BIS Standards Catalogue

BS EN 1890:1999 BS EN 1890:1999. Surface active agents. Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
BS EN 12139:1999 BS EN 12139:1999. Surface active agents. Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC
BS EN 12458:1999 BS EN 12458:1999. Surface active agents. Determination of stability in hard water
BS EN 12582:1999 BS EN 12582:1999. Surface active agents. Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
BS EN 12690:1999 BS EN 12690:1999. Biotechnology. Performance criteria for shaft seals
BS EN 12884:1999 BS EN 12884:1999. Biotechnology. Performance criteria for centrifuges
BS EN 12885:1999 BS EN 12885:1999. Biotechnology. Performance criteria for cell disrupters
BS EN 288-9:1999 BS EN 288-9:1999. Specification and approval of welding procedures for metallic materials. Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines
BS EN 12584:1999 BS EN 12584:1999. Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts. Terminology
BS EN 10160:1999 BS EN 10160:1999. Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
BS EN 1034-3:2000 BS EN 1034-3:2000. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Winders and slitters, plying machines
BS EN 61249-2-13:1999, IEC 61249-2-13:1999 BS EN 61249-2-13:1999, IEC 61249-2-13:1999. Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Cyanate ester non-woven aramid laminate of defined flammability, copper-clad. Cyanate ester non-woven aramid laminate of defined flammability copper-clad
BS EN ISO 8785:1999 BS EN ISO 8785:1999. Geometrical product specification (GPS). Surface imperfections. Terms, definitions and parameters
PD 6640:1999 PD 6640:1999. Recommendations for short term solutions to support a sevice provider access interface
BS EN 932-5:2000 BS EN 932-5:2000. Tests for general properties of aggregates. Common equipment and calibration
BS EN 932-6:1999 BS EN 932-6:1999. Tests for general properties of aggregates. Definitions of repeatability and reproducibility
BS EN 1367-1:2000 BS EN 1367-1:2000. Tests for thermal and weathering properties of aggregates. Determination of resistance to freezing and thawing
BS EN 10095:1999 BS EN 10095:1999. Heat resisting steels and nickel alloys
BS EN 12588:1999 BS EN 12588:1999. Lead and lead alloys. Rolled lead sheet for building purposes
BS EN ISO 5457:1999 BS EN ISO 5457:1999. Technical product documentation. Sizes and layout of drawing sheets
BS EN 12079:1999 BS EN 12079:1999. Offshore containers. Design, construction, testing, inspection and marking
BS EN 12798:1999 BS EN 12798:1999. Transport quality system. Road, rail and inland navigation transport. Quality system requirements to supplement BS EN ISO 9002 for the transport of dangerous goods with regard to safety
BS EN 12007-1:2000 BS EN 12007-1:2000. Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar. General functional recommendations
BS EN 12007-2:2000 BS EN 12007-2:2000. Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional recommendations for polyethylene (MOP up to and including 10 bar)
BS EN 12007-3:2000 BS EN 12007-3:2000. Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional recommendations for steel
BS EN 12007-4:2000 BS EN 12007-4:2000. Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional recommendations for renovation
BS EN ISO 8044:2000 BS EN ISO 8044:2000. Corrosion of metals and alloys. Basic terms and definitions
BS EN ISO 13628-4:1999 BS EN ISO 13628-4:1999. Petroleum and natural gas industries. Design and operation of subsea production systems. Subsea wellhead and tree equipment
BS EN 1559-4:1999 BS EN 1559-4:1999. Founding. Technical conditions of delivery. Additional requirements for aluminium alloy castings
BS EN 60368-2-2:1999, IEC 60368-2-2:1996 BS EN 60368-2-2:1999, IEC 60368-2-2:1996. Piezoelectric filters. Guide to the use of piezoelectric filters. Piezoelectric ceramic filters. Section 2: Piezoelectric ceramic filters
BS EN ISO 13628-1:1999 BS EN ISO 13628-1:1999. Petroleum and natural gas industries. Design and operation of subsea production systems. General requirements and recommendations
BS EN 61609:1999, IEC 61609:1996 BS EN 61609:1999, IEC 61609:1996. Microwave ferrite components. Guide for the drafting of specifications
PD 6579:1999, CR 1749:1998 PD 6579:1999, CR 1749:1998. European scheme for the classification of gas appliances according to the method of evacuation of the products of combustion (types)
BS EN ISO 14114:1999 BS EN ISO 14114:1999. Gas welding equipment. Acetylene manifold systems for welding, cutting and allied processes. General requirements
DC99/707736 DC99/707736. Draft British Standard, BS ISO 15170-2, Road vehicles - Electrical connectors - Four poles with pins, and twist-lock. Part 2: Tests and performance requirements
BS EN ISO 14253-1:1999 BS EN ISO 14253-1:1999. Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Decision rules for proving conformance or non-conformance with specifications
DD ENV 1907:1999 DD ENV 1907:1999. Safety requirements for passenger transportation by rope. Terminology
BS EN ISO 5458:1999 BS EN ISO 5458:1999. Geometrical product specifications (GPS). Geometrical tolerancing. Positional tolerancing
BS EN 455-3:2000 BS EN 455-3:2000. Medical gloves for single use. Requirements and testing for biological evaluation
DC99/710503 DC99/710503. Draft British Standard, ISO 11748-1, Road vehicles - Technical documentation of electrical and electronic, systems. Part 1: Content of exchanged documents
BS EN 1651:1999 BS EN 1651:1999. Paragliding equipment. Harnesses. Safety requirements and strength tests
BS ISO 3183-3:1999 BS ISO 3183-3:1999. Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions. Pipes of requirement class C
BS EN 1626:1999 BS EN 1626:1999. Cryogenic vessels. Valves for cryogenic service
BS EN ISO 13702:1999 BS EN ISO 13702:1999. Petroleum and natural gas industries. Control and mitigation of fires and explosions on offshore production installations. Requirements and guidelines
BS EN 12475-4:1999 BS EN 12475-4:1999. Classification of dense shaped refractory products. Special products
BS EN ISO 252-1:1999 BS EN ISO 252-1:1999. Textile conveyor belts. Adhesive strength between constitutive elements. Methods of test
BS EN 1821-2:1999 BS EN 1821-2:1999. Electrically propelled road vehicles. Measurement of road operating ability. Thermal electric hybrid vehicles
BS EN 12625-5:1999 BS EN 12625-5:1999. Tissue paper and tissue products. Determination of wet tensile strength
BS EN 12625-4:1999 BS EN 12625-4:1999. Tissue paper and tissue products. Determination of tensile strength, stretch at break and tensile energy absorption
BS EN 12625-3:1999 BS EN 12625-3:1999. Tissue paper and tissue products. Determination of thickness, bulking thickness and apparent bulk density
BS EN 12625-6:1999 BS EN 12625-6:1999. Tissue paper and tissue products. Determination of grammage
BS EN 60044-6:1999, IEC 60044-6:1992 BS EN 60044-6:1999, IEC 60044-6:1992. Instrument transformers. Requirements for protective current transformers for transient performance
BS EN 1539:2000 BS EN 1539:2000. Dryers and ovens in which flammable substances are released. Safety requirements
BS EN 60966-1:1999, IEC 60966-1:1999,QC 140000:1999 BS EN 60966-1:1999, IEC 60966-1:1999,QC 140000:1999. Radio frequency and coaxial cable assemblies. Generic specification. General requirements and test methods
DC99/201800 DC99/201800. Draft British Standard, BS IEC 60127-4-A2F2, Miniature fuses. Universal modular fuse-links (UMF)
DC99/654246 DC99/654246. Draft British Standard, BS ISO/IEC 14496-1-A1, Information technology - Generic coding of moving pictures and associated, audio information. Part 1: Systems. AMD 1: Systems extensions
BS EN 60051-1:1999, IEC 60051-1:1997 BS EN 60051-1:1999, IEC 60051-1:1997. Direct acting indicating analogue electrical measuring instruments and their accessories. Definitions and general requirements common to all parts
DD ENV 926-2:1999 DD ENV 926-2:1999. Paragliding equipment. Paragliders. Requirements and flight tests
DC99/708381 DC99/708381. Draft British Standard BS EN ISO 5199 Technical specification for centrifugal pumps - Class II.
BS 7755-4.2.3:1999, ISO 11268-3:1999 BS 7755-4.2.3:1999, ISO 11268-3:1999. Soil quality. Biological methods. Effects of pollutants on soil fauna. Effects of pollutants on earthworms. Guidance on the determination of effects in field situations
BS EN 13089:1999 BS EN 13089:1999. Mountaineering equipment. Ice tools. Safety requirements and test methods
BS EN 13002-2:1999 BS EN 13002-2:1999. Carbon fibre yarns. Test methods and general specifications
BS EN ISO 13934-1:1999 BS EN ISO 13934-1:1999. Textiles. Tensile properties of fabrics. Determination of maximum force and elongation at maximum force using the strip method
BS EN ISO 13934-2:1999 BS EN ISO 13934-2:1999. Textiles. Tensile properties of fabrics. Determination of maximum force using the grab method
BS EN ISO 13935-1:1999 BS EN ISO 13935-1:1999. Textiles. Seam tensile properties of fabrics and made-up textile articles. Determination of maximum force to seam rupture using the strip method
BS EN ISO 13935-2:1999 BS EN ISO 13935-2:1999. Textiles. Seam tensile properties of fabrics and made-up textile articles. Determination of maximum force to seam rupture using the grab method
BS EN 13003-1:1999 BS EN 13003-1:1999. Para-aramid fibre filament yarns. Designation
BS EN 12751:1999 BS EN 12751:1999. Textiles. Sampling of fibres, yarns and fabrics for testing
BS EN 13003-2:1999 BS EN 13003-2:1999. Para-aramid fibre filament yarns. Methods of test and general specifications
BS EN 13003-3:1999 BS EN 13003-3:1999. Para-aramid fibre filament yarns. Technical specifications
BS EN ISO 12866:1999 BS EN ISO 12866:1999. Ophthalmic instruments. Perimeters
BS EN 45510-4-1:1999 BS EN 45510-4-1:1999. Guide for the procurement of power station equipment. Boiler auxiliaries. Equipment for reduction of dust emissions. Equipment for the reduction of dust emissions
BS EN 45510-4-2:1999 BS EN 45510-4-2:1999. Guide for the procurement of power station equipment. Boiler auxiliaries. Gas-air, steam-air and gas-gas heaters. Gas-air,steam-air and gas-gas heaters
BS EN 45510-4-3:1999 BS EN 45510-4-3:1999. Guide for the procurement of power station equipment. Boiler auxiliaries. Draught plant. Draught plant
BS EN 45510-4-7:1999 BS EN 45510-4-7:1999. Guide for the procurement of power station equipment. Boiler auxiliaries. Ash handling plant. Ash handling plant
BS EN 60059:1999, IEC 60059:1999 BS EN 60059:1999, IEC 60059:1999. IEC standard current ratings
WD/ISO/IEC9594-2 : 1998 EDTN.3 WD/ISO/IEC9594-2 : 1998 EDTN.3. ISO/IEC 9594-2-A2 Information technology - Open Systems Interconnection - The Directory. Models
WD/ISO/IEC9594-1 : 1998 EDTN 3 WD/ISO/IEC9594-1 : 1998 EDTN 3. ISO/IEC 9594-1-A3 Information technology - Open Systems Interconnection - The Directory. Overview of concepts, models and services. Enhancements for support of ITU-T Rec F.510
BS 6068-5.24:1999, ISO 14669:1999 BS 6068-5.24:1999, ISO 14669:1999. Water quality. Biological methods. Determination of acute lethal toxicity to marine copepods (Copepoda, Crustacea)
BS EN 12061:1999, BS 2782-11:Method 1108D:1999 BS EN 12061:1999, BS 2782-11:Method 1108D:1999. Plastics piping systems. Thermoplastics fittings. Test method for impact resistance
BS EN ISO 3735:1999, BS 2000-53:1999 BS EN ISO 3735:1999, BS 2000-53:1999. Crude petroleum and fuel oils. Determination of sediment. Extraction method
BS ISO 18919:1999 BS ISO 18919:1999. Photography. Thermally processed silver microfilm. Specifications for stability
BS ISO 516:1999 BS ISO 516:1999. Photography. Camera shutters. Timing
BS ISO 11315-3:1999 BS ISO 11315-3:1999. Photography. Projection in indoor rooms. Classification of transmitting projection screens and measurement of their transmitted luminance levels
DC99/121254 DC99/121254. Draft British Standard, BS ISO 2929, Rubber hoses for bulk fuel truck delivery - Specification
BS EN ISO 13760:2000, BS 2782-11:Method 1120M:2000 BS EN ISO 13760:2000, BS 2782-11:Method 1120M:2000. Plastics pipes for the conveyance of fluids under pressure. Miner's rule. Calculation method for cumulative damage
DC99/645130 DC99/645130. Draft British Standard, BS ISO/IEC 10021-10-A1, Information technology -, Message Handling Systems (MHS):. Routing
BS EN 12832:1999 BS EN 12832:1999. Characterisation of sludges. Utilisation and disposal of sludges. Vocabulary
BS EN ISO 489:1999, BS 2782-5:Method 531A:1999 BS EN ISO 489:1999, BS 2782-5:Method 531A:1999. Plastics. Determination of refractive index
PAS 32-1:1999 PAS 32-1:1999. Specification for examination and test of new lifts before putting into service. Electric traction lifts
DC99/645512 DC99/645512. Draft British Standard BS ISO/IEC 9594-5 & ISO/IEC 9594-6-A5 Information technology - Open Systems Interconnection - The Directory. Protocol specifications
DD ENV 13459-2:1999 DD ENV 13459-2:1999. Road marking. Materials. Quality control. Guidelines for preparing quality plans for materials application
DD ENV 13459-3:1999 DD ENV 13459-3:1999. Road marking. Materials. Quality control. Performance in use
DD ENV 13459-1:1999 DD ENV 13459-1:1999. Road marking. Materials. Quality control. Sampling from storage and testing
PD R044-001:1999 PD R044-001:1999. Safety of machinery. Guidance and recommendations for the avoidance of hazards due to static electricity
BS EN 12287:1999 BS EN 12287:1999. In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Description of reference materials
BS EN 12006-1:1999 BS EN 12006-1:1999. Non-active surgical implants. Particular requirements for cardiac and vascular implants. Heart valve substitutes
BS ISO 11357-3:1999 BS ISO 11357-3:1999. Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization
BS ISO 11357-2:1999 BS ISO 11357-2:1999. Plastics. Differential scanning calorimetry (DSC). Determination of glass transition temperature
BS EN 10253-1:1999 BS EN 10253-1:1999. Butt-welding pipe fittings. Wrought carbon steel for general use and without specific inspection requirements
BS EN 12402:1999 BS EN 12402:1999. Lead and lead alloys. Methods of sampling for analysis
BS EN 12752-1:1999 BS EN 12752-1:1999. Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW. Safety
BS EN 12752-2:1999 BS EN 12752-2:1999. Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW. Rational use of energy
DC99/121101 DC99/121101. Draft British Standard, BS ISO 15014, Extruded sheets of polyvinylidene fluoride (PVDF) - Requirements and test, methods
DC99/121102 DC99/121102. Draft British Standard, BS EN 15527, Compression moulded sheets of polyethylene (PE-UHMW, PE-HMW, PE-HD) -, Requirements and test methods
BS EN 12534:1999 BS EN 12534:1999. Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels. Classification
BS EN 1251-1:2000 BS EN 1251-1:2000. Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1000 litres volume. Fundamental requirements
BS EN 1251-3:2000 BS EN 1251-3:2000. Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1000 litres volume. Operational requirements
BS 5929-10:1999, ISO 11037:1999 BS 5929-10:1999, ISO 11037:1999. Methods for sensory analysis of food. General guidance and test method for assessment of the colour of foods
BS ISO 15529:1999 BS ISO 15529:1999. Optics and optical instruments. Optical transfer function. Principles of measurement of modular transfer function (MTF) of sampled imaging systems
BS EN ISO 2566-1:1999 BS EN ISO 2566-1:1999. Steel. Conversion of elongation values. Carbon and low alloy steels
BS EN ISO 7500-1:1999 BS EN ISO 7500-1:1999. Metallic materials. Verification of static uniaxial testing machines. Tension/compression testing machines. Verification and calibration of the force-measuring system
BS EN ISO 7500-2:1999 BS EN ISO 7500-2:1999. Metallic materials. Verification of static uniaxial testing machines. Tension creep testing machines. Verification of the applied load
BS EN 10274:1999 BS EN 10274:1999. Metallic materials. Drop weight tear test
BS EN 10275:1999 BS EN 10275:1999. Metallic materials. Tube ring hydraulic pressure test
BS EN ISO 7438:2000 BS EN ISO 7438:2000. Metallic materials. Bend test
BS EN ISO 7799:2000 BS EN ISO 7799:2000. Metallic materials. Sheet and strip 3 mm thick or less. Reverse bend test
BS EN ISO 6506-1:1999 BS EN ISO 6506-1:1999. Metallic materials. Brinell hardness test. Test method
BS EN ISO 6506-2:1999 BS EN ISO 6506-2:1999. Metallic materials. Brinell hardness test. Verification and calibration of Brinell hardness testing machines
BS EN ISO 6506-3:1999 BS EN ISO 6506-3:1999. Metallic materials. Brinell hardness test. Calibration of reference blocks
BS EN ISO 6508-1:1999 BS EN ISO 6508-1:1999. Metallic materials. Rockwell hardness test. Test method (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN ISO 6508-2:1999 BS EN ISO 6508-2:1999. Metallic materials. Rockwell hardness test. Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN ISO 6508-3:1999 BS EN ISO 6508-3:1999. Metallic materials. Rockwell hardness test. Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN 993-17:1999 BS EN 993-17:1999. Methods of test for dense shaped refractory products. Determination of bulk density of granular materials by the mercury method with vacuum
BS EN ISO 9606-5:2000 BS EN ISO 9606-5:2000. Approval testing of welders. Fusion welding. Titanium and titanium alloys, zirconium and zirconium alloys
BS EN 12659:1999 BS EN 12659:1999. Lead and lead alloys. Lead
BS EN 12070:2000 BS EN 12070:2000. Welding consumables. Wire electrodes, wires and rods for arc welding of creep-resisting steels. Classification
BS EN 12071:2000 BS EN 12071:2000. Welding consumables. Tubular electrodes for gas shielded metal arc welding of creep-resisting steels. Classification
BS EN 12072:2000 BS EN 12072:2000. Welding consumables. Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels. Classification
BS EN 12073:2000 BS EN 12073:2000. Welding consumables. Tubular cored electrodes for metal arc welding with or without a gas shield of stainless and heat-resisting steels. Classification
BS EN 589:1999 BS EN 589:1999. Automotive fuels. LPG. Requirements and test methods
BS EN 1047-2:2000 BS EN 1047-2:2000. Secure storage units. Classification and methods of test for resistance to fire. Data rooms and data containers
BS EN 631-2:1999 BS EN 631-2:1999. Materials and articles in contact with foodstuffs. Catering containers. Dimensions of accessories and supports
BS EN 581-3:1999 BS EN 581-3:1999. Outdoor furniture. Seating and tables for camping, domestic and contract use. Mechanical safety requirements and test methods for tables
BS EN 12188:1999 BS EN 12188:1999. Products and systems for the protection and repair of concrete structures. Test methods. Determination of adhesion steel-to-steel for characterization of structural bonding agents
BS EN 12189:1999 BS EN 12189:1999. Products and systems for the protection and repair of concrete structures. Test methods. Determination of open time
BS EN 12192-2:1999 BS EN 12192-2:1999. Products and systems for the protection and repair of concrete structures. Granulometry analysis. Test method for fillers for polymer bonding agents
BS EN 12615:1999 BS EN 12615:1999. Products and systems for the protection and repair of concrete structures. Test methods. Determination of slant shear strength
BS EN 12636:1999 BS EN 12636:1999. Products and systems for the protection and repair of concrete structures. Test methods. Determination of adhesion concrete to concrete
BS EN 228:1999 BS EN 228:1999. Automotive fuels. Unleaded petrol. Requirements and test methods
BS EN 590:1999 BS EN 590:1999. Automotive fuels. Diesel. Requirements and test methods
DC99/561890 DC99/561890. Draft British Standard BS 4275 (1997)-A1 Guide to implementing an effective respiratory protective device programme
BS EN ISO 3001:1999 BS EN ISO 3001:1999. Plastics. Epoxy compounds. Determination of epoxy equivalent
BS EN ISO 9363-1:1999 BS EN ISO 9363-1:1999. Optics and optical instruments. Contact lenses. Determination of cytotoxicity of contact lens material. Agar overlay test and growth inhibition test
BS EN 50319:1999 BS EN 50319:1999. Proximity devices. Requirements for proximity devices with analogue output
BS EN 148-1:1999 BS EN 148-1:1999. Respiratory protective devices: threads for facepieces. Standard thread connection
BS EN 148-2:1999 BS EN 148-2:1999. Respiratory protective devices: threads for facepieces. Centre thread connection
BS EN 12856:1999 BS EN 12856:1999. Foodstuffs. Determination of acesulfame-K, aspartame and saccharin. High performance liquid chromatographic method
BS ISO 13050:1999 BS ISO 13050:1999. Curvilinear toothed synchronous belt drive systems
PD CR ISO 13434:1999 PD CR ISO 13434:1999. Guidelines on durability of geotextiles and geotextile-related products
BS ISO 10946:1999 BS ISO 10946:1999. Hydraulic fluid power. Gas-loaded accumulators with separator. Selection of preferred hydraulic ports
BS ISO 6194-4:1999 BS ISO 6194-4:1999. Rotary shaft lip type seals. Performance test procedures
BS EN 12857:1999 BS EN 12857:1999. Foodstuffs. Determination of cyclamate. High performance liquid chromatographic method
BS EN 12327:2000 BS EN 12327:2000. Gas supply systems. Pressure testing, commissioning and decommissioning procedures. Functional requirements
BS EN 12246:1999 BS EN 12246:1999. Quality classification of timber used in pallets and packaging
BS EN 12248:1999 BS EN 12248:1999. Sawn timber used in industrial packaging. Permitted deviations and preferential sizes
BS EN 12249:1999 BS EN 12249:1999. Sawn timber used in pallets. Permitted deviations and guidelines for dimensions
BS EN 1286:1999 BS EN 1286:1999. Sanitary tapware. Low pressure mechanical mixing valves. General technical specification
DD ENV 1402-8:1999 DD ENV 1402-8:1999. Unshaped refractory products. Determination of complementary properties
BS 6782-11:1999, ISO 14446:1999 BS 6782-11:1999, ISO 14446:1999. Binders for paints. Determination of the viscosity of industrial cellulose nitrate solutions and their classification
DC00/704294 DC00/704294. Draft British Standard, BS EN 962-A2, Transportable gas cylinders - Valve protection caps and valve guards, for industrial and medical gas cylinders -, Design, construction and tests Amendment No 2
BS EN 233:1999 BS EN 233:1999. Wallcoverings in roll form. Specification for finished wallpapers, wall vinyls and plastics wallcoverings
BS EN 937:1999 BS EN 937:1999. Chemicals used for treatment of water intended for human consumption. Chlorine
BS EN ISO 11981:1999, BS 7208-22:1999 BS EN ISO 11981:1999, BS 7208-22:1999. Ophthalmic optics. Contact lenses and contact lens care products. Determination of physical compatibility of contact lens care products with contact lenses
BS EN ISO 13212:1999, BS 7208-20:1999 BS EN ISO 13212:1999, BS 7208-20:1999. Ophthalmic optics. Contact lens care products. Guidelines for the determination of shelf-life
BS EN ISO 12570:2000 BS EN ISO 12570:2000. Hygrothermal performance of building materials and products. Determination of moisture content by drying at elevated temperature
BS EN ISO 12571:2000 BS EN ISO 12571:2000. Hygrothermal performance of building materials and products. Determination of hygroscopic properties
BS ISO 18917:1999 BS ISO 18917:1999. Photography. Determination of residual thiosulfate and other related chemicals in processed photographic materials. Methods using iodine-amylose, methylene blue and silver sulfide
BS EN 12900:1999 BS EN 12900:1999. Refrigerant compressors. Rating conditions, tolerances and presentation of manufacturer's performance data
BS EN 12827:1999 BS EN 12827:1999. Inland navigation vessels. Connections for the transfer of diesel oil
BS 1181:1999 BS 1181:1999. Specification for clay flue terminals
BS EN 1767:1999 BS EN 1767:1999. Products and systems for the protection and repair of concrete structures. Test methods. Infrared analysis
BS EN 1718:1999 BS EN 1718:1999. Light conveyor belts. Test method for the measurement of the electrostatic field generated by a running light conveyor belt
BS ISO 7176-1:1999 BS ISO 7176-1:1999. Wheelchairs. Determination of static stability
BS EN 60522:1999, IEC 60522:1999 BS EN 60522:1999, IEC 60522:1999. Determination of the permanent filtration of X-ray tube assemblies
BS EN 60068-2-77:1999, IEC 60068-2-77:1999 BS EN 60068-2-77:1999, IEC 60068-2-77:1999. Environmental testing. Test methods. Body strength and impact shock
BS EN 60068-2-21:1999, IEC 60068-2-21:1999 BS EN 60068-2-21:1999, IEC 60068-2-21:1999. Environmental testing. Test methods. Test U. Robustness of terminations and integral mounting devices
BS EN 61223-3-1:1999, IEC 61223-3-1:1999 BS EN 61223-3-1:1999, IEC 61223-3-1:1999. Evaluation and routine testing in medical imaging departments. Acceptance tests. Imaging performance of X-ray equipment for radiographic and radiscopic systems
BS EN 60601-2-44:1999, BS 5724-2.44:1999,IEC 60601-2-44:1999 BS EN 60601-2-44:1999, BS 5724-2.44:1999,IEC 60601-2-44:1999. Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of X-ray equipment for computed tomography
BS EN 60601-2-29:1999, BS 5724-2.129:1999,IEC 60601-2-29:1999 BS EN 60601-2-29:1999, BS 5724-2.129:1999,IEC 60601-2-29:1999. Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of radiotherapy simulators
ISO/IEC11574 : 2000 ISO/IEC11574 : 2000 . ISO/IEC 11574 SECOND EDITION Information technology - telecommunications and information exchange between systems - Private Integrated Services Network (PISN) - Circuit- mode 64 kbit/s bearer services - Service description, functional capabilities and information flows
ISO/IEC17875 : 2000 ISO/IEC17875 : 2000 . ISO/IEC 17875 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network (PISN) - Specification, functional model and information flows - Private User Mobility (PUM) - Registration supplementary service
WD/ISO/IEC17876 : 2000 WD/ISO/IEC17876 : 2000 . ISO/IEC 17876 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network (PISN) - Inter- exchange signalling protocol - Private User Mobility (PUM) - Registration supplementary service
ISO/IEC17877 : 2000 ISO/IEC17877 : 2000 . ISO/IEC 17877 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network (PISN) - Specification, functional model and information flows - Private User Mobility (PUM) - Call handling additional network features
WD/ISO/IEC17878 : 2000 WD/ISO/IEC17878 : 2000 . ISO/IEC 17878 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network (PISN) - Inter- exchange signalling protocol - Private User Mobility (PUM) - Call handling additional netwrok features
BS EN ISO 8973:1999, BS 2000-432:1999 BS EN ISO 8973:1999, BS 2000-432:1999. Liquefied petroleum gases. Calculation method for density and vapour pressure
BS EN ISO 11120:1999 BS EN ISO 11120:1999. Gas cylinders. Refillable seamless steel tubes for compressed gas transport, of water capacity between 150l and 3000l. Design, construction and testing
BS EN ISO 14922-1:1999 BS EN ISO 14922-1:1999. Thermal spraying. Quality requirements of thermally sprayed structures. Guidance for selection and use
BS EN ISO 14922-2:1999 BS EN ISO 14922-2:1999. Thermal spraying. Quality requirements of thermally sprayed structures. Comprehensive quality requirements
BS EN ISO 14922-3:1999 BS EN ISO 14922-3:1999. Thermal spraying. Quality requirements of thermally sprayed structures. Standard quality requirements
BS EN ISO 14922-4:1999 BS EN ISO 14922-4:1999. Thermal spraying. Quality requirements of thermally sprayed structures. Elementary quality requirements
BS EN ISO 11244:2000 BS EN ISO 11244:2000. Dental brazing investments
BS EN 868-2:1999 BS EN 868-2:1999. Packaging materials and systems for medical devices which are to be sterilized. Sterilization wrap. Requirements and test methods
BS EN 868-3:1999 BS EN 868-3:1999. Packaging materials and systems for medical devices which are to be sterilized. Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5). Requirements and test methods
BS EN 868-4:1999 BS EN 868-4:1999. Packaging materials and systems for medical devices which are to be sterilized. Paper bags. Requirements and test methods
BS EN 868-6:1999 BS EN 868-6:1999. Packaging materials and systems for medical devices which are to be sterilized. Paper for the manufacture of packs for medical use for sterilization by ethylene oxide or irradiation. Requirements and test methods
BS EN 868-7:1999 BS EN 868-7:1999. Packaging materials and systems for medical devices which are to be sterilized. Adhesive coated paper for the manufacture of heat sealable packs for medical use for sterilization by ethylene oxide or irradiation. Requirements and test methods
BS EN 868-8:1999 BS EN 868-8:1999. Packaging materials and systems for medical devices which are to be sterilized. Re-usable sterilization containers for steam sterilizers conforming to EN 285. Requirements and test methods
DD ENV 12625-2:1999 DD ENV 12625-2:1999. Tissue paper and tissue products. Procedures for sampling and conditioning
BS EN 1761:1999 BS EN 1761:1999. Rubber hoses and hose assemblies for fuel truck delivery. Specification
BS EN 1363-2:1999 BS EN 1363-2:1999. Fire resistance tests. Alternative and additional procedures
BS EN 1364-1:1999 BS EN 1364-1:1999. Fire resistance tests for non-loadbearing elements. Walls
BS EN 1364-2:1999 BS EN 1364-2:1999. Fire resistance tests for non-loadbearing elements. Ceilings
BS EN 1366-2:1999 BS EN 1366-2:1999. Fire resistance tests for service installations. Fire dampers
BS EN 1363-1:1999 BS EN 1363-1:1999. Fire resistance tests. General requirements
BS EN 1365-1:1999 BS EN 1365-1:1999. Fire resistance tests for loadbearing elements. Walls
BS EN 1365-2:2000 BS EN 1365-2:2000. Fire resistance tests for loadbearing elements. Floors and roofs
BS EN 1365-3:2000 BS EN 1365-3:2000. Fire resistance tests for loadbearing elements. Beams
BS EN 1365-4:1999 BS EN 1365-4:1999. Fire resistance tests for loadbearing elements. Columns
BS EN 1366-1:1999 BS EN 1366-1:1999. Fire resistance tests for service installations. Fire resistance tests for service installations. Ducts
BS EN 1634-1:2000 BS EN 1634-1:2000. Fire resistance tests for door and shutter assemblies. Fire doors and shutters
DD ENV 10169-2:1999 DD ENV 10169-2:1999. Continuously organic coated (coil coated) steel flat products. Products for building exterior applications
BS EN ISO 8974:1999, BS 2782-4:Method 451R:1999 BS EN ISO 8974:1999, BS 2782-4:Method 451R:1999. Plastics. Phenolic resins. Determination of residual phenol content by gas chromatography
BS AU 50-4.6.2b:1999, ISO 5751-3:1999 BS AU 50-4.6.2b:1999, ISO 5751-3:1999. Tyres and wheels. Rim profiles and dimensions. Motorcycle rims. Specification for metric series 100, 90, 80, 70, 60, 55 & 50 rims. Motorcycle rims Specification for metric series 100, 90, 80, 70, 60, 55 and 50 rims
BS EN 10228-1:1999 BS EN 10228-1:1999. Non-destructive testing of steel forgings. Magnetic particle inspection
BS EN ISO 1599:1999 BS EN ISO 1599:1999. Plastics. Cellulose acetate. Determination of viscosity loss on moulding
BS 4965:1999 BS 4965:1999. Decorative laminated plastics sheet veneered boards and panels
BS EN 704:1999 BS EN 704:1999. Agricultural machinery. Pick-up balers. Safety
BS EN 745:1999 BS EN 745:1999. Agricultural machinery. Rotary mowers and flail-mowers. Safety
BS EN 12674-1:1999 BS EN 12674-1:1999. Roll containers. Terminology
BS EN 12830:1999 BS EN 12830:1999. Temperature recorders for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream. Tests, performance and suitability
BS EN ISO 10304-4:2000, BS 6068-2.66:1999 BS EN ISO 10304-4:2000, BS 6068-2.66:1999. Water quality. Determination of dissolved anions by liquid chromatography of ions. Determination of dissolved chlorate, chloride and chlorite in water with low contamination
BS EN 12619:1999 BS EN 12619:1999. Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases. Continuous flame ionization detector method
BS 598-110:1998 BS 598-110:1998. Sampling and examination of bituminous mixtures for roads and other paved areas. Methods of test for the determination of wheel-tracking rate and depth
BS EN 267:1999 BS EN 267:1999. Forced draught oil burners. Definitions, requirements, testing, marking
BS EN 12449:1999 BS EN 12449:1999. Copper and copper alloys. Seamless, round tubes for general purposes
WD/BS5500 EQ106 WD/BS5500 EQ106. BS 5500:ENQ 106:R1 Examples to illustrate the assessment of vessels subject to fatigue Revision
BS EN 10277-1:1999 BS EN 10277-1:1999. Bright steel products. Technical delivery conditions. General
BS EN 10277-3:1999 BS EN 10277-3:1999. Bright steel products. Technical delivery conditions. Free cutting steels
BS EN 10277-4:1999 BS EN 10277-4:1999. Bright steel products. Technical delivery conditions. Case-hardening steels
BS EN 10277-5:1999 BS EN 10277-5:1999. Bright steel products. Technical delivery conditions. Steels for quenching and tempering
DC99/707902 DC99/707902. Draft British Standard, BS ISO 15086-1, Hydraulic Fluid Power - Determination of the fluid borne noise, characteristics of components and systems -. Introduction
BS EN 12861:1999 BS EN 12861:1999. Copper and copper alloys. Scrap
BS EN 1905:1999, BS 2782-11:Method 1105C:1999 BS EN 1905:1999, BS 2782-11:Method 1105C:1999. Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material. Method for assessment of the PVC content based on total chlorine content
BS A 346:2000, ISO 3161:1999 BS A 346:2000, ISO 3161:1999. UNJ threads. General requirements and limit dimensions
BS 6049-9:1999, ISO 15598:1999 BS 6049-9:1999, ISO 15598:1999. Methods of test for tea. Determination of crude fibre content
BS ISO 11316:1999 BS ISO 11316:1999. Photography. Projection of still pictures. Measuring methods for the evaluation of imaging properties
BS EN 186300:1999 BS EN 186300:1999. Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables type MSC
BS 1016-104.1:1999, ISO 11722:1999 BS 1016-104.1:1999, ISO 11722:1999. Methods for analysis and testing of coal and coke. Proximate analysis. Determination of moisture content of the general analysis test sample. Determination of ash
BS EN ISO 9917-2:2000 BS EN ISO 9917-2:2000. Dental water-based cements. Light-activated cements
BS ISO 14224:1999 BS ISO 14224:1999. Petroleum and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
BS EN 1059:1999 BS EN 1059:1999. Timber structures. Product requirements for prefabricated trusses using punched metal plate fasteners
BS EN 1097-5:1999 BS EN 1097-5:1999. Tests for mechanical and physical properties of aggregates. Determination of the water content by drying in a ventilated oven
BS EN 1097-7:1999 BS EN 1097-7:1999. Tests for mechanical and physical properties of aggregates. Determination of the particle density of filler. Pyknometer method
BS EN 12955:1999 BS EN 12955:1999. Foodstuffs. Determination of aflatoxin B1, and the sum of aflatoxins B1, B2, G1 and G2 in cereals, shell-fruits and derived products. High performance liquid chromatographic method with post column derivatization and immunoaffinity column clean up
BS EN 12808-1:1999 BS EN 12808-1:1999. Adhesives and grouts for tiles. Determination of chemical resistance of reaction resin mortars
BS EN ISO 1043-3:1999 BS EN ISO 1043-3:1999. Plastics. Symbols and abbreviated terms. Plasticizers
BS EN 12450:1999 BS EN 12450:1999. Copper and copper alloys. Seamless, round copper capillary tubes
BS EN 12452:1999 BS EN 12452:1999. Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers
BS EN 12451:1999 BS EN 12451:1999. Copper and copper alloys. Seamless, round tubes for heat exchangers
BS EN ISO 6222:1999, BS 6068-4.5:1999 BS EN ISO 6222:1999, BS 6068-4.5:1999. Water quality. Enumeration of culturable micro-organisms. Colony count by inoculation in a nutrient agar culture medium
BS EN ISO 3650:1999 BS EN ISO 3650:1999. Geometrical product specifications (GPS). Length standards. Gauge blocks
BS EN ISO 9946:1999 BS EN ISO 9946:1999. Manipulating industrial robots. Presentation of characteristics
BS EN ISO 9787:1999 BS EN ISO 9787:1999. Manipulating industrial robots. Coordinate systems and motion nomenclatures
BS EN 62037:2000, IEC 62037:1999 BS EN 62037:2000, IEC 62037:1999. RF connectors, connector cable assemblies and cables. Intermodulation level measurement
BS EN 536:1999 BS EN 536:1999. Road construction machines. Asphalt mixing plants. Safety requirements
BS ISO 8835-2:1999 BS ISO 8835-2:1999. Inhalational anaesthesia systems. Anaesthetic breathing systems for adults
BS EN ISO 1043-1:1999 BS EN ISO 1043-1:1999. Plastics. Symbols and abbreviated terms. Basic polymers and their special characteristics
BS EN ISO 1043-4:1999 BS EN ISO 1043-4:1999. Plastics. Symbols and abbreviated terms. Flame retardants
BS EN ISO 12952-1:1999 BS EN ISO 12952-1:1999. Textiles. Burning behaviour of bedding items. General test methods for the ignitability by a smouldering cigarette
BS EN ISO 12952-2:1999 BS EN ISO 12952-2:1999. Textiles. Burning behaviour of bedding items. Specific test methods for the ignitability by a smouldering cigarette
BS EN ISO 12952-3:1999 BS EN ISO 12952-3:1999. Textiles. Burning behaviour of bedding items. General test methods for the ignitability by a small open flame
BS EN ISO 12952-4:1999 BS EN ISO 12952-4:1999. Textiles. Burning behaviour of bedding items. Specific test methods for the ignitability by a small open flame
DD ENV 1402-4:2000 DD ENV 1402-4:2000. Unshaped refractory products. Determination of consistency of castables
DD ENV 1402-5:2000 DD ENV 1402-5:2000. Unshaped refractory products. Preparation and treatment of test pieces
BS EN 1372:2000 BS EN 1372:2000. Adhesives. Test method for adhesives for floor and wall coverings. Peel test
BS EN 1373:2000 BS EN 1373:2000. Adhesives. Test method for adhesives for floor and wall coverings. Shear test
DC00/706576 DC00/706576. Draft British Standard BS 5F 118 50 g/m2 nylon parachute fabric
DC00/706577 DC00/706577. Draft British Standard BS 4F 119 145 g/m2 to 235 g/m2 nylon parachute fabric
DC00/706578 DC00/706578. Draft British Standard BS 3F 126 35 g/m2 nylon parachute fabric
BS 5202-1:2000, ISO 2817:1999 BS 5202-1:2000, ISO 2817:1999. Methods for chemical analysis of tobacco and tobacco products. Determination of silicated residues insoluble in hydrochloric acid
BS EN 45510-4-6:1999 BS EN 45510-4-6:1999. Guide for the procurement of power station equipment. Boiler auxiliaries. Flue gas desulfurization (De-SOx) plant. Flue gas desulphurization (De-SOx) plant
BS EN 45510-2-2:1999 BS EN 45510-2-2:1999. Guide for the procurement of power station equipment. Electrical equipment. Uninterruptible power supplies. Uninterruptible power supplies for power plants
BS EN 1443:1999 BS EN 1443:1999. Chimneys. General requirements
BS ISO/IEC 10026-3:1998 BS ISO/IEC 10026-3:1998. Information technology. Open systems interconnection. Distributed transaction processing. Protocol specification
BS ISO/IEC 13874:1999 BS ISO/IEC 13874:1999. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Inter-exchange signalling protocol. Path replacement additional network feature
PD 6634-6:1999 PD 6634-6:1999. Vehicle restraint systems. Crashworthy roadside features. Impact attenuators
BS ISO 10303-45:1998 BS ISO 10303-45:1998. Industrial automation systems and integration. Product data representation and exchange. Integrated generic resource: Materials
ISO/IEC8882-3 : 2000 ISO/IEC8882-3 : 2000 . ISO/IEC 8882-3 Information technology - Telecommunications and information exchange between systems - X.25 DTE conformance testing. Packet layer conformance test suite
BS 6914-5:1999, ISO 7136:1998 BS 6914-5:1999, ISO 7136:1998. Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Glossary for pipelayers
BS 5766-3:1999, ISO 6491:1998 BS 5766-3:1999, ISO 6491:1998. Methods for analysis of animal feeding stuffs. Determination of phosphorus content (spectrometic method)
BS ISO 8135:1999 BS ISO 8135:1999. Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series. Tolerances
BS EN 60811-4-2:2000, IEC 60811-4-2:1990 BS EN 60811-4-2:2000, IEC 60811-4-2:1990. Insulating and sheathing materials of electric cables. Common test methods. Methods specific to polyethylene and polypropylene compounds. Tensile strength and elongation at break after pre-conditioning. Wrapping test after thermal ageing in air. Measurement of mass increase. Long-term stability test. Test method for copper-catalysed oxidative degradation
PD ISO/TR 14061:1998, ISO/TR 14061:1998 PD ISO/TR 14061:1998, ISO/TR 14061:1998. Information to assist forestry organizations in the use of environmental management system standards ISO 14001 and ISO 14004
DC99/120930 DC99/120930. Draft British Standard, BS 5325 AMD 1, Code of practice for installation of textile floor coverings AMD 1
KIT 7 KIT 7. Fire detection and alarm pack
KIT 1 KIT 1. Aluminium and aluminium alloys pack
KIT 9 KIT 9. Ergonomic requirements for visual display terminals (VDTs/VDUs)
KIT 14 KIT 14. Structural use of steelwork in building set
KIT 5 KIT 5. Environmental management series
KIT 10 KIT 10. Playground equipment safety set
KIT 4 KIT 4. Paints and varnishes pack
KIT 2 KIT 2. Arc welding pack
PP 7312 Kit PP 7312 Kit. 11 Standards for teachers and students of structural design
KIT 33 KIT 33. Metrology kit
KIT 11 KIT 11. Workmanship set (BS 8000)
KIT 8 KIT 8. Safety of machinery pack
KIT 6 KIT 6. Electromagnetic compatibility pack
KIT 15 KIT 15. Toy safety pack
DC99/561490 DC99/561490. Ergonomics. Evaluation of working postures (ISO 11226)
DC99/561489 DC99/561489. BS ISO 3864-1. Safety colours and safety signs. Part 1. Safety signs in workplaces and public areas. Design principles (ISO 3864-1)
DC99/704102 DC99/704102. ISO 15138. Petroleum and natural gas industries. Offshore production installations. Heating, ventilation and air conditioning
99/645128DC 99/645128DC. ISO/IEC 18053. Information technology, Telecommunications and information exchange between systems. Glossary of definitions and terminology for computer supported telecommunications applications (CSTA) phase III
DC99/645127 DC99/645127. ISO/IEC 18052. Information technology. Telecommunications and information exchange between systems. Protocol for computer supported telecommunications applications (CSTA) phase III
DC99/645126 DC99/645126. ISO/IEC 18051. Information technology. Telecommunications and information exchange between systems. Services for computer supported telecommunications applications (CSTA) phase III
DC99/540022 DC99/540022. BS 7273:Part 3. British Standard Code of Practice for the operation of fire protection measures. Electrical actuation of pre-action sprinkler systems
BS EN 12021:1999 BS EN 12021:1999. Respiratory protective devices. Compressed air for breathing apparatus
DD ENV 1099:1998 DD ENV 1099:1998. Plywood. Biological durability. Guidance for the assessment of plywood for use in different hazard classes
DC99/240396 DC99/240396. IEC 60695-1-3 ED 1. Fire hazard testing. Part 1-3. Guidance for the preparation of requirements and test specifications for assessing fire hazard of electrotechnical products. Guidance for use of pre-selection procedures (IEC DOCUMENT 89/332/CD)
BS EN 12130:1998 BS EN 12130:1998. Feather and down. Test methods. Determination of the filling power (massic volume)
DC99/402588 DC99/402588. BS EN ISO 9004. Quality management systems. Guidance for performance improvement
DC99/402587 DC99/402587. BS EN ISO 9001. Quality management systems. Requirements
DC99/402586 DC99/402586. BS EN ISO 9000. Quality management systems. Fundamentals and vocabulary
BS IEC 61467:1997 BS IEC 61467:1997. Insulators for overhead lines with a nominal voltage above 1000 V. AC power arc tests on insulator sets
DC99/704670 DC99/704670. ISO/CD 16147. Small craft. Inboard-mounted diesel engine fuel and electrical systems components
DC99/201215 DC99/201215. IEC 62071. Helican-scan compressed digital video cassette recording system using 6,35 mm magnetic tape, format D-7 (IEC document 100B/210/CDV)
DC99/561487 DC99/561487. Water quality. Determination of selected organic plant protection agents. Automated multiple development (AMD) technique (ISO/DIS 11370)
DC99/561486 DC99/561486. Soil quality. Determination of cyanide (ISO/DIS 11262)
DC99/120758 DC99/120758. Solid mineral fuels. Determination of trace elements. Flame atomic absorption method (ISO/DIS 8983)
DC99/702865 DC99/702865. ISO 3727-2. Butter. Determination of moisture, non-fat solids and fat contents (reference method). Part 2. Determination of non-fat solids content
DC99/402352 DC99/402352. prEN 1389. Advanced technical ceramics. Ceramic composites. Physical properties. Determination of density and apparent porosity
DC99/120743 DC99/120743. Coal. Determination of five extractable inorganic ions (=ISO/CD 1952)
BS ISO/IEC 13863:1998 BS ISO/IEC 13863:1998. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Specification, functional model and information flows. Path replacement additional network feature
BS ISO/IEC 10737:1998 BS ISO/IEC 10737:1998. Information technology. Elements of management information related to the OSI Transport layer
BS EN ISO 14597:1999, BS 2000-433:1999 BS EN ISO 14597:1999, BS 2000-433:1999. Petroleum products. Determination of vanadium and nickel content. Wavelength-dispersive X-ray fluorescence spectrometry
BS ISO/IEC 7942-3:1999 BS ISO/IEC 7942-3:1999. Information technology. Computer graphics and image processing. Graphical Kernel System (GKS). Audit trail
BS IEC 60943:1998 BS IEC 60943:1998. Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals
BS EN ISO 4157-1:1999 BS EN ISO 4157-1:1999. Construction drawings. Designation systems. Buildings and parts of buildings
PD IEC TR 61911:1999, IEC TR 61911:1998 PD IEC TR 61911:1999, IEC TR 61911:1998. Live working. Installation of distribution line conductors. Stringing equipment and accessory items
PD IEC TR 60870-6-504:1999, IEC TR 60870-6-504:1998 PD IEC TR 60870-6-504:1999, IEC TR 60870-6-504:1998. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendations. TASE.1 user conventions
BS EN 1824:1998 BS EN 1824:1998. Road marking materials. Road trials
PD 3542:1998 PD 3542:1998. Standards and quality management. An integrated approach
99/240538DC 99/240538DC. IEC 60684-3-406/408 Ed.2. Flexible insulating sleeving. Part 3. Specification requirements for individual types of sleeving. Sheets 406-408. Glass textile sleeving with PVC coating (IEC document 15C/1035/CD)
BS IEC 60877:1999 BS IEC 60877:1999. Procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service
BS ISO/IEC 8859-8:1999 BS ISO/IEC 8859-8:1999. Information technology. 8-bit single-byte coded graphic character sets. Latin/Hebrew alphabet
BS ISO/IEC 8859-14:1998 BS ISO/IEC 8859-14:1998. Information technology. 8-bit single-byte coded graphic character sets. Latin alphabet No. 8 (Celtic)
BS ISO/IEC ISP 15125-7:1998 BS ISO/IEC ISP 15125-7:1998. Information technology. International Standardized Profiles ADYnn. OSI Directory. ADY43. DSA to DSA authentication
BS ISO/IEC 9646-3:1998 BS ISO/IEC 9646-3:1998. Information technology. Open systems interconnection. Conformance testing methodology and framework. The Tree and tabular combined notation (TTCN)
BS ISO/IEC 10026-5:1998 BS ISO/IEC 10026-5:1998. Information technology. Open systems interconnection. Distributed transaction processing. Application context proforma and guidelines when using OSI TP
99/120630DC 99/120630DC. prEN 13482. Rubber hoses and hose assemblies for asphalt and bitumen. Specification
BS ISO/IEC TR 15410:1998 BS ISO/IEC TR 15410:1998. Information technology. Telecommunications and information exchange between systems. PISN mobility-general principles and services aspects
BS ISO/IEC 13248-2:1998 BS ISO/IEC 13248-2:1998. Information technology. Open systems interconnection. The directory. Protocol implementation conformance statement (PICS) proforma for the directory system protocol
BS ISO/IEC 13248-1:1998 BS ISO/IEC 13248-1:1998. Information technology. Open systems interconnection. The directory. Protocol implementation conformance statement (PICS) proforma for the directory access protocol
BS ISO/IEC 13236:1998 BS ISO/IEC 13236:1998. Information technology. Quality of service:Framework
BS ISO/IEC 10733:1998 BS ISO/IEC 10733:1998. Information technology. Elements of management information related to the OSI network layer
BS ISO 8802-12:1998 BS ISO 8802-12:1998. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Demand-priority access method, physical layer and repeater specifications
BS A 345:1999, ISO 8538:1999 BS A 345:1999, ISO 8538:1999. Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C, 1100 MPa (at ambient temperature)/425°C. Dimensions
99/704412DC 99/704412DC. ISO/DIS 6312. Road vehicles. Brake linings. Shear test procedure for disc brake pad and drum brake shoe assemblies
99/705108DC 99/705108DC. EN 4019. Aerospace series. Pipe coupling 8° 30' in titanium alloy. Elbows 90°, welded (prEN 4019 edition 1)
99/645102DC 99/645102DC. ISO/IEC 11572. Information technology. Telecommunications and information exchange between systems. Private integrated services network (PISN). Circuit mode bearer services. Inter-exchange signalling procedures and protocol
99/645100DC 99/645100DC. ISO/IEC 15505. Information technology. Telecommunications and information exchange between systems. Private integrated services network (PISN). Specification, functional model and information flows. Message waiting indication supplementary service
99/645104DC 99/645104DC. ISO/IEC 17875. Information technology. Telecommunications and information exchange between systems. Private integrated services network (PISN). Specification, functional model and information flows. Private user mobility (PUM). Registration supplementary service
99/645105DC 99/645105DC. ISO/IEC 17876. Information technology. Telecommunications and information exchange between systems. Private integrated services network (PISN). Inter-exchange signalling protocol. Private user mobility (PUM). Registration supplementary service
99/645106DC 99/645106DC. ISO/IEC 17877. Information technology. Telecommunications and information exchange between systems. Private integrated services network (PISN). Specifications, functional model and information flows. Private user mobility (PUM). Call handling additional network features
99/645103DC 99/645103DC. ISO/IEC 11574. Information technology. Telecommunications and information exchange between systems. Private integrated services network (PISN). Circuit-mode 64KBIT/S bearer services. Service description, functional capabilities and information flows
99/645101DC 99/645101DC. ISO/IEC 15506. Information technology. Telecommunications and information exchange between systems. Private integrated services network (PISN). Inter-exchange signalling protocol. Message waiting indication supplementary service
PD IEC TR 60695-7-3:1998, IEC 60695-7-3:1998 PD IEC TR 60695-7-3:1998, IEC 60695-7-3:1998. Fire hazard testing. Toxicity of fire effluent. Use and interpretation of test results
BS CISPR 12:1997 BS CISPR 12:1997. Vehicles, motorboats and spark-ignited engine-driven devices. Radio disturbance characteristics. Limits and methods of measurement
BS 5202-10:1998, ISO 4389:1997 BS 5202-10:1998, ISO 4389:1997. Methods for chemical analysis of tobacco and tobacco products. Determination of organochlorine pesticide residues (gas chromatographic method)
99/200964DC 99/200964DC. IEC 61334-3-22. Distribution automation using distribution line carrier systems. Part 3-22. Mains signalling requirements. MV phase-to-earth and screen-to-earth coupling devices. Part 3-22 Mains signalling requirements - MV phase to earth and screen to earth coupling devices
99/621800DC 99/621800DC. Bundles for the perpetual preservation of electronic documents and associated objects
BS 4515-2:1999 BS 4515-2:1999. Specification for welding of steel pipelines on land and offshore. Duplex stainless steel pipelines
BS 7918-1:1999 BS 7918-1:1999. Visual imperfections in rubber products. Vocabulary
BS EN 60598-2-24:1999 BS EN 60598-2-24:1999. Luminaires. Particular requirements. Luminaires with limited surface temperatures
BS IEC 61745:1998 BS IEC 61745:1998. End-face image analysis procedure for the calibration of optical fibre geometry test sets
WD/HB10147 : 1999 WD/HB10147 : 1999. The Millennium Time Bomb. A practical guide to the technical and legal issues.
BS 4M 45-1:1998, ISO 3324-1:1997 BS 4M 45-1:1998, ISO 3324-1:1997. Aircraft tyres and rims. Specifications
BS ISO 4800:1998 BS ISO 4800:1998. Laboratory glassware. Separating funnels and dropping funnels
BS ISO 965-5:1998 BS ISO 965-5:1998. ISO general purpose metric screw threads. Tolerances. Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
BS ISO 965-4:1998 BS ISO 965-4:1998. ISO general purpose metric screw threads. Tolerances. Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
BS ISO 965-3:1998 BS ISO 965-3:1998. ISO general purpose metric screw threads. Tolerances. Deviations for constructional screw threads
BS ISO 965-2:1998 BS ISO 965-2:1998. ISO general purpose metric screw threads. Tolerances. Limits of sizes for general purpose external and internal screw threads. Medium quality
BS ISO 965-1:1998 BS ISO 965-1:1998. ISO general purpose metric screw threads. Tolerances. Principles and basic data
BS ISO 262:1998 BS ISO 262:1998. ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts
BS ISO 261:1998 BS ISO 261:1998. ISO general purpose metric screw threads. General plan
BS ISO 68-2:1998 BS ISO 68-2:1998. ISO general purpose screw threads. Basic profile. Inch screw threads
BS ISO 68-1:1998 BS ISO 68-1:1998. ISO general purpose screw threads. Basic profile. Metric screw threads
BS IEC 60050-551:1998 BS IEC 60050-551:1998. International electrotechnical vocabulary. Power electonics
BS IEC 60050-442:1998 BS IEC 60050-442:1998. International electrotechnical vocabulary. Electrical accessories
99/120324DC 99/120324DC. ISO/CD 15986. Plastics. Evaluation of compostibility. Test scheme for final acceptance
BS ISO/IEC 8802-5:1998 BS ISO/IEC 8802-5:1998. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Token ring access method and physical layer specifications
BS IEC 60050-821:1998 BS IEC 60050-821:1998. International electrotechnical vocabulary. Signalling and security apparatus for railways
BS IEC 60050-351:1998 BS IEC 60050-351:1998. International electrotechnical vocabulary. Automatic control
BS EN ISO 12737:1999 BS EN ISO 12737:1999. Metallic materials. Determination of plane-strain fracture toughness
BS EN 60947-1:1998 BS EN 60947-1:1998. Specification for low-voltage switchgear and controlgear. General rules
BS ISO 6196-4:1998 BS ISO 6196-4:1998. Micrographics. Vocabulary. Materials and packaging
BS ISO 3166-2:1998 BS ISO 3166-2:1998. Codes for the representation of names of countries and their subdivisions. Country subdivision code
99/702691DC 99/702691DC. Secure storage units. Requirements, classification and methods of test for resistance to burglary. Part 1. Safes, strongroom doors and strongrooms (prA1 EN 1143-1). Safes, strongroom doors and strongrooms
BS EN 61770:1999, IEC 61770:1998 BS EN 61770:1999, IEC 61770:1998. Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets
BS EN 61280-1-3:1999, IEC 61280-1-3:1998 BS EN 61280-1-3:1999, IEC 61280-1-3:1998. Fibre optic communication subsystem basic test procedures. Test procedures for general communication subsystems. Central wavelength and spectral width measurement
BS EN ISO 62:1999 BS EN ISO 62:1999. Plastics. Determination of water absorption
BS EN ISO 4157-3:1999 BS EN ISO 4157-3:1999. Construction drawings. Designation systems. Room identifiers
BS EN ISO 4157-2:1999 BS EN ISO 4157-2:1999. Construction drawings. Designation systems. Room names and numbers
BS IEC 81714-3:1998 BS IEC 81714-3:1998. Design of graphical symbols for use in the technical documentation of products. Classification of connect nodes, networks and their encoding
BS EN 61757-1:1999, IEC 61757-1:1998 BS EN 61757-1:1999, IEC 61757-1:1998. Fibre optic sensors. Generic specification
BS EN 61280-2-2:1999, IEC 61280-2-2:1998 BS EN 61280-2-2:1999, IEC 61280-2-2:1998. Fibre optic communication subsystem basic test procedures. Test procedures for digital systems. Optical eye pattern, waveform, and extinction ratio
BS EN ISO 14631:1999 BS EN ISO 14631:1999. Extruded sheets of impact-modified polystyrene (PS-I). Requirements and test methods
BS ISO 13556:1998 BS ISO 13556:1998. Road vehicles. Localization of exhaust system leaks and equipment specifications
BS IEC 60780:1998 BS IEC 60780:1998. Nuclear power plants. Electrical equipment of the safety system. Qualification
BS 3262-2:1999 BS 3262-2:1999. Hot-applied thermoplastic road marking materials. Specification for road performance
BS AU 242a:1998 BS AU 242a:1998. Automotive windscreen repair. Code of practice
99/703619DC 99/703619DC. EN 962:1996/AMD 1. Transportable gas cylinders. Valve protection caps and valve guards for industrial and medical gas cylinders. Design, construction and tests. Amendment No 1
BS ISO/TR 3666:1998 BS ISO/TR 3666:1998. Viscosity of water
99/701544DC 99/701544DC. EN 4442. Aerospace series. Clamps, loop, articulated, with body and woven fabric packing in corrosion resisting steel (prEN 4442)
99/200344DC 99/200344DC. IEC 60252:1993. A.C. motor capacitors (IEC document 33/299/CDV)
BS 6782-14:1999, ISO 13885-1:1998 BS 6782-14:1999, ISO 13885-1:1998. Binders for paints. Gel permeation chromatography (GPC) with tetrahydrofuran (THF) as eluent
BS EN ISO 14713:1999 BS EN ISO 14713:1999. Protection against corrosion of iron and steel in structures. Zinc and aluminium coatings. Guidelines
BS EN ISO 1461:1999 BS EN ISO 1461:1999. Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods
BS EN 848-2:1999 BS EN 848-2:1999. Safety of woodworking machines. One side moulding machines with rotating tool. Single spindle handfed/integrated fed routing machines
DD ENV 1927-2:1999 DD ENV 1927-2:1999. Qualitative classification of softwood round timber. Pines
BS EN 60512-11-8:1999, IEC 60512-11-8:1995 BS EN 60512-11-8:1999, IEC 60512-11-8:1995. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Climatic tests. Test 11h. Sand and dust
BS EN 60512-11-1:1999, IEC 60512-11-1:1995 BS EN 60512-11-1:1999, IEC 60512-11-1:1995. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Climatic tests. Test 11a. Climatic sequence
BS EN 61747-2:1999, IEC 61747-2:1998 BS EN 61747-2:1999, IEC 61747-2:1998. Liquid crystal and solid-state display devices. Liquid crystal display modules. Sectional specification
BS EN 60966-2-6:1999, IEC 60966-2-6:1998 BS EN 60966-2-6:1999, IEC 60966-2-6:1998. Radio frequency and coaxial cable assemblies. Detail specification for cable assemblies for TV and radio receivers. Frequency range 0 to 3000 MHz, IEC 60169-24 connectors
BS EN 60966-2-5:1999, IEC 60966-2-5:1998 BS EN 60966-2-5:1999, IEC 60966-2-5:1998. Radio frequency and coaxial cable assemblies. Detail specification for cable assemblies for TV and radio receivers. Frequency range 0 to 1000 MHz, IEC 60169-2 connectors
BS EN 60738-1-4:1999, IEC 60738-1-4:1998 BS EN 60738-1-4:1999, IEC 60738-1-4:1998. Thermistors. Directly heated positive step-function temperature coefficient. Blank detail specification. Sensing application. Assessment level EZ
BS EN 60738-1-3:1999, IEC 60738-1-3:1998 BS EN 60738-1-3:1999, IEC 60738-1-3:1998. Thermistors. Directly heated positive step-function temperature coefficient. Blank detail specification. Inrush current application. Assessment level EZ
BS EN 60738-1-2:1999, IEC 60738-1-2:1998 BS EN 60738-1-2:1999, IEC 60738-1-2:1998. Thermistors. Directly heated positive step-function temperature coefficient. Blank detail specification. Heating element application. Assessment level EZ
BS EN 60738-1-1:1999, IEC 60738-1-1:1998 BS EN 60738-1-1:1999, IEC 60738-1-1:1998. Thermistors. Directly heated positive step-function temperature coefficient. Blank detail specification. Current limiting application. Assessment level EZ
BS EN 60738-1:1999, IEC 60738-1:1998 BS EN 60738-1:1999, IEC 60738-1:1998. Thermistors. Directly heated positive step-function temperature coefficient. Generic specification
BS EN 60384-20-1:1999, IEC 60384-20-1:1996 BS EN 60384-20-1:1999, IEC 60384-20-1:1996. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors. Assessment level EZ
BS EN 60384-20:1999, IEC 60384-20:1996 BS EN 60384-20:1999, IEC 60384-20:1996. Fixed capacitors for use in electronic equipment. Sectional specification: fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors
BS EN ISO 15013:1999 BS EN ISO 15013:1999. Extruded sheets of polypropylene (PP). Requirements and test methods
99/120116DC 99/120116DC. Hard coal. Determination of mineral matter (ISO/CD 602)
PD CR 13426:1999, CR 13426:1998 PD CR 13426:1999, CR 13426:1998. Biotechnology. Microorganisms. Report on the criteria used to classify Group 1 genetically modified microorganisms
PD ISO/TR 10014:1998 PD ISO/TR 10014:1998. Guidelines for managing the economics of quality
BS A 343:1999, ISO 9140:1998 BS A 343:1999, ISO 9140:1998. Nuts, plain or slotted (castellated). Test methods
BS A 342:1999, ISO 9139:1998 BS A 342:1999, ISO 9139:1998. Nuts, plain or slotted (castellated). Procurement specification
BS EN 61857-21:1999, IEC 61857-21:1998 BS EN 61857-21:1999, IEC 61857-21:1998. Electrical insulation systems. Procedures for thermal evaluation. Specific requirements for general-purpose model. Wire-wound applications
BS EN 61857-1:1999, IEC 61857-1:1998 BS EN 61857-1:1999, IEC 61857-1:1998. Electrical insulation systems. Procedures for thermal evaluation. General requirements. Low-voltage
BS EN 60335-2-87:1999, IEC 60335-2-87:1998 BS EN 60335-2-87:1999, IEC 60335-2-87:1998. Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for electric animal-stunning equipment
BS EN 60704-2-11:1999, IEC 60704-2-11:1998 BS EN 60704-2-11:1999, IEC 60704-2-11:1998. Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirements. Electrically operated food preparation appliances
BS EN ISO 14632:1999 BS EN ISO 14632:1999. Extruded sheets of polyethylene (PE-HD). Requirements and test methods
BS IEC 60747-12-1:1995, QC 720101:1995 BS IEC 60747-12-1:1995, QC 720101:1995. Discrete semiconductor devices and integrated circuits. Blank detail specification for light emitting/infrared emitting diodes with/without pigtail for fibre optic systems and sub-systems
BS ISO 6394:1998 BS ISO 6394:1998. Acoustics. Measurement at the operator's position of noise emitted by earth-moving machinery. Stationary test conditions
BS ISO 6393:1998 BS ISO 6393:1998. Acoustics. Measurement of exterior noise emitted by earth-moving machinery. Stationary test conditions
BS IEC 60034-17:1998 BS IEC 60034-17:1998. Rotating electrical machines. Cage induction motors when fed from converters. Application guide
99/402041DC 99/402041DC. Geophysical logging of boreholes for hydrogeological purposes (ISO 14685)
99/200415DC 99/200415DC. IEC 61892-1. Mobile and fixed offshore units. Electrical installations. Part 1. General requirements and conditions (IEC document 18/863/CD)
BS 7929:1999 BS 7929:1999. Guide for the verification of a pump casing design procedure
99/560127DC 99/560127DC. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Part 2. Methods of test. Section 2.2. Odour and flavour of water. Subsection 2.2.3. Method of testing odours and flavours imparted to water by hoses for conveying water for food and drink preparation. Part 2: Methods of test. Section 2.2: Taste of water Sub-section 2.2.3: Method of testing tastes imparted to water by hoses for conveying water for food and drink preparation
99/560125DC 99/560125DC. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Part 2. Methods of test. Section 2.2. Odour and flavour of water. Subsection 2.2.1. General method of test. Part 2: Methods of test. Section 2.2: Taste of water Sub-section 2.2.1: General method of test
99/560124DC 99/560124DC. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Part 2. Methods of test. Section 2.1. Samples for testing. Part 2: Methods of test. Section 2.1: Samples for testing
99/560123DC 99/560123DC. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Part 1. Specification. Part 1: Specification
WD/99/120091DC WD/99/120091DC. prEN 13413. Resilient floor coverings. Polyvinylchloride floor coverings on mineral fibre backing. Specification
BS EN ISO 14184-1:1999 BS EN ISO 14184-1:1999. Textiles. Determination of formaldehyde. Free and hydrolyzed formaldehyde (water extraction method)
PD 6644-2:1999, ISO/IEC Guide 43-2:1997 PD 6644-2:1999, ISO/IEC Guide 43-2:1997. Proficiency testing by interlaboratory comparisons. Selection and use of proficiency testing schemes by laboratory accreditation bodies
PD 6644-1:1999, ISO/IEC Guide 43-1:1997 PD 6644-1:1999, ISO/IEC Guide 43-1:1997. Proficiency testing by interlaboratory comparisons. Development and operation of proficiency testing schemes
BS EN 299:1999 BS EN 299:1999. Oil pressure atomizing nozzles. Determination of the angle and spray characteristics
99/240109DC 99/240109DC. Amendment 1 to IEC 60794-1-1:Annex D (IEC document 86A/475/CDV). Generic Specification -. Amendment 1 to IEC 60794-1-1 - Annex D
BS EN 752-7:1998 BS EN 752-7:1998. Drain and sewer systems outside buildings. Maintenance and operations
BS EN ISO 11348-1:1999 BS EN ISO 11348-1:1999. Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Method using freshly prepared bacteria
BS EN ISO 11348-3:1999 BS EN ISO 11348-3:1999. Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Method using freeze-dried bacteria
BS EN ISO 11348-2:1999 BS EN ISO 11348-2:1999. Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Method using liquid-dried bacteria
BS EN ISO 5353:1999, BS 6912-27:1998 BS EN ISO 5353:1999, BS 6912-27:1998. Earth-moving machinery, and tractors and machinery for agriculture and forestry. Seat index point
BS EN ISO 8230:1998 BS EN ISO 8230:1998. Safety requirements for dry-cleaning machines using perchloroethylene
BS 4193-13:1998, ISO 6987:1998 BS 4193-13:1998, ISO 6987:1998. Hardmetal insert tooling. Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole. Dimensions
BSEN50085-1 : 1999 BSEN50085-1 : 1999.
BS EN ISO 9876:1999 BS EN ISO 9876:1999. Ships and marine technology. Marine facsimile receivers for meteorological charts
BS EN ISO 8729:1999 BS EN ISO 8729:1999. Ships and marine technology. Marine radar reflectors
BS EN ISO 8728:1999 BS EN ISO 8728:1999. Ships and marine technology. Marine gyro-compasses
98/126150DC 98/126150DC. Rubber, vulcanized and thermoplastic. Performed gaskets used in buildings. Classification, specifications for materials and test methods for gaskets (ISO/DIS 3934)
BS EN ISO 10545-7:1999 BS EN ISO 10545-7:1999. Ceramic tiles. Determination of resistance to surface abrasion for glazed tiles
PD 6635:1999 PD 6635:1999. Non-alloy steel rod for drawing and/or cold rolling. General purpose rod, rimmed and rimmed substitute low carbon steel rod, rod for special applications. Requirements and tests
BS EN 60335-2-17:1999, IEC 60335-2-17:1998 BS EN 60335-2-17:1999, IEC 60335-2-17:1998. Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for blankets, pads and similar flexible heating appliances
BS EN 10222-3:1999 BS EN 10222-3:1999. Steel forgings for pressure purposes. Nickel steels with specified low-temperature properties
BS EN 61620:1999, IEC 61620:1998 BS EN 61620:1999, IEC 61620:1998. Insulating liquids. Determination of the dielectric dissipation factor by measurement of the conductance and capacitance. Test method
98/654393DC 98/654393DC. ISO/IEC 13818-1/PDAM 7. Information technology. Generic coding of moving pictures and associated audio information. Systems. Amendment 7. Transport of ISO/IEC 14496 data over ISO/IEC 13818-1. Transportation of ISO/IEC 14992 data over ISO/IEC 13818-1
BS 2782-4:Method 470B:1999, ISO 3451-2:1998 BS 2782-4:Method 470B:1999, ISO 3451-2:1998. Methods of testing plastics. Chemical properties. Determination of ash of polyalkylene terephthalates
BS ISO/IEC 10118-4:1998 BS ISO/IEC 10118-4:1998. Information technology. Security techniques. Hash-functions. Hash-functions using modular arithmetic
BS ISO/IEC 14888-1:1998 BS ISO/IEC 14888-1:1998. Information technology. Security techniques. Digital signatures with appendix. General
BS A 344:1999, ISO 3191:1998 BS A 344:1999, ISO 3191:1998. Nuts, anchor, self-locking, fixed, single lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperatures)/235°C, 1100 MPa (at ambient temperature)/315°C, 1100 MPa (at ambient temperature)/425°C. Dimensions
DD ENV 1300:1999 DD ENV 1300:1999. Secure storage units. Classification for high security locks according to their resistance to unauthorized opening
BS EN ISO 11215:1998 BS EN ISO 11215:1998. Modified starch. Determination of adipic acid content of acetylated di-starch adipates. Gas-chromatographic method
WD/BSEN60738-1-4 : 1999, IEC 60738-1-4:1998 WD/BSEN60738-1-4 : 1999, IEC 60738-1-4:1998.
WD/BSEN60738-1-3 : 1999, IEC 60738-1-3:1998 WD/BSEN60738-1-3 : 1999, IEC 60738-1-3:1998.
WD/BSEN60738-1-2 : 1999, IEC 60738-1-2:1998 WD/BSEN60738-1-2 : 1999, IEC 60738-1-2:1998.
WD/BSEN60738-1-1 : 1999, IEC 60738-1-1:1998 WD/BSEN60738-1-1 : 1999, IEC 60738-1-1:1998.
BS EN 166101:1999 BS EN 166101:1999. Harmonized system of quality assessment for electronic components. Blank detail specification: surface acoustic wave (SAW) filters. Capability approval
WD/BSEN60738-1 : 1999, IEC 60738-1:1998 WD/BSEN60738-1 : 1999, IEC 60738-1:1998.
WD/BSEN60384-20-1 : 1999, IEC 60384-20-1:1996 WD/BSEN60384-20-1 : 1999, IEC 60384-20-1:1996.
BSEN60384-20 : 1999, IEC 60384-20:1996 BSEN60384-20 : 1999, IEC 60384-20:1996.
98/718777DC 98/718777DC. Two-wheeled mopeds. Antilock braking systems (ABS). Tests and measurement methods (ISO/DIS 12366)
BS EN 1096-1:1999 BS EN 1096-1:1999. Glass in building. Coated glass. Definitions and classification
PD CR 1752:1999 PD CR 1752:1999. Ventilation for buildings. Design criteria for the indoor environment
BS EN ISO 780:1999 BS EN ISO 780:1999. Packaging. Pictorial marking for handling of goods
BS AU 50-3.1b:1999, ISO 9413:1998 BS AU 50-3.1b:1999, ISO 9413:1998. Tyres and wheels. Valves. Specification for valve dimensions and designation
PD ES 59005:1999 PD ES 59005:1999. Considerations for the evaluation of human exposure to electromagnetic fields (EMFs) from mobile telecommunication equipment (MTE) in the frequency range 30 MHz - 6 GHz
BS ISO 9988-1:1998 BS ISO 9988-1:1998. Plastics. Polyoxymethylene (POM) moulding and extrusion materials. Designation system and basis for specifications
BS EN 60684-3-213:1999, IEC 60684-3-213:1998 BS EN 60684-3-213:1999, IEC 60684-3-213:1998. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 2:1. Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 2:1
BS EN 61868:1999, IEC 61868:1998 BS EN 61868:1999, IEC 61868:1998. Mineral insulating oils. Determination of kinematic viscosity at very low temperatures
BS EN ISO 10472-4:1998 BS EN ISO 10472-4:1998. Safety requirements for industrial laundry machinery. Air dryers
BS EN 1164:1999 BS EN 1164:1999. Feather and down. Test methods. Determination of the turbidity of an aqueous extract
98/718667DC 98/718667DC. Hexalobular socket countersunk head tapping screws (common head style) (ISO/CD 14586)
98/652618DC 98/652618DC. ISO/IEC FCD 9798-4. Information technology. Security techniques. Entity authentication. Part 4. Mechanisms using a cryptographic check function. Mechanisms using a cryptographic check function
BS EN 61196-3:1999, IEC 61196-3:1998 BS EN 61196-3:1999, IEC 61196-3:1998. Radio-frequency cables. Specifications. Sectional specification for coaxial cables for local area networks
BS EN ISO 12543-6:1998 BS EN ISO 12543-6:1998. Glass in building. Laminated glass and laminated safety glass. Appearance
BS EN ISO 12543-5:1998 BS EN ISO 12543-5:1998. Glass in building. Laminated glass and laminated safety glass. Dimensions and edge finishing
BS EN ISO 12543-4:1998 BS EN ISO 12543-4:1998. Glass in building. Laminated glass and laminated safety glass. Test methods for durability
BS EN ISO 12543-3:1998 BS EN ISO 12543-3:1998. Glass in building. Laminated glass and laminated safety glass. Laminated glass
BS EN ISO 12543-1:1998 BS EN ISO 12543-1:1998. Glass in building. Laminated glass and laminated safety glass. Definitions and description of component parts
BS EN 1253-2:1999 BS EN 1253-2:1999. Gullies for buildings. Test methods
BS EN 1985:1999 BS EN 1985:1999. Walking aids. General requirements and test methods
BS A 340:1999, ISO 9156:1998 BS A 340:1999, ISO 9156:1998. Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS EN 60633:1999, IEC 60633:1998 BS EN 60633:1999, IEC 60633:1998. Terminology for high-voltage direct current (HVDC) transmission
PD 6642:1999, ISO/IEC TR 17010:1998 PD 6642:1999, ISO/IEC TR 17010:1998. General requirements for bodies providing accreditation of inspection bodies
BS A 339:1999, ISO 7332:1998 BS A 339:1999, ISO 7332:1998. Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 338:1999, ISO 3225:1998 BS A 338:1999, ISO 3225:1998. Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 337:1999, ISO 3224:1998 BS A 337:1999, ISO 3224:1998. Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 336:1999, ISO 3223:1998 BS A 336:1999, ISO 3223:1998. Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 335:1999, ISO 3222:1998 BS A 335:1999, ISO 3222:1998. Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 334:1999, ISO 3221:1998 BS A 334:1999, ISO 3221:1998. Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 333:1999, ISO 3209:1998 BS A 333:1999, ISO 3209:1998. Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS EN 1523:1999 BS EN 1523:1999. Windows, doors, shutters and blinds. Bullet resistance. Test method
BS EN 1522:1999 BS EN 1522:1999. Windows, doors, shutters and blinds. Bullet resistance. Requirements and classification
BS 4193-18:1999, ISO 5609:1998 BS 4193-18:1999, ISO 5609:1998. Hardmetal insert tooling. Specification for dimensions of boring bars for indexable inserts
BS EN 1724:1999 BS EN 1724:1999. Light conveyor belts. Test method for the determination of the coefficient of friction
BS EN 1776:1999 BS EN 1776:1999. Gas supply. Natural gas measuring stations. Functional requirements
BSEN61747-2 : 1999, IEC 61747-2:1998 BSEN61747-2 : 1999, IEC 61747-2:1998.
WD/BSEN60966-2-6 : 1999, IEC 60966-2-6:1998 WD/BSEN60966-2-6 : 1999, IEC 60966-2-6:1998.
WD/BSEN60966-2-5 : 1999, IEC 60966-2-5:1998 WD/BSEN60966-2-5 : 1999, IEC 60966-2-5:1998.
BSEN60512-11-8 : 1999, IEC 60512-11-8:1995 BSEN60512-11-8 : 1999, IEC 60512-11-8:1995.
BSEN60512-11-1 : 1999, IEC 60512-11-1:1995 BSEN60512-11-1 : 1999, IEC 60512-11-1:1995. . Test 11a. Climatic sequence
BS EN 60936-2:1999, IEC 60936-2:1998 BS EN 60936-2:1999, IEC 60936-2:1998. Maritime navigation and radiocommunication equipment and systems. Radar. Shipborne radar for high speed craft (HSC). Methods of testing and required test results
BS ISO 9239-1:1997 BS ISO 9239-1:1997. Reaction to fire tests. Horizontal surface spread of flame on floor-covering systems. Flame spread using a radiant heat ignition source
BS ISO 11925-2:1997 BS ISO 11925-2:1997. Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame. Single flame source test
BS ISO 11925-3:1997 BS ISO 11925-3:1997. Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame. Multi-source test
98/654324DC 98/654324DC. ISO/IEC CD 14492:1998. Information technology. Coded representation of picture and audio information. Lossy/lossless coding of bi-level images
98/652609DC 98/652609DC. ISO/IEC FCD 9796-4. Information technology. Security techniques. Digital signature schemes giving message recovery. Part 4. Discrete logarithm base mechanisms. Discrete logarithm based mechanisms
98/233471DC 98/233471DC. IEC 61010-1. Ed.2. Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements (IEC document 66/212/CDV). General requirements
98/717919DC 98/717919DC. Ships and marine technology. Shipboard plans for fire protection, life-saving appliances, and means of escape. Arrangement (ISO/CD 17631)
98/564916DC 98/564916DC. ISO 14708-1. Implants for surgery. Active implantable medical devices. Part 1. General requirements for safety, marking and information to be provided by the manufacturer. Part 1: General requirements for safety, marking and information to be provided by the manufacturer
BS ISO/IEC 10026-2:1998 BS ISO/IEC 10026-2:1998. Information technology. Open systems interconnection. Distributed transaction processing. OSI TP service
BS ISO/IEC 10026-1:1998 BS ISO/IEC 10026-1:1998. Information technology. Open systems interconnection. Distributed transaction processing. OSI TP model
BS ISO/IEC 11572:1997 BS ISO/IEC 11572:1997. Information technology. Telecommunication and information exchange between systems. Private integrated services network. Circuit mode bearer services. Inter-exchange signalling procedures and protocol
BS ISO/IEC 9804:1998 BS ISO/IEC 9804:1998. Information technology. Open systems interconnection. Service definition for the commitment, concurrency and recovery service element
BS ISO/IEC 9805-1:1998 BS ISO/IEC 9805-1:1998. Information technology. Open systems interconnection. Protocol for the commitment, concurrency and recovery service element. Protocol specification
BS ISO/IEC 11571:1998 BS ISO/IEC 11571:1998. Information technology. Telecommunications and information exchange between systems. Private integrated services networks. Addressing
BS ISO/IEC 15991:1998 BS ISO/IEC 15991:1998. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Specification, functional model and information flows. Call priority interruption and call priority interruption protection supplementary services
BS ISO/IEC 15992:1998 BS ISO/IEC 15992:1998. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Inter-exchange signalling protocol. Call priority interruption and call priority interruption protection supplementary services
DD ENV 1156:1999 DD ENV 1156:1999. Wood-based panels. Determination of duration of load and creep factors
DD ENV 717-1:1999 DD ENV 717-1:1999. Wood-based panels. Determination of formaldehyde release. Formaldehyde emission by the chamber method
BS EN ISO 11554:1999 BS EN ISO 11554:1999. Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
BS EN ISO 2867:1999, BS 6912-15:1999 BS EN ISO 2867:1999, BS 6912-15:1999. Earth-moving machinery. Access systems
BS IEC 61000-3-4:1998 BS IEC 61000-3-4:1998. Electromagnetic compatibility (EMC). Limits. Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A
BS EN 50250:1999 BS EN 50250:1999. Conversion adaptors for industrial use
BS EN 1150:1999 BS EN 1150:1999. Protective clothing. Visibility clothing for non-professional use. Test methods and requirements
BS 1722-7:1999 BS 1722-7:1999. Fences. Specification for wooden post and rail fences
BS EN 1094-2:1999 BS EN 1094-2:1999. Insulating refractory products. Classification of shaped products
BS ISO 11813:1998 BS ISO 11813:1998. Milk and milk products. Determination of zinc content. Flame atomic absorption spectrometric method
BS ISO 12081:1998 BS ISO 12081:1998. Milk. Determination of calcium content. Titrimetric method
BS 5766-16:1999, ISO 14718:1998 BS 5766-16:1999, ISO 14718:1998. Methods for analysis of animal feeding stuffs. Determination of aflatoxin B1 content of mixed feeding stuffs (high-performance liquid chromatographic method)
BS 4317-3:1999, ISO 712:1998 BS 4317-3:1999, ISO 712:1998. Methods of test for cereals and pulses. Determination of moisture content of cereals and cereal products (routine reference method)
BS 7822-2.1:1999, IEC 60664-2-1:1997 BS 7822-2.1:1999, IEC 60664-2-1:1997. Insulation coordination for equipment within low-voltage systems. Application guide. Dimensioning procedure worksheets and dimensioning examples

BIS Standards Catalogue