN EN 2743:2003
Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials; German and English version EN 2743:2001 (FOREIGN STANDARD)
DIN EN 2732:2005
Aerospace series - Magnesium alloy MG-C46001-T6 - Chill casting; German and English version EN 2732:2005 (FOREIGN STANDARD)
DIN EN 2731:2006
Aerospace series - Magnesium alloy MG-C46001-T6 - Sand casting; German and English version EN 2731:2005 (FOREIGN STANDARD)
DIN EN 2728:2002
Aerospace series - Aluminium alloy Al-C42101-T6 - Sand casting, a 20 mm (FOREIGN STANDARD)
DIN EN 2726:2002
Aerospace series - Aluminium alloy AL-C42201-T6 -Sand casting, a 20 mm (FOREIGN STANDARD)
DIN EN 2719:2002
Aerospace series - Polycarbonate sheet - Technical specification (FOREIGN STANDARD)
DIN EN 2718:1997
Aerospace series - Aluminium and aluminium alloys - Test method; Measurement of circumferential residual stress in circular tubes with a ratio 10 (FOREIGN STANDARD)
DIN EN 2717:1996
Aerospace series - Test methods - Determination of susceptibility to intergranular corrosion; wrought aluminium alloy products AL-P5XXX-series with a magnesium content 3,5 % (FOREIGN STANDARD)
DIN EN 2716:1996
Aerospace series - Test method - Determination of susceptibility to intergranular corrosion; wrought aluminium alloy products AL-P2XXX-series, AL-P7XXX-series and aluminium-lithium alloys (FOREIGN STANDARD)
DIN EN 2715:1996
Aerospace series - Macrographic examination of aluminium and aluminium alloy wrought products, forging stock and forgings (FOREIGN STANDARD)
DIN EN 2714-013:2006
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 oC and 260 oC - Part 013: DR family, screened (spiral) and jacketed, UV laser printable - Product st (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2714-012:2007
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 260 ?C - Part 012: DM family, screened (braided) and jacketed, UV laser printable - Product st (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2714-011:2007
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 260 ?C - Part 011: DM family, screened (spiral) and jacketed, UV laser printable - Product sta (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2714-010:2007
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 260 ?C - Part 010: Screened (braided) and jacketed, YAG X3 laser printable - Product standard; (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2714-009:2008
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 260 ?C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard; (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2714-008:2007
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 260 ?C - Part 008: Screened (braided) and jacketed, UV laser printable - Product standard; Ger (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2714-007:2007
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 260 ?C - Part 007: Screened (spiral) and jacketed, UV laser printable - Product standard; Germ (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2714-006:2007
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 260 ?C - Part 006: Screened (braided) and jacketed, CO<(Index)2> laser printable - Product sta (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2714-005:2008
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 260 ?C - Part 005: Screened (spiral) and jacketed, CO<(Index)2> laser printable - Product stan (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2714-004:2007
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 260 ?C - Part 004: Screened (braided) and jacketed, ink jet printable - Product standard; Germ (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2714-003:2007
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 260 ?C - Part 003: Screened (spiral) and jacketed, ink jet printable - Product standard; Germa (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2714-002:2007
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 260 ?C - Part 002: Screened and jacketed - General; German and English version EN 2714-002:2005 (FOREIGN STANDARD)
DIN EN 2713-011:2007
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 200 ?C - Part 011: Silver plated copper, screened (spiral) and jacketed, UV laser printable - (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2713-010:2007
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 200 ?C - Part 010: Screened (braided) and jacketed, YAG X3 laser printable - Product standard; (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2713-009:2007
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 200 ?C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard; (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2713-008:2007
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 200 ?C - Part 008: Screened (braided) and jacketed, UV laser printable - Product standard; Ger (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2713-007:2007
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 200 ?C - Part 007: Screened (spiral) and jacketed, UV laser printable - Product standard; Germ (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2713-006:2007
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 200 ?C - Part 006: Screened (braided) and jacketed, CO<(Index)2>-laser printable - Product sta (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2713-005:2007
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 200 ?C - Part 005: Screened (spiral) and jacketed, CO<(Index)2>-laser printable - Product stan (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2713-004:2007
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 200 ?C - Part 004: Screened (braided) and jacketed, ink jet printable - Product standard; Germ (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2713-003:2007
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 200 ?C - Part 003: Screened (spiral) and jacketed, ink jet printable - Product standard; Germa (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2713-002:2007
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 200 ?C - Part 002: Screened and jacketed - General; German and English version EN 2713-002:2006 (FOREIGN STANDARD)
DIN EN 2712-010:1995
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 150 ?C - Part 010: Screened (braided) and jacketed, YAG X3 laser printable; product standard (FOREIGN STANDARD)
DIN EN 2712-009:1995
Aerospace series - Cables, electrical, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 150 ?C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable; product standard (FOREIGN STANDARD)
DIN EN 2712-008:1995
Aerospace series - Cables, electrical, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 150 ?C - Part 008: Screened (braided) and jacketed, UV laser printable; product standard (FOREIGN STANDARD)
DIN EN 2712-007:1995
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 150 ?C - Part 007: Screened (spiral) and jacketed; UV laser printable; product standard (FOREIGN STANDARD)
DIN EN 2712-006:1995
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 150 ?C - Part 006: Screened (braided) and jacketed; CO<(Index)2> laser printable; product standard (FOREIGN STANDARD)
DIN EN 2712-005:1995
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 150 ?C - Part 005: Screened (spiral) and jacketed; CO<(Index)2> laser printable; product standard (FOREIGN STANDARD)
DIN EN 2712-004:1995
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 150 ?C - Part 004: Screened (braided) and jacketed; ink jet printable; product standard (FOREIGN STANDARD)
DIN EN 2712-003:1995
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 150 ?C - Part 003: Screened (spiral) and jacketed; ink jet printable; product standard (FOREIGN STANDARD)
DIN EN 2712-002:1995
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 ?C and 150 ?C - Part 002: Screened and jacketed; general (FOREIGN STANDARD)
DIN EN 2703:2006
Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Clad sheet and strip - 0,3 mm a 6 mm; German and English version EN 2703:2005 (FOREIGN STANDARD)
DIN EN 2702:2006
Aerospace series - Aluminium alloy AL-P6061 - T6 or T62 - Drawn or extruded bar and section - a or D 200 mm; German and English version EN 2702:2005 (FOREIGN STANDARD)
DIN EN 2696:2006
Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Sheet and strip - 0,4 mm a 6 mm; German and English version EN 2696:2005 (FOREIGN STANDARD)
DIN EN 2695:2006
Aerospace series - Aluminium alloy AL-P6081-T6 - Sheet and strip - 0,3 mm a 6 mm; German and English version EN 2695:2005 (FOREIGN STANDARD)
DIN EN 2694:2006
Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Sheet and strip - 0,4 mm a 6 mm; German and English version EN 2694:2005 (FOREIGN STANDARD)
DIN EN 2693:2006
Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm a 6 mm; German and English version EN 2693:2005 (FOREIGN STANDARD)
DIN EN 2690:1999
Aerospace series - Aluminium alloy AL-P7050-T7452 - Hand forgings a 200 mm (FOREIGN STANDARD)
DIN EN 2688:1998
Aerospace series - Aluminium alloy AL-P7050-T74 - Die forgings a 150 mm (FOREIGN STANDARD)
DIN EN 2687:2006
Aerospace series - Aluminium alloy AL-P7010-T7451 - Plate - 6 mm a 160 mm; German and English version EN 2687:2004 (FOREIGN STANDARD)
DIN EN 2686:1998
Aerospace series - Aluminium alloy AL-P7010-T7451 - Hand forgings a 150 mm (FOREIGN STANDARD)
DIN EN 2684:2006
Aerospace series - Aluminium alloy AL-P7010-T7651 - Plate - 6 mm a 140 mm; German and English version EN 2684:2004 (FOREIGN STANDARD)
DIN EN 2683:1998
Aerospace series - Aluminium alloy AL-P7010-T7651 - Hand forgings a 150 mm (FOREIGN STANDARD)
DIN EN 2682:1998
Aerospace series - Aluminium alloy AL-P7010-T7452 - Hand and die forgings a 150 mm (FOREIGN STANDARD)
DIN EN 2681:2006
Aerospace series - Aluminium alloy AL-P7010-T74 - Hand and die forgings - a 150 mm; German and English version EN 2681:2004 (FOREIGN STANDARD)
DIN EN 2680:2007
Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS<(Index)2> lubricated, metric series - Classification: 900 MPa (at ambient temperature)/235 ?C; German (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2667-6:2003
Aerospace series - Non-metallic materials; Foaming structural adhesives; Test methods - Part 6: Determination of water absorption; German and English version EN 2667-6:2001 (FOREIGN STANDARD)
DIN EN 2667-5:1997
Aerospace series - Non-metallic materials; foaming structural adhesive films, test methods - Part 5: Exothermicity (FOREIGN STANDARD)
DIN EN 2667-4:1997
Aerospace series - Non-metallic materials; foaming structural adhesive films, test methods - Part 4: Vertical slump (FOREIGN STANDARD)
DIN EN 2667-3:1997
Aerospace series - Non-metallic materials; foaming structural adhesive films, test methods - Part 3: Expansion ratio and volatile content (FOREIGN STANDARD)
DIN EN 2667-2:1997
Aerospace series - Non-metallic materials; foaming structural adhesives, test methods - Part 2: Compressive tube shear (FOREIGN STANDARD)
DIN EN 2667-1:1997
Aerospace series - Non-metallic materials; foaming structural adhesives, test methods - Part 1: Tensile single-lap shear (FOREIGN STANDARD)
DIN EN 2665-004:1999
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals; product standard (FOREIGN STANDARD)
DIN EN 2665-003:1999
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 003: Metric thread terminals; product standard (FOREIGN STANDARD)
DIN EN 2665-001:1999
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification (FOREIGN STANDARD)
DIN EN 2663:1998
Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) solution treated - Sheet, strip and plate, 0,2 mm a 10 mm (FOREIGN STANDARD)
DIN EN 2662:1998
Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) annealed - Sheet, strip and plate, 0,2 mm a 10 mm (FOREIGN STANDARD)
DIN EN 2661:1995
Aerospace series - Heat resisting alloy CO-PH1402 - Consumable electrode remelted, solution treated, sheet and strip a 3 mm; R<(Index)m> 860 MPa (FOREIGN STANDARD)
DIN EN 2660:1995
Aerospace series - Heat resisting alloy CO-CH1401 - As cast, remelting stock (FOREIGN STANDARD)
DIN EN 2659:1995
Aerospace series - Heat resisting alloy CO-PH1402 - Consumable electrode remelted, solution treated, forgings D<(Index)e> 100 mm; R<(Index)m> 860 MPa (FOREIGN STANDARD)
DIN EN 2658:1995
Aerospace series - Heat resisting alloy CO-PH1402 - Consumable electrode remelted, as forged, forging stock D<(Index)e> 360 mm (FOREIGN STANDARD)
DIN EN 2657:1995
Aerospace series - Heat resisting alloy CO-PH1402 - Consumable electrode remelted, solution treated, bar a or D 150 mm; R<(Index)m> 860 MPa (FOREIGN STANDARD)
DIN EN 2656:2002
Aerospace series - Pipe coupling - Coupling end, welded; Geometric configuration; German version EN 2656:2001 (FOREIGN STANDARD)
DIN EN 2654:1996
Aerospace series - Screws, 100? countersunk normal head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 ?C (FOREIGN STANDARD)
DIN EN 2653:1996
Aerospace series - Screws, 100? countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 2652:1997
Aerospace series - Screws, 100? countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 2651:1996
Aerospace series - Screws, pan head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 ?C (FOREIGN STANDARD)
DIN EN 2650:1996
Aerospace series - Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 2649:1995
Aerospace series - Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 2648:1995
Aerospace series - Washers, concave, in alloy steel, cadmium plated (FOREIGN STANDARD)
DIN EN 2647:2007
Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 ?C; German and English version EN 2647:2006 (FOREIGN STANDARD)
DIN EN 2646:1999
Aerospace series - Nipples, lubricating, axial type, in steel, cadmium plated (FOREIGN STANDARD)
DIN EN 2645:2007
Aerospace series - Lockrings for adaptors, threaded, with lockring - Dimensions; German and English version EN 2645:2005 (FOREIGN STANDARD)
DIN EN 2644:1998
Aerospace series - Rod assemblies for flight controls - Technical specification (FOREIGN STANDARD)
DIN EN 2642:1996
Aerospace series - Structural adhesive systems - Adhesive film; technical specification (FOREIGN STANDARD)
DIN EN 2636:1994
Aerospace series; aluminium alloy AL-P6082-T6; extruded bars and sections; a or D 200 mm, with peripheral coarse grain control (FOREIGN STANDARD)
DIN EN 2635:2006
Aerospace series - Aluminium alloy AL-P2014A-T6511 - Extruded bar and section - a or D 200 mm with peripheral coarse grain control; German and English version EN 2635:2005 (FOREIGN STANDARD)
DIN EN 2633:1994
Aerospace series; aluminium alloy AL-P2024-T3511; extruded bars and sections; 1,2 mm a or D 150 mm, with peripheral coarse grain control (FOREIGN STANDARD)
DIN EN 2632:2007
Aerospace series - Aluminium alloy AL-P7075-T73511 - Extruded bar and section - a or D 150 mm with peripheral coarse grain control; German and English version EN 2632:2005 (FOREIGN STANDARD)
DIN EN 2630:1994
Aerospace series; aluminium alloy AL-P7009-T74511; extruded bars and sections; a or D 125 mm, with peripheral coarse grain control (FOREIGN STANDARD)
DIN EN 2624:2008
Aerospace series - Pressure impulse testing of hydraulic system components; German and English version EN 2624:2007 (FOREIGN STANDARD)
DIN EN 2608:2006
Aerospace series - Installation and removal requirements for 8?30' adaptors, threaded, with lockring; German and English version EN 2608:2005 (FOREIGN STANDARD)
DIN EN 2607:2007
Aerospace series - O-rings for adaptors, threaded, with lockring - Survey; German and English version EN 2607:2005 (FOREIGN STANDARD)
DIN EN 2606:2009
Aerospace series - 60? interface for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2606:2009 (Foreign Standard)
DIN EN 2605:2007
Aerospace series - 24? interface for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2605:2005 (FOREIGN STANDARD)
DIN EN 2604:2007
Aerospace series - 8? 30' interface for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2604:2005 (FOREIGN STANDARD)
DIN EN 2603:2007
Aerospace series - Port ends for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2603:2005 (FOREIGN STANDARD)
DIN EN 2602:2007
Aerospace series - Ports for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2602:2005 (FOREIGN STANDARD)
DIN EN 2601:1996
Aerospace series - Fork ends, adjustable - Technical specification (FOREIGN STANDARD)
DIN EN 2599:2002
Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm a 3,2 mm; Dimensions (FOREIGN STANDARD)
DIN EN 2597:1998
Aerospace series - Carbon fibre reinforced plastics; unidirectional laminates - Tensile test perpendicular to the fibre direction (FOREIGN STANDARD)
DIN EN 2596:2007
Aerospace series - Washers, lock, with radial serrations in corrosion resisting steel, cadmium plated for flight control rods - Dimensions; German and English version EN 2596:2006 (FOREIGN STANDARD)
DIN EN 2591-E4:1996
Aerospace series - Elements of electrical and optical connection; test methods - Part E4: Residual magnetism (FOREIGN STANDARD)
DIN EN 2591-7301:2003
Aeospace series - Elements of electrical and optical connection; Test methods - Part 7301: Electrical elements; Temperature endurance of couplers; German and English version EN 2591-7301:2001 (FOREIGN STANDARD)
DIN EN 2591-709:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 709: Electrical elements; Tensile strength of couplers; German and English version EN 2591-709:2001 (FOREIGN STANDARD)
DIN EN 2591-708:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 708: Electrical elements; Measurement of surface transfer impedance of couplers; German and English version EN 2591-708:2001 (FOREIGN STANDARD)
DIN EN 2591-707:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 707: Electrical elements; Measurement of characteristic impedance of a bus or a stub terminator; German and English version EN 2591-707:2001 (FOREIGN STANDARD)
DIN EN 2591-706:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 706: Electrical elements; Transmission test; German and English version EN 2591-706:2001 (FOREIGN STANDARD)
DIN EN 2591-705:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 705: Electrical elements; Measurement of stub input impedance of couplers; German and English version EN 2591-705:2001 (FOREIGN STANDARD)
DIN EN 2591-704:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 704: Electrical elements; Measurement of turns ratio on a transformer used in a coupler; German and English version EN 2591-704:2001 (FOREIGN STANDARD)
DIN EN 2591-703:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 703: Electrical elements; Common mode rejection of couplers; German and English version EN 2591-703:2001 (FOREIGN STANDARD)
DIN EN 2591-702:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 702: Electrical elements; Measurement of signal distortion of couplers; German and English version EN 2591-702:2001 (FOREIGN STANDARD)
DIN EN 2591-701:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 701: Electrical elements; Measurement of open circuit impedance of couplers; German and English version EN 2591-701:2001 (FOREIGN STANDARD)
DIN EN 2591-6415:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6415: Optical elements; Test probe damage; German and English version EN 2591-6415:2001 (FOREIGN STANDARD)
DIN EN 2591-6414:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6414: Optical elements; Unmating of lanyard release optical connection elements; German and English version EN 2591-6414:2001 (FOREIGN STANDARD)
DIN EN 2591-6406:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6406: Optical elements; Mechanical endurance; German and English version EN 2591-6406:2001 (FOREIGN STANDARD)
DIN EN 2591-6405:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6405: Optical elements; Axial load; German and English version EN 2591-6405:2001 (FOREIGN STANDARD)
DIN EN 2591-6404:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6404: Optical elements; Transverse load; German and English version EN 2591-6404:2001 (FOREIGN STANDARD)
DIN EN 2591-6403:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6403: Optical elements; Vibrations; German and English version EN 2591-6403:2001 (FOREIGN STANDARD)
DIN EN 2591-6402:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6402: Optical elements; Chocs; German and English version EN 2591-6402:2001 (FOREIGN STANDARD)
DIN EN 2591-6401:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6401: Optical elements; Acceleration steady state; German and English version EN 2591-6401:2001 (FOREIGN STANDARD)
DIN EN 2591-6324:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6324: Optical elements; Interfacial sealing; German and English version EN 2591-6324:2001 (FOREIGN STANDARD)
DIN EN 2591-6323:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6323: Optical elements; Thermal shock (hermetically sealed devices); German version EN 2591-6323:2002 (FOREIGN STANDARD)
DIN EN 2591-6321:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6321: Optical elements; Damp heat, cyclic test; German version EN 2591-6321:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 2591-6318:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6318: Optical elements; Fire resistance; German and English version EN 2591-6318:2001 (FOREIGN STANDARD)
DIN EN 2591-6317:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6317: Optical elements; Flammability; German and English version EN 2591-6317:2001 (FOREIGN STANDARD)
DIN EN 2591-6316:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6316: Optical elements; Ozone resistance; German and English version EN 2591-6316:2001 (FOREIGN STANDARD)
DIN EN 2591-6315:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6315: Optical elements; Fluid resistance; German and English version EN 2591-6315:2001 (FOREIGN STANDARD)
DIN EN 2591-6314:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6314: Optical elements; Immersion at low air pressure; German and English version EN 2591-6314:2001 (FOREIGN STANDARD)
DIN EN 2591-6307:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6307: Optical elements; Salt mist; German and English version EN 2591-6307:2001 (FOREIGN STANDARD)
DIN EN 2591-6306:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6306: Optical elements; Mould growth; German and English version EN 2591-6306:2001 (FOREIGN STANDARD)
DIN EN 2591-6305:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6305: Optical elements; Rapid change of temperature; German and English version EN 2591-6305:2001 (FOREIGN STANDARD)
DIN EN 2591-6303:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6303: Optical elements; Cold/low pressure and damp heat; German and English version EN 2591-6303:2001 (FOREIGN STANDARD)
DIN EN 2591-6301:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6301: Optical elements; Endurance at temperature; German and English version EN 2591-6301:2001 (FOREIGN STANDARD)
DIN EN 2591-617:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 617: Optical elements; Temperature cycling; German version EN 2591-617:2002 (FOREIGN STANDARD)
DIN EN 2591-615:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 615: Optical elements; Connection integrity at temperature; German and English version EN 2591-615:2001 (FOREIGN STANDARD)
DIN EN 2591-614:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 614: Optical elements; Connector radial compression; German version EN 2591-614:2002 (FOREIGN STANDARD)
DIN EN 2591-613:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 613: Optical elements; Impact test; German version EN 2591-613:2002 (FOREIGN STANDARD)
DIN EN 2591-612:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 612: Optical elements; Effectiveness of cable attachment; Cable axial compression; German and English version EN 2591-612:2001 (FOREIGN STANDARD)
DIN EN 2591-611:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 611: Optical elements; Effectiveness of cable attachment; Cable torsion; German and English version EN 2591-611:2001 (FOREIGN STANDARD)
DIN EN 2591-6101:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6101: Optical elements; Visual examination; German and English version EN 2591-6101:2001 (FOREIGN STANDARD)
DIN EN 2591-610:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 610: Optical elements; Effectiveness of cable attachment; Cable pulling; German and English version EN 2591-610:2001 (FOREIGN STANDARD)
DIN EN 2591-609:2006
Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cyclic flexing; German and English version EN 2591-609:2005 (FOREIGN STANDARD)
DIN EN 2591-607:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 607: Optical elements; Immunity to ambient light coupling; German version EN 2591-607:2002 (FOREIGN STANDARD)
DIN EN 2591-606:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 606: Optical elements; Crosstalk; German version EN 2591-606:2002 (FOREIGN STANDARD)
DIN EN 2591-605:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 605: Optical elements; Return loss; German version EN 2591-605:2002 (FOREIGN STANDARD)
DIN EN 2591-604:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 604: Optical elements; Cleaning capability of optical face; German and English version EN 2591-604:2001 (FOREIGN STANDARD)
DIN EN 2591-603:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 603: Optical elements; Change of power distribution; German version EN 2591-603:2002 (FOREIGN STANDARD)
DIN EN 2591-602:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 602: 0ptical elements; Variation of attenuation and optical discontinuity; German and English version EN 2591-602:2001 (FOREIGN STANDARD)
DIN EN 2591-601:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 601: Optical elements; Insertion loss; German and English version EN 2591-601:2001 (FOREIGN STANDARD)
DIN EN 2591-515:2006
Aerospace series - Elements of electrical and optical connection - Test methods - Part 515: Hydrolytic stability; German and English version EN 2591-515:2005 (FOREIGN STANDARD)
DIN EN 2591-514:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 514: Solderability of contacts with self-contained solder and flux; German and English version EN 2591-514:2002 (FOREIGN STANDARD)
DIN EN 2591-513:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 513: Magnetic permeability; German and English version EN 2591-513:2002 (FOREIGN STANDARD)
DIN EN 2591-512:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 512: Effectiveness of non-removable fixing of hermetically sealed connector shell; German and English version EN 2591-512:2002 (FOREIGN STANDARD)
DIN EN 2591-509:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 509: Adhesion of coating on contacts; German and English version EN 2591-509:2001 (FOREIGN STANDARD)
DIN EN 2591-508:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 508: Measurement of thickness of coating on contacts; German and English version EN 2591-508:2001 (FOREIGN STANDARD)
DIN EN 2591-507:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 507: Plating porosity; German and English version EN 2591-507:2002 (FOREIGN STANDARD)
DIN EN 2591-506:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 506: Use of tools; German and English version EN 2591-506:2001 (FOREIGN STANDARD)
DIN EN 2591-505:2002
Aeospace series - Elements of electrical and optical connection; Test methods - Part 505: Contact protection effectiveness (scoop-proof); German and English version EN 2591-505:2001 (FOREIGN STANDARD)
DIN EN 2591-503:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 503: Contact deformation after crimping; German and English version EN 2591-503:2001 (FOREIGN STANDARD)
DIN EN 2591-502:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 502: Restricted entry; German and English version EN 2591-502:2001 (FOREIGN STANDARD)
DIN EN 2591-501:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 501: Soft solderability; German and English version EN 2591-501:2002 (FOREIGN STANDARD)
DIN EN 2591-428:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs; German and English version EN 2591-428:2002 (FOREIGN STANDARD)
DIN EN 2591-423:2006
Aerospace series - Elements of electrical and optical connection - Test methods - Part 423: Connector rear accessories thread strength; German and English version EN 2591-423:2005 (FOREIGN STANDARD)
DIN EN 2591-422:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 422: Locking wire hole strength; German and English version EN 2591-422:2002 (FOREIGN STANDARD)
DIN EN 2591-421:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 421: Free fall; German and English version EN 2591-421:2002 (FOREIGN STANDARD)
DIN EN 2591-420:2007
Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories; German and English version EN 2591-420:2006 (FOREIGN STANDARD)
DIN EN 2591-419:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 419: Stability of male contacts in insert; German and English version EN 2591-419:2001 (FOREIGN STANDARD)
DIN EN 2591-418:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 418: Gauge insertion/extraction forces (female contacts); German and English version EN 2591-418:2001 (FOREIGN STANDARD)
DIN EN 2591-417:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 417: Tensile strength (crimped connection); German and English version EN 2591-417:2001 (FOREIGN STANDARD)
DIN EN 2591-416:2002
Aerospace series - Elements of electrical and optical connection; Test methods - Part 416: Contact bending strength; German and English version EN 2591-416:2001 (FOREIGN STANDARD)
DIN EN 2591-415:2002
Aerospace series - Elements of electrical and optical connections; Test methods - Part 415: Test probe damage (female contacts); German and English version EN 2591-415:2001 (FOREIGN STANDARD)
DIN EN 2591-414:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 414: Unmating of lanyard release connectors (FOREIGN STANDARD)
DIN EN 2591-413:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 413: Holding force of grounding spring system (FOREIGN STANDARD)
DIN EN 2591-412:1999
Aerospace series -Elements of electrical and optical connection; test methods - Part 412: Contact insertion and extraction forces (FOREIGN STANDARD)
DIN EN 2591-411:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 411: Insert retention in housing (torsional) (FOREIGN STANDARD)
DIN EN 2591-410:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 410: Insert retention in housing (axial) (FOREIGN STANDARD)
DIN EN 2591-409:1999
Aerospace series -Elements of electrical and optical connection; test methods - Part 409: Contact retention in insert (FOREIGN STANDARD)
DIN EN 2591-408:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 408: Mating and unmating forces (FOREIGN STANDARD)
DIN EN 2591-407:1999
Aerospace series - Elements of electrical and optical connection; test methods - Part 407: Durability of contact retention system and seals (FOREIGN STANDARD)
DIN EN 2591-406:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 406: Mechanical endurance (FOREIGN STANDARD)
DIN EN 2591-405:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 405: Axial load (FOREIGN STANDARD)
DIN EN 2591-404:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 404: Transverse load (FOREIGN STANDARD)
DIN EN 2591-403:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 403: Sinusoidal and random vibration (FOREIGN STANDARD)
DIN EN 2591-402:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 402: Shock (FOREIGN STANDARD)
DIN EN 2591-325:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 325: Ice resistance; German and English version EN 2591-325:2002 (FOREIGN STANDARD)
DIN EN 2591-324:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 324: Interfacial sealing (FOREIGN STANDARD)
DIN EN 2591-323:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 323: Thermal shock (FOREIGN STANDARD)
DIN EN 2591-322:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 322: Hermeticity (FOREIGN STANDARD)
DIN EN 2591-321:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 321: Damp heat, cyclic test (FOREIGN STANDARD)
DIN EN 2591-320:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 320: Simulated solar radiation at ground level (FOREIGN STANDARD)
DIN EN 2591-319:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 319: Gastightness of solderless wrapped connections (FOREIGN STANDARD)
DIN EN 2591-318:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 318: Fire-resistance (FOREIGN STANDARD)
DIN EN 2591-317:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 317: Flammability (FOREIGN STANDARD)
DIN EN 2591-316:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 316: Ozone resistance (FOREIGN STANDARD)
DIN EN 2591-315:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 315: Fluid resistance (FOREIGN STANDARD)
DIN EN 2591-314:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 314: Immersion at low air pressure (FOREIGN STANDARD)
DIN EN 2591-313:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 313: Artificial rain (FOREIGN STANDARD)
DIN EN 2591-312:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 312: Air leakage (FOREIGN STANDARD)
DIN EN 2591-311:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 311: Low air pressure (FOREIGN STANDARD)
DIN EN 2591-310:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 310: Cold (FOREIGN STANDARD)
DIN EN 2591-309:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 309: Dry heat (FOREIGN STANDARD)
DIN EN 2591-308:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 308: Sand and dust (FOREIGN STANDARD)
DIN EN 2591-307:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 307: Salt mist (FOREIGN STANDARD)
DIN EN 2591-306:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 306: Mould growth (FOREIGN STANDARD)
DIN EN 2591-305:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 305: Rapid change of temperature (FOREIGN STANDARD)
DIN EN 2591-304:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 304: Damp heat steady state (FOREIGN STANDARD)
DIN EN 2591-303:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 303: Cold/low pressure and damp heat (FOREIGN STANDARD)
DIN EN 2591-302:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 302: Climatic sequence (FOREIGN STANDARD)
DIN EN 2591-226:2009
Aerospace series - Elements of electrical and optical connection - Test methods - Part 226: Corona level; German and English version EN 2591-226:2007 (Foreign Standard)
DIN EN 2591-225:2009
Aerospace series - Elements of electrical and optical connection - Test methods - Part 225: RF high potential withstanding voltage; German and English version EN 2591-225:2007 (Foreign Standard)
DIN EN 2591-224:2009
Aerospace series - Elements of electrical and optical connection - Test methods - Part 224: RF leakage; German and English version EN 2591-224:2007 (Foreign Standard)
DIN EN 2591-223:2009
Aerospace series - Elements of electrical and optical connection - Test methods - Part 223: Measurement of characteristic impedance of a coaxial connector or contact; German and English version EN 2591-223:2007 (Foreign Standard)
DIN EN 2591-222:2009
Aerospace series - Elements of electrical and optical connection - Test methods - Part 222: Insertion Loss (I.L.); German and English version EN 2591-222:2007 (Foreign Standard)
DIN EN 2591-221:2009
Aerospace series - Elements of electrical and optical connection - Test methods - Part 221: Voltage Standing Wave Ratio (VSWR); German and English version EN 2591-221:2007 (Foreign Standard)
DIN EN 2591-220:2006
Aerospace series - Elements of electrical and optical connection - Test methods - Part 220: Contact/conductor joint ageing by current and temperature cycling; German and English version EN 2591-220:2005 (FOREIGN STANDARD)
DIN EN 2591-219:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 219: Voltage strength for insulated terminal lugs and in-line splices; German and English version EN 2591-219:2002 (FOREIGN STANDARD)
DIN EN 2591-218:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling; German and English version EN 2591-218:2002 (FOREIGN STANDARD)
DIN EN 2591-217:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 217: Voltage drop under specified current for terminal lugs and in-line splices; German and English version EN 2591-217:2002 (FOREIGN STANDARD)
DIN EN 2591-216:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 216: Engagement depth of contacts (FOREIGN STANDARD)
DIN EN 2591-214:2006
Aerospace series - Elements of electrical and optical connection - Test methods - Part 214: Lightning strike, current and voltage pulse; German and English version EN 2591-214:2005 (FOREIGN STANDARD)
DIN EN 2591-213:1997
Aerospace series - Elements of electrical and optical connection; test methods - Part 213: Shielding effectiveness from 100 MHz to 1 GHz (FOREIGN STANDARD)
DIN EN 2591-212:2006
Aerospace series - Elements of electrical and optical connection - Test methods - Part 212: Surface transfer impedance; German and English version EN 2591-212:2005 (FOREIGN STANDARD)
DIN EN 2591-211:2003
Aerospace series - Elements of electrical and optical connection; Test methods - Part 211: Capacitance; German and English version EN 2591-211:2002 (FOREIGN STANDARD)
DIN EN 2591-210:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 210: Electrical overload (FOREIGN STANDARD)
DIN EN 2591-209:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 209: Current temperature derating (FOREIGN STANDARD)
DIN EN 2591-208:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 208: Temperature rise due to rated current (FOREIGN STANDARD)
DIN EN 2591-207:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 207: Voltage proof test (FOREIGN STANDARD)
DIN EN 2591-206:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 206: Measurement of insulation resistance (FOREIGN STANDARD)
DIN EN 2591-205:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 205: Housing (shell) electrical continuity (FOREIGN STANDARD)
DIN EN 2591-204:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 204: Discontinuity of contacts in the microsecond range (FOREIGN STANDARD)
DIN EN 2591-203:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 203: Electrical continuity at microvolt level (FOREIGN STANDARD)
DIN EN 2591-202:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 202: Contact resistance at rated current (FOREIGN STANDARD)
DIN EN 2591-201:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 201: Contact resistance, low level (FOREIGN STANDARD)
DIN EN 2591-102:1998
Aerospace series - Elements of electrical and optical connection; test methods - Part 102: Examination of dimensions and mass (FOREIGN STANDARD)
DIN EN 2591-101:1994
Aerospace series - Elements of electrical and optical connection; test methods - Part 101: Visual examination (FOREIGN STANDARD)
DIN EN 2591-100:2006
Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General; German and English version EN 2591-100:2005 (FOREIGN STANDARD)
DIN EN 2590:1993
Aerospace series; steel; sheets and plates, hot rolled; dimensions (FOREIGN STANDARD)
DIN EN 2589:1995
Aerospace series - Steel - Sheet and strip, cold rolled; thickness 0,1 mm a 3 mm; dimensions (FOREIGN STANDARD)
DIN EN 2588:2006
Aerospace series - Bearings, spherical plain in corrosion resisting steel with assembly slots - Dimensions and loads; German and English version EN 2588:2006 (FOREIGN STANDARD)
DIN EN 2585:2006
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 2585:2001 (FOREIGN STANDARD)
DIN EN 2583:1997
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy, NI-PH2601 (Inconel 718); classification: 1275 MPa (at ambient temperature)/650 ?C; technical specification (FOREIGN STANDARD)
DIN EN 2573:2007
Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Softened - R<(Index)m> 780 MPa - Wire - 0,25 mm D<(Index)e> 3 mm; German and English version EN 2573:2007 (FOREIGN STANDARD)
DIN EN 2570:1996
Aerospace series - Nickel-cadmium batteries - Technical specification (FOREIGN STANDARD)
DIN EN 2568:1995
Aerospace series - Fluorocarbon rubber (FPM) - Hardness 90 IRHD (FOREIGN STANDARD)
DIN EN 2567:1995
Aerospace series - Fluorocarbon rubber (FPM) - Hardness 80 IRHD (FOREIGN STANDARD)
DIN EN 2566:1995
Aerospace series - Fluorocarbon rubber (FPM) - Hardness 70 IRHD (FOREIGN STANDARD)
DIN EN 2565:1993
Aerospace series; preparation of carbon fibre reinforced resin panels for test purposes (FOREIGN STANDARD)
DIN EN 2564:1998
Aerospace series - Carbon fibre laminates - Determination of the fibre-, resin- and void contents (FOREIGN STANDARD)
DIN EN 2563:1997
Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; determination of apparent interlaminar shear strength (FOREIGN STANDARD)
DIN EN 2562:1997
Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; flexural test parallel to the fibre direction (FOREIGN STANDARD)
DIN EN 2561:1995
Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction (FOREIGN STANDARD)
DIN EN 2560:1998
Aerospace series - Carbon fibre preimpregnates - Determmination of the resin flow (FOREIGN STANDARD)
DIN EN 2559:1997
Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area (FOREIGN STANDARD)
DIN EN 2558:1997
Aerospace series - Carbon fibre preimpregnates - Determination of the volatile content (FOREIGN STANDARD)
DIN EN 2557:1997
Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area (FOREIGN STANDARD)
DIN EN 2556:1999
Aerospace series - Rivets, solid, 100? normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series (FOREIGN STANDARD)
DIN EN 2555:1999
Aerospace series - Rivets, solid, 100? countersunk normal head with dome, in aluminium alloy 5056A, inch based series (FOREIGN STANDARD)
DIN EN 2553:1999
Aerospace series - Rivets, solid, 100? countersunk normal head with dome, in aluminium alloy 2017A, inch based series (FOREIGN STANDARD)
DIN EN 2552:1999
Aerospace series - Rivets, solid, 100? normal countersunk head with dome, in aluminium alloy 2117, anodised or chromated, inch based series (FOREIGN STANDARD)
DIN EN 2551:1999
Aerospace series - Rivets, solid, 100? normal countersunk head with dome, in aluminium alloy 2117, inch based series (FOREIGN STANDARD)
DIN EN 2549:2007
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated, metric series - Classification: 1 100 MPa (at ambient temperature)/315 (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2546:2006
Aerospace series - Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods - Dimensions; German and English version EN 2546:2006 (FOREIGN STANDARD)
DIN EN 2545-3:1995
Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 3: Pre-productions and production castings (FOREIGN STANDARD)
DIN EN 2545-2:1995
Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 2: Remelting stock (FOREIGN STANDARD)
DIN EN 2545-1:1995
Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 1: General requirements (FOREIGN STANDARD)
DIN EN 2543:2009
Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Sheet and strip - 0,3 mm a 2 mm - For prevailing torque nuts; German and English version EN 2543:2009 (Foreign Standard)
DIN EN 2542:2009
Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Bar and Wire - D<(Index)e> 40 mm - For prevailing torque nuts; German and English version EN 2542:2008 (Foreign Standard)
DIN EN 2540:1998
Aerospace series - Steel FE-PM3902 (X7CrNiAl17-7) air melted, solution treated and precipitation hardened - Sheet and strip, a 6 mm, 1240 MPa R<(Index)m> 1450 MPa (FOREIGN STANDARD)
DIN EN 2536:1995
Aerospace series - Hard anodizing of aluminium alloys (FOREIGN STANDARD)
DIN EN 2535:1994
Aerospace series - Vacuum deposition of cadmium (FOREIGN STANDARD)
DIN EN 2516:1997
Aerospace series - Passivation of corrosion resistant steels and decontamination of nickel base alloys (FOREIGN STANDARD)
DIN EN 2512:2000
Aerospace series - Aluminium alloy AL-P7175-T7351 - Plate, 6 mm a 100 mm (FOREIGN STANDARD)
DIN EN 2511:2006
Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate - 6 mm a 100 mm; German and English version EN 2511:2005 (FOREIGN STANDARD)
DIN EN 2500-5:1996
Aerospace series - Instructions for the drafting and use of metallic material standards - Part 5: Specific requirements for steel; Inactive for new design (FOREIGN STANDARD)
DIN EN 2500-4:1996
Aerospace series - Instructions for the drafting and use of metallic material standards - Part 4: Specific requirements for titanium and titanium alloys; inactive for new design (FOREIGN STANDARD)
DIN EN 2500-3:1996
Aerospace series - Instructions for the drafting and use of metallic material standards - Part 3: Specific requirements for heat resisting alloys; Inactive for new design (FOREIGN STANDARD)
DIN EN 2500-2:1996
Aerospace series - Instructions for the drafting and use of metallic material standards - Part 2: Specific requirements for aluminium, aluminium alloys and magnesium alloys; inactive for new design (FOREIGN STANDARD)
DIN EN 2491:1997
Aerospace series - Molybdenum disulphide dry lubricants - Coating methods (FOREIGN STANDARD)
DIN EN 2489:1995
Aerospace series - Fibre reinforced plastics - Determination of the action of test fluids (FOREIGN STANDARD)
DIN EN 2486:2006
Aerospace series - Aluminium alloy AL-P2618A - Forging stock; German and English version EN 2486:2005 (FOREIGN STANDARD)
DIN EN 2485:1998
Aerospace series - Aluminium alloy AL-P2214 - Forging stock (FOREIGN STANDARD)
DIN EN 2480:2009
Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 250 MPa R<(Index)m> 1400 MPa - Bars - D<(Index)e> 75 mm; German and English version EN 2480:2008 (Foreign Standard)
DIN EN 2478:2009
Aerospace series - Steel FE-PL2107 (30NiCrMo16) - 1220 MPa R<(Index)m> 1370 MPa - Bars - D<(Index)e> 40 mm; German and English version EN 2478:2008 (Foreign Standard)
DIN EN 2475:1999
Aerospace series - Steel FE-PL2106 (30CrNiMo8), air melted, hardened and tempered - Bar for machining D<(Index)e> 100 mm, 1100 MPa R<(Index)m> 1300 MPa (FOREIGN STANDARD)
DIN EN 2469:2007
Aerospace series - Steel FE-PA3901 (X1CrNi18-10) - Air melted - Softened - Wires - 0,4 mm D 12,5 mm - 450 MPa R<(Index)m> 650 MPa; German and English version EN 2469:2007 (FOREIGN STANDARD)
DIN EN 2467:2008
Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Air melted - Softened - Plate, sheet and strip - 0,4 mm a 20 mm - 520 MPa R<(Index)m> 670 MPa; German and English version EN 2467:2007 (Foreign Standard)
DIN EN 2466:2009
Aerospace series - Steel FE-PA3901 (X2CrNi19-11) - Softened - Forgings - D<(Index)e> 100 mm; English version prEN 2466:2008 (Foreign Standard)
DIN EN 2465:2008
Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Softened - 450 MPa R<(Index)m> 680 MPa - Bar for machining - 4 mm D<(Index)e> 100 mm; German and English version EN 2465:2007 (FOREIGN STANDARD)
DIN EN 2461:2009
Aerospace series - Steel FE-PM1901 (X12Cr13) - 600 MPa R<(Index)m> 800 MPa - Forgings - D<(Index)e> 70 mm; English version prEN 2461:2008 (Foreign Standard)
DIN EN 2460:2009
Aerospace series - Steel FE-PM1901 (X12Cr13) - 600 MPa R<(Index)m> 800 MPa - Bars - D<(Index)e> 70 mm; English version prEN 2460:2008 (Foreign Standard)
DIN EN 2448:2009
Aerospace series - Steel FE-PL1503 (35CrMo4) - 900 MPa R<(Index)m> 1100 MPa - Bars - D<(Index)e> 40 mm; German and English version EN 2448:2008 (Foreign Standard)
DIN EN 2446:2009
Aerospace series - Steel FE-PL1503 (35CrMo4) - 1100 MPa R<(Index)m> 1300 MPa - Bars - D<(Index)e> 25 mm; German and English version EN 2446:2008 (Foreign Standard)
DIN EN 2445:1999
Aerospace series - Steel FE-PL8201 (41NiCrMo2), air melted, hardened and tempered - Hand and die forgings D<(Index)e> 45 mm, 900 MPa R<(Index)m> 1100 MPa (FOREIGN STANDARD)
DIN EN 2439:2009
Aerospace series - Steel FE-PL2102 (34NiCr6) - 900 MPa R<(Index)m> 1100 MPa - Forgings - D<(Index)e> 40 mm; English version prEN 2439:2008 (Foreign Standard)
DIN EN 2438:2009
Aerospace series - Steel FE-PL2102 (35NiCr6) - 900 MPa R<(Index)m> 1100 MPa - Bars - D<(Index)e> 40 mm; German and English version EN 2438:2008 (Foreign Standard)
DIN EN 2436-006:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application; German and English version EN 2436-006:2006 (FOREIGN STANDARD)
DIN EN 2436-005:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 005: For exterior use with surface preparation tolerance; German and English version EN 2436-005:2006 (FOREIGN STANDARD)
DIN EN 2436-004:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 004: High corrosion and fluid resistance with surface preparation tolerance; German and English version EN 2436-004:2006 (FOREIGN STANDARD)
DIN EN 2436-003:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 003: High corrosion and fluid resistance; German and English version EN 2436-003:2006 (FOREIGN STANDARD)
DIN EN 2436-002:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 002: High corrosion resistance; German and English version EN 2436-002:2006 (FOREIGN STANDARD)
DIN EN 2436-001:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 001: Basic requirements; German and English version EN 2436-001:2006 (FOREIGN STANDARD)
DIN EN 2435-005:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application; German and English version EN 2435-005:2006 (FOREIGN STANDARD)
DIN EN 2435-004:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 004: High corrosion and fluid resistance with surface preparation tolerance; German and English version EN 2435-004:2006 (FOREIGN STANDARD)
DIN EN 2435-003:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 003: High corrosion and fluid resistance; German and English version EN 2435-003:2006 (FOREIGN STANDARD)
DIN EN 2435-002:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 002: High corrosion resistance; German and English version EN 2435-002:2006 (FOREIGN STANDARD)
DIN EN 2435-001:2007
Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 001: Minimum requirements; German and English version EN 2435-001:2006 (FOREIGN STANDARD)
DIN EN 2434-005:2007
Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 005: High flexibility and chemical agent resistance for military application; German and English version EN 2434-005:2006 (FOREIGN STANDARD)
DIN EN 2432:1995
Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 90 IRHD (FOREIGN STANDARD)
DIN EN 2431:1995
Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 80 IRHD (FOREIGN STANDARD)
DIN EN 2430:1995
Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 70 IRHD (FOREIGN STANDARD)
DIN EN 2429:1995
Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 60 IRHD (FOREIGN STANDARD)
DIN EN 2428:1995
Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 50 IRHD (FOREIGN STANDARD)
DIN EN 2424:2008
Aerospace series - Marking of aerospace products; German and English version prEN 2424:2007 (Foreign Standard)
DIN EN 2422:2006
Aerospace series - Aluminium alloy AL-P2124-T351 - Plate - 25 mm a 120 mm; German and English version EN 2422:2005 (FOREIGN STANDARD)
DIN EN 2419:2000
Aerospace series - Aluminium alloy AL-P2024-T351 - Plate, 6 mm a 80 mm (FOREIGN STANDARD)
DIN EN 2413:1995
Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 2407:1999
Aerospace series - Heat resisting alloy NI-PH2601 (NiCr19Fe19Nb5Mo3), solution treated and precipitation treated - Sheet, strip and plate, 0,2 mm a 10 mm (FOREIGN STANDARD)
DIN EN 2405:1999
Aerospace series - Heat resisting alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) solution treated and precipitation treated - Hand and die forgings, D<(Index)e> 200 mm (FOREIGN STANDARD)
DIN EN 2403:1999
Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) vacuum melted, solution treated and precipitation treated - Precision casting, a or D 50 mm (FOREIGN STANDARD)
DIN EN 2399:2009
Aerospace series - Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15) - R<(Index)m> 900 MPa - Bars for forged bolts - D 25 mm; German and English version EN 2399:2008 (Foreign Standard)
DIN EN 2398:2009
Aerospace series - Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15) - R<(Index)m> 900 MPa - Bars for machined bolts - D 25 mm; German and English version EN 2398:2008 (Foreign Standard)
DIN EN 2395:2006
Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 0,4 mm a 6 mm; German and English version EN 2395:2005 (FOREIGN STANDARD)
DIN EN 2386:1998
Aerospace series - Aluminium alloy AL-P7075-T7352 - Hand forgings a 150 mm (FOREIGN STANDARD)
DIN EN 2385:1993
Aerospace series; aluminium alloy AL-P7009-T74511; extruded bars and sections a or D 125 mm (FOREIGN STANDARD)
DIN EN 2383:1998
Aerospace series - Aluminium alloy AL-P2214-T4 - Hand and die forgings a 100 mm (FOREIGN STANDARD)
DIN EN 2382:1998
Aerospace series - Aluminium alloy AL-P2214-T6 - Hand and die forgings a 100 mm (FOREIGN STANDARD)
DIN EN 2381:1993
Aerospace series; aluminium alloy AL-P7009-T7452; hand forgings 40 mm a 150 mm (FOREIGN STANDARD)
DIN EN 2379:1995
Aerospace series - Fluids for assessment of non-metallic materials (FOREIGN STANDARD)
DIN EN 2378:1995
Aerospace series - Fibre reinforced plastics - Determination of water absorption by immersion (FOREIGN STANDARD)
DIN EN 2349-601:2008
Aerospace series - Requirements and test procedures for relays and contactors - Part 601: Compass safety distance; German and English version EN 2349-601:2007 (FOREIGN STANDARD)
DIN EN 2349-415:2008
Aerospace series - Requirements and test procedures for relays and contactors - Part 415: Acceleration; German and English version EN 2349-415:2007 (FOREIGN STANDARD)
DIN EN 2349-413:2008
Aerospace series - Requirements and test procedures for relays and contactors - Part 413: Vibration, sinusoidal and random; German and English version EN 2349-413:2007 (FOREIGN STANDARD)
DIN EN 2349-412:2008
Aerospace series - Requirements and test procedures for relays and contactors - Part 412: Seal; German and English version EN 2349-412:2007 (FOREIGN STANDARD)
DIN EN 2349-411:2008
Aerospace series - Requirements and test procedures for relays and contactors - Part 411: Temperature change; German and English version EN 2349-411:2007 (FOREIGN STANDARD)
DIN EN 2349-410:2008
Aerospace series - Requirements and test procedures for relays and contactors - Part 410: Mould; German and English version EN 2349-410:2007 (FOREIGN STANDARD)
DIN EN 2349-409:2008
Aerospace series - Requirements and test procedures for relays and contactors - Part 409: Ozone resistance; German and English version EN 2349-409:2007 (FOREIGN STANDARD)
DIN EN 2349-407:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 407: Cold/low pressure and moist heat; German and English version EN 2349-407:2006 (FOREIGN STANDARD)
DIN EN 2349-405:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 405: Fluid resistance; German and English version EN 2349-405:2006 (FOREIGN STANDARD)
DIN EN 2349-402:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 402: Corrosion, salt spray; German and English version EN 2349-402:2006 (FOREIGN STANDARD)
DIN EN 2349-318:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature; German and English version EN 2349-318:2006 (FOREIGN STANDARD)
DIN EN 2349-317:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 317: Service life of coil switching device; German and English version EN 2349-317:2006 (FOREIGN STANDARD)
DIN EN 2349-316:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 316: Mechanical life (Endurance at reduced load); German and English version EN 2349-316:2006 (FOREIGN STANDARD)
DIN EN 2349-312:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 312: Electrical service life - Mixed load; German and English version EN 2349-312:2006 (FOREIGN STANDARD)
DIN EN 2349-310:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 310: Rupture; German and English version EN 2349-310:2006 (FOREIGN STANDARD)
DIN EN 2349-309:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 309: Exported spikes; German and English version EN 2349-309:2006 (FOREIGN STANDARD)
DIN EN 2349-308:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 308: Coil current; German and English version EN 2349-308:2006 (FOREIGN STANDARD)
DIN EN 2349-307:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop; German and English version EN 2349-307:2006 (FOREIGN STANDARD)
DIN EN 2349-306:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.; German and English version EN 2349-306:2006 (FOREIGN STANDARD)
DIN EN 2349-305:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 305: Bounce time; German and English version EN 2349-305:2006 (FOREIGN STANDARD)
DIN EN 2349-304:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time; German and English version EN 2349-304:2006 (FOREIGN STANDARD)
DIN EN 2349-303:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 303: Dielectric strength; German and English version EN 2349-303:2006 (FOREIGN STANDARD)
DIN EN 2349-302:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 302: Insulation resistance; German and English version EN 2349-302:2006 (FOREIGN STANDARD)
DIN EN 2349-301:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 301: Pick-up and drop-out voltage; German and English version EN 2349-301:2006 (FOREIGN STANDARD)
DIN EN 2349-202:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 202: Examination of dimensions and mass; German and English version EN 2349-202:2006 (FOREIGN STANDARD)
DIN EN 2349-201:2007
Aerospace series - Requirements and test procedures for relays and contactors - Part 201: Visual inspection; German and English version EN 2349-201:2006 (FOREIGN STANDARD)
DIN EN 2349:1995
Aerospace series - Requirements and test procedures for switching devices (FOREIGN STANDARD)
DIN EN 2346-004:2007
Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 ?C and 260 ?C - Part 004: DN family, single UV laser printable and multicore assembly - Light weight - Product standard; German (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2346-003:2007
Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 ?C and 260 ?C - Part 003: DL family, single core - Product standard; German and English version EN 2346-003:2006 (FOREIGN STANDARD)
DIN EN 2346-002:2007
Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 ?C and 260 ?C - Part 002: General; German and English version EN 2346-002:2006 (FOREIGN STANDARD)
DIN EN 2345-2:1999
Aerospace series - Rivets, solid, in aluminium and aluminium alloy, metric series - Technical specification (FOREIGN STANDARD)
Aerospace series - Electrical contacts used in elements of connection - Part 055: Contacts, electrical, female, thermocouple NiAl, type C, crimp, class T - Product standard; German and English version EN 3155-055:2006 (FOREIGN STANDARD)
DIN EN 3155-055:2007
Aerospace series - Electrical contacts used in elements of connection - Part 054: Contacts, electrical, male, thermocouple NiAl, type C, crimp, class T - Product standard; German and English version EN 3155-054:2006 (FOREIGN STANDARD)
DIN EN 3155-054:2007
Aerospace series - Electrical contacts used in elements of connection - Part 045: Contacts, electrical, female, type A, double crimping, class T - Product standard; German and English version EN 3155-045:2006 (FOREIGN STANDARD)
DIN EN 3155-045:2007
Aerospace series - Electrical contacts used in elements of connection - Part 044: Contacts, electrical, male 044, type A, double crimping, class T - Product standard; German and English version EN 3155-044:2007 (Foreign Standard)
DIN EN 3155-044:2008
Aerospace series - Electrical contacts used in elements of connection - Part 043: Contacts, electrical, triaxial, size 08, female 043, type D, solder, class P - Product standard; German and English version EN 3155-043:2006 (FOREIGN STANDARD)
DIN EN 3155-043:2006
Aerospace series - Electrical contacts used in elements of connection - Part 042: Contacts, electrical, triaxial, size 08, male 042, type D, solder, class P - Product standard; German and English version EN 3155-042:2006 (FOREIGN STANDARD)
DIN EN 3155-042:2006
Aerospace series - Electrical contacts used in elements of connection - Part 041: Contacts, electrical, coaxial, size 12, female, type D, solder, class R - Product standard; German and English version EN 3155-041:2007 (Foreign Standard)
DIN EN 3155-041:2008
Aerospace series - Electrical contacts used in elements of connection - Part 040: Contacts, electrical, coaxial, size 12, male, type D, solder, class R - Product standard; German and English version EN 3155-040:2007 (Foreign Standard)
DIN EN 3155-040:2008
Aerospace series - Electrical contacts used in elements of connection - Part 039: Contacts, electrical, coaxial, size 16, female, type D, solder, class R - Product standard; German and English version EN 3155-039:2007 (Foreign Standard)
DIN EN 3155-039:2008
Aerospace series - Electrical contacts used in elements of connection - Part 035: Contacts, electrical, triaxial, size 08, female, type D, crimp, class R - Product standard; German and English version EN 3155-035:2006 (Foreign Standard)
DIN EN 3155-035:2008
Aerospace series - Electrical contacts used in elements of connection - Part 033: Contacts, electrical, coaxial, 50 ohms, size 5, female, type D, crimp, class R - Product standard; German and English version EN 3155-033:2009 (Foreign Standard)
DIN EN 3155-033:2009
Aerospace series - Electrical contacts used in elements of connection - Part 032: Contacts, electrical, coaxial, 50 ohms, size 5, male, type D, crimp, class R - Product standard; German and English version EN 3155-032:2009 (Foreign Standard)
DIN EN 3155-032:2009
Aerospace series - Electrical contacts used in elements of connection - Part 031: Contacts, electrical, coaxial, shielded, size 12, female, type D, crimp, class R - Product standard; German and English version EN 3155-031:2006 (FOREIGN STANDARD)
DIN EN 3155-031:2007
Aerospace series - Electrical contacts used in elements of connection - Part 030: Contacts, electrical, coaxial, shielded, size 12, male, type D, crimp, class R - Product standard; German and English version EN 3155-030:2006 (FOREIGN STANDARD)
DIN EN 3155-030:2007
Aerospace series - Electrical contacts used in elements of connection - Part 029: Contacts, electrical, coaxial, shielded, size 16, female, type D, crimp, class R - Product standard; German and English version EN 3155-029:2007 (Foreign Standard)
DIN EN 3155-029:2008
Aerospace series - Electrical contacts used in elements of connection - Part 028: Contacts, electrical, coaxial, shielded, size 16, male, type D, crimp, class R - Product standard; German and English version EN 3155-028:2006 (FOREIGN STANDARD)
DIN EN 3155-028:2007
Aerospace series - Electrical contacts used in elements of connection - Part 027: Contacts, electrical, female, type A, crimp, class R - Product standard; German and English version EN 3155-027:2006 (FOREIGN STANDARD)
DIN EN 3155-027:2006
Aerospace series - Electrical contacts used in elements of connection - Part 026: Contacts, electrical, male, type A, crimp, class R - Product standard; German and English version EN 3155-026:2006 (FOREIGN STANDARD)
DIN EN 3155-026:2006
Aerospace series - Electrical contacts used in elements of connection - Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class S - Product standard; German and English version EN 3155-025:2006 (FOREIGN STANDARD)
DIN EN 3155-025:2007
Aerospace series - Electrical contacts used in elements of connection - Part 024: Contacts, electrical, triaxial, size 8, male, type D, crimp, class S - Product standard; German and English version EN 3155-024:2006 (FOREIGN STANDARD)
DIN EN 3155-024:2007
Aerospace series - Electrical contacts used in elements of connection - Part 023: Contacts, electrical rectangular, female, type A, crimp, class R - Product standard; German and English version EN 3155-023:2006 (FOREIGN STANDARD)
DIN EN 3155-023:2006
Aerospace series - Electrical contacts used in elements of connection - Part 022: Contacts, electrical rectangular, male, type A, crimp, class R - Product standard; German and English version EN 3155-022:2006 (FOREIGN STANDARD)
DIN EN 3155-022:2007
Aerospace series - Electrical contacts used in elements of connection - Part 019: Contacts, electrical, female, type A, crimp, class S - Product standard; German and English version EN 3155-019:2005 (FOREIGN STANDARD)
DIN EN 3155-019:2006
Aerospace series - Electrical contacts used in elements of connection - Part 018: Contacts, electrical, male, type A, crimp, class S - Product standard; German and English version EN 3155-018:2005 (FOREIGN STANDARD)
DIN EN 3155-018:2006
Aerospace series - Electrical contacts used in elements of connection - Part 017: Contacts, electrical, relay base, female, type A, crimp, class P - Product standard; German and English version EN 3155-017:2006 (FOREIGN STANDARD)
DIN EN 3155-017:2007
Aerospace series - Electrical contacts used in elements of connection - Part 016: Contacts, electrical, male, type A, crimp, class S - Product standard; German and English version EN 3155-016:2006 (FOREIGN STANDARD)
DIN EN 3155-016:2007
Aerospace series - Electrical contacts used in elements of connection - Part 015: Contacts, electrical, female, type A, crimp, class S - Product standard; German and English version EN 3155-015:2006 (FOREIGN STANDARD)
DIN EN 3155-015:2007
Aerospace series - Electrical contacts used in elements of connection - Part 014: Contacts, electrical, male, type A, crimp, class S - Product standard; German and English version EN 3155-014:2006 (FOREIGN STANDARD)
DIN EN 3155-014:2007
Aerospace series - Electrical contacts used in elements of connection - Part 013: Contacts, electrical, triaxial, size 8, female, type D, solder, class R - Product standard; German and English version EN 3155-013:2006 (FOREIGN STANDARD)
DIN EN 3155-013:2007
Aerospace series - Electrical contacts used in elements of connection - Part 012: Contacts, electrical, triaxial, size 8, male, type D, solder, class R - Product standard; German and English version EN 3155-012:2006 (FOREIGN STANDARD)
DIN EN 3155-012:2007
Aerospace series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard; German and English version EN 3155-009:2009 (Foreign Standard)
DIN EN 3155-009:2009
Aerospace series - Electrical contacts used in elements of connection - Part 008: Contacts, electrical, male, type A, crimp, class S - Product standard; German and English version EN 3155-008:2005 (FOREIGN STANDARD)
DIN EN 3155-008:2006
Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard; German and English version EN 3155-005:2006, Corrigenda to DIN (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3155-005 Berichtigung 1:2007
Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard; German and English version EN 3155-005:2006 (FOREIGN STANDARD)
DIN EN 3155-005:2006
Aerospace series - Electrical contacts used in elements of connection - Part 003: Contacts, electrical, female, type A, crimp, class S - Product standard; German and English version EN 3155-003:2005 (FOREIGN STANDARD)
DIN EN 3155-003:2006
Aerospace series - Electrical contacts used in elements of connection - Part 002: List and utilization of contacts; German and English version EN 3155-002:2006 (FOREIGN STANDARD)
DIN EN 3155-002:2007
Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical specification (FOREIGN STANDARD)
DIN EN 3155-001:2000
Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated or uncoated - Classification: 1100 MPa (at ambient temperature)/425 oC - Technical specification; German and En (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3152:2005
Aerospace series - Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718) (FOREIGN STANDARD)
DIN EN 3151:1995
Aerospace series - Pins, shoulder, headless, in heat resisting nickel base alloy NI-P100HT (Inconel 718) (FOREIGN STANDARD)
DIN EN 3150:1995
Aerospace series - Shank nuts - Installation holes, 60? swage, flanges - Design standard (FOREIGN STANDARD)
DIN EN 3149:1996
Aerospace series - Round bars, hot rolled in steel - Normal tolerances; Diameter 6 mm D 250 mm; Dimensions; German and English version EN 3145:2001 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3145:2003
Aerospace series - Rivets, solid, 100? countersunk normal head, in nickel base alloy NI-P11; inch based series (FOREIGN STANDARD)
DIN EN 3144:1995
Aerospace series - Rivets, solid, 100? countersunk normal head, in nickel base alloy NI-P11, cadmium plated; inch based series (FOREIGN STANDARD)
DIN EN 3143:1995
Aerospace series - Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, inch based series (FOREIGN STANDARD)
DIN EN 3142:1996
Aerospace series - Rivets, solid, universal head, in head resisting nickel base alloy NI-P11, cadmium plated, inch based series (FOREIGN STANDARD)
DIN EN 3141:1996
Aerospace series - Rivets, solid, 100? countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series (FOREIGN STANDARD)
DIN EN 3140:2001
Aerospace series - Rivets, solid, 100? countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series (FOREIGN STANDARD)
DIN EN 3139:2001
Aerospace series - Rivets, solid, 100? countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series (FOREIGN STANDARD)
DIN EN 3138:2001
Aerospace series; rivets, solid, 100? normal countersunk head with dome, in corrosion resisting steel FE-PA11, passivated (FOREIGN STANDARD)
DIN EN 3137:1992
Aerospace series - Rivets, solid, universal head, in corrosion resisting steel FE-PA11, passivated, inch based series (FOREIGN STANDARD)
DIN EN 3135:1996
Aerospace series - Titanium alloy TI-P64003, cold worked and stress relieved - Seamless tube for pressure systems 4 mm D 51 mm, 690 MPa R<(Index)m> 1030 MPa (FOREIGN STANDARD)
DIN EN 3120:1996
Aerospace series - Titanium alloy TI-P46001 - Not heat treated, grade 2 forging stock for solution treated and aged forgings a or D 360 mm (FOREIGN STANDARD)
DIN EN 3119:1996
Aerospace series - Aluminium alloy 7050-T73 - Wire for solid rivets - D 10 mm; German and English version EN 3115:2009 (Foreign Standard)
DIN EN 3115:2009
Aerospace series - Test method - Microstructure of ( + á) titanium alloy wrought products - Part 004: Microstructure of sheet for superplastic forming; German and English version EN 3114-004:2006 (FOREIGN STANDARD)
DIN EN 3114-004:2007
Aerospace series - Test method - Microstructure of ( + á) titanium alloy wrought products - Part 003: Microstructure of plate; German and English version EN 3114-003:2006 (FOREIGN STANDARD)
DIN EN 3114-003:2007
Aerospace series - Test method - Microstructure of ( + ) titanium alloy wrought products - Part 002: Microstructure of bars, sections, forging stock and forgings; German and English version EN 3114-002:2007 (FOREIGN STANDARD)
DIN EN 3114-002:2007
Aerospace series - Test method - Microstructure of ( + á) titanium alloy wrought products - Part 001: General requirements; German and English version EN 3114-001:2006 (FOREIGN STANDARD)
DIN EN 3114-001:2007
Aerospace series - Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 3112:1995
Aerospace series - Sealants - Test methods; Determination of low-temperature flexibility (FOREIGN STANDARD)
DIN EN 3102:2000
Aerospace series - Non-metallic materials - Sealants; test methods; determination of resistance to thermal rupture (FOREIGN STANDARD)
DIN EN 3101:1997
Aerospace series - Sealants - Test method; determination of tack-free time (FOREIGN STANDARD)
DIN EN 3096:1996
Aerospace series - Sealants - Test method - Determination of extended assembly time (FOREIGN STANDARD)
DIN EN 3095:1999
Aerospace series - Sealants - Test method; determination of application time (FOREIGN STANDARD)
DIN EN 3094:1996
Aerospace series - hose assemblies - Designation limited to 15 digits (FOREIGN STANDARD)
DIN EN 3086:1999
Aerospace series - Pipe coupling 8?30 in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair; German version EN 3081:2001 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3081:2002
Aerospace series - Pipe coupling 8?30' in titanium alloy - Tees, reduced, branch with thrust wire nut; German and English version EN 3080:2006 (FOREIGN STANDARD)
DIN EN 3080:2007
Aerospace series - Pipe coupling 8?30' up to 28000 kPa - Adaptors - Metric series - Technical specification; German and English version EN 3079:2006 (FOREIGN STANDARD)
DIN EN 3079:2007
Aerospace series - P, Q and saddle clamps with rubber cushion - Technical specification (FOREIGN STANDARD)
DIN EN 3078:1999
Aerospace series - Clamps worm drive - Technical specification (FOREIGN STANDARD)
DIN EN 3077:1999
Aerospace series - Straight bending of sheets and strips in aluminium and aluminium alloys - Dimensioning methods and calculations of developed lengths (FOREIGN STANDARD)
DIN EN 3071:1997
Aerospace series - Installation holes for self-locking, serrated shank nuts; design Standard (FOREIGN STANDARD)
DIN EN 3065:1996
Aerospace series - Shank nuts, self-locking, serrated - Installation procedure (FOREIGN STANDARD)
DIN EN 3064:1996
Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 ?C (FOREIGN STANDARD)
DIN EN 3063:1994
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel, with flanged alignment housing - Dimensions and loads; German and English version EN 3061:2007 (FOREIGN STANDARD)
DIN EN 3061:2008
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated, with flanged alignment housing, cadmium plated - Dimensions and loads; German and English version EN 3060:2007 (FOREIGN STANDARD)
DIN EN 3060:2008
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel with flanged alignment housing, cadmium plated - Dimensions and loads; German and English version EN 3059:2007 (FOREIGN STANDARD)
DIN EN 3059:2008
Aerospace series; bearings, airframe rolling; rigid double row ball bearings in corrosion resisting steel; dimensions and loads (FOREIGN STANDARD)
DIN EN 3058:1994
Aerospace series; bearings, airframe rolling, rigid double row ball bearings in steel, cadmium plated; dimensions and loads (FOREIGN STANDARD)
DIN EN 3057:1994
Aerospace series; bearings, airframe rolling, rigid double row ball bearings in steel; dimensions and loads (FOREIGN STANDARD)
DIN EN 3056:1994
Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in corrosion resisting steel; dimensions and loads (FOREIGN STANDARD)
DIN EN 3055:1994
Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in steel, cadmium plated; dimensions and loads (FOREIGN STANDARD)
DIN EN 3054:1994
Aerospace series; bearings; airframe rolling, single row self-aligning roller bearings in steel; dimensions and loads (FOREIGN STANDARD)
DIN EN 3053:1994
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3052:1999
Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification (FOREIGN STANDARD)
DIN EN 3050:1998
Aerospace series - O-rings, in fluorocarbon rubber (FKM) low compression set - Hardness 80 IRHD (FOREIGN STANDARD)
DIN EN 3049:1998
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 3048:2001 (FOREIGN STANDARD)
DIN EN 3048:2006
Aerospace series; bearings, airframe rolling; rigid single row ball bearings in corrosion resisting steel; diameter series 0 and 2; reduced clearance category; dimensions and loads (FOREIGN STANDARD)
DIN EN 3047:1994
Aerospace series; bearings, airframe rolling; rigid single row ball bearings in steel, cadmium plated; diameter series 0 and 2; reduced clearance category; dimensions and loads (FOREIGN STANDARD)
DIN EN 3046:1994
Aerospace series; bearings, airframe rolling; rigid single row ball bearings in steel; diameter series 0 and 2; reduced clearance category; dimensions and loads (FOREIGN STANDARD)
DIN EN 3045:1994
Aerospance series - Installation holes for inserts, screw thread, helical coil, self-locking - Design standard (FOREIGN STANDARD)
DIN EN 3044:1998
Aerospace series - Fasteners, externally threaded, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa/650 ?C, manufacturing method optional - Technical specification; German and English version EN 3043:2008 (Foreign Standard)
DIN EN 3043:2008
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3038:1996
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized MoS<(Index)2> lubricated - Classification: 1100 MPa(at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3037:1996
Aerospace series - 100? countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa(at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN Standards : DIN ICS 49 Aircraft and Space Vehicle Engineering (Page 2)
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
