BIS Standards Catalogue

BS 2000-315:1998, ISO 5662:1997 BS 2000-315:1998, ISO 5662:1997. Methods of test for petroleum and its products. Petroleum products. Electrical insulating oils. Detection of corrosive sulfur
BS ISO 3548:1999 BS ISO 3548:1999. Plain bearings. Thin-walled half bearings with or without Flange. Tolerances, design features and methods of test
BS EN 1774:1997 BS EN 1774:1997. Zinc and zinc alloys. Alloys for foundry purposes. Ingot and liquid
BS EN ISO 15212-1:1999 BS EN ISO 15212-1:1999. Oscillation-type density meters. Laboratory instruments
BS ISO 15022-2:1999 BS ISO 15022-2:1999. Securities. Scheme for messages (data field dictionary). Maintenance of the data field dictionary and catalogue of messages
BS ISO 15022-1:1999 BS ISO 15022-1:1999. Securities. Scheme for messages (data field dictionary). Data field and message design rules and guidelines
BS EN 12077-2:1998+A1:2008 BS EN 12077-2:1998+A1:2008. Cranes safety. Requirements for health and safety. Limiting and indicating devices
BS EN ISO 13807:2009 BS EN ISO 13807:2009. Vitreous and porcelain enamels. Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry
BS EN ISO 13805:2009 BS EN ISO 13805:2009. Vitreous and porcelain enamels for aluminium. Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
BS EN ISO 4528:2009 BS EN ISO 4528:2009. Vitreous and porcelain enamel finishes. Selection of test methods for vitreous and porcelain enamelled areas of articles
BS EN ISO 13350:2008, BS 848-10:1999 BS EN ISO 13350:2008, BS 848-10:1999. Industrial fans. Performance testing of jet fans
BS EN ISO 13349:2008, BS 848-8:1999 BS EN ISO 13349:2008, BS 848-8:1999. Fans for general purposes. Vocabulary and definition of categories
BS EN 1295-1:1997 BS EN 1295-1:1997. Structural design of buried pipelines under various conditions of loading. General requirements
BS ISO/TR 9464:1998 BS ISO/TR 9464:1998. Guide to the use of ISO 5167-1:1991
BS EN 953:1997+A1:2009 BS EN 953:1997+A1:2009. Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
BS EN 12942:1998+A2:2008 BS EN 12942:1998+A2:2008. Respiratory protective devices. Power assisted filtering devices incorporating full face masks, half masks or quarter masks. Requirements, testing, marking
BS EN 12941:1998+A2:2008 BS EN 12941:1998+A2:2008. Respiratory protective devices. Powered filtering devices incorporating a helmet or a hood. Requirements, testing, marking
BS 6920-2.2.1:2000+A2:2008 BS 6920-2.2.1:2000+A2:2008. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test. Odour and flavour of water. General method of test
BS 6920-2-1:2000+A3:2008 BS 6920-2-1:2000+A3:2008. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test. Samples for testing
BS EN 12547:1999+A1:2009 BS EN 12547:1999+A1:2009. Centrifuges. Common safety requirements
BS EN 12549:1999+A1:2008 BS EN 12549:1999+A1:2008. Acoustics. Noise test code for fastener driving tools. Engineering method
BS EN 877:1999+A1:2006 BS EN 877:1999+A1:2006. Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance
BS 5930:1999 BS 5930:1999. Code of practice for site investigations
BS EN 1493:1999+A1:2008 BS EN 1493:1999+A1:2008. Vehicle lifts
BS EN 1526:1997+A1:2008 BS EN 1526:1997+A1:2008. Safety of industrial trucks. Additional requirements for automated functions on trucks
BS EN 999:1998+A1:2008 BS EN 999:1998+A1:2008. Safety of machinery. The positioning of protective equipment in respect of approach speeds of parts of the human body
BS EN 1093-9:1998+A1:2008 BS EN 1093-9:1998+A1:2008. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Pollutant concentration parameter, room method
BS EN 1093-8:1998+A1:2008 BS EN 1093-8:1998+A1:2008. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Pollutant concentration parameter, test bench method
BS EN 1093-7:1998+A1:2008 BS EN 1093-7:1998+A1:2008. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Separation efficiency by mass, ducted outlet
BS EN 1093-6:1998+A1:2008 BS EN 1093-6:1998+A1:2008. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Separation efficiency by mass, unducted outlet
BS EN 1114-2:1998+A1:2008 BS EN 1114-2:1998+A1:2008. Plastics and rubber machines. Extruders and extrusion lines . Safety requirements for die face pelletisers
BS EN ISO 2320:1998 BS EN ISO 2320:1998. Prevailing torque type steel hexagon nuts. Mechanical and performance properties
BS EN 12644-2:2000+A1:2008 BS EN 12644-2:2000+A1:2008. Cranes. Information for use and testing. Marking
BS EN 286-1:1998+A2:2005 BS EN 286-1:1998+A2:2005. Simple unfired pressure vessels designed to contain air or nitrogen. Pressure vessels for general purposes
BS EN 61770:1999+A2:2006, IEC 61770:1998 BS EN 61770:1999+A2:2006, IEC 61770:1998. Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets
BS EN ISO 11782-2:2008 BS EN ISO 11782-2:2008. Corrosion of metals and alloys. Corrosion fatigue testing. Crack propagation testing using precracked specimens
BS EN ISO 11782-1:2008 BS EN ISO 11782-1:2008. Corrosion of metals and alloys. Corrosion fatigue testing. Cycles to failure testing
BS ISO 1100-2:1998 BS ISO 1100-2:1998. Measurement of liquid flow in open channels. Determination of the stage-discharge relation
BS EN 50122-1:1998 BS EN 50122-1:1998. Railway applications. Fixed installations. Protective provisions relating to electrical safety and earthing
BS EN 673:1998 BS EN 673:1998. Glass in building. Determination of thermal transmittance (U value). Calculation method
BS EN 60599:1999, IEC 60599:1999 BS EN 60599:1999, IEC 60599:1999. Mineral oil-impregnated electrical equipment in service. Guide to the interpretation of dissolved and free gases analysis
BS EN 12254:1998+A2:2008 BS EN 12254:1998+A2:2008. Screens for laser working places. Safety requirements and testing
BS EN 60700-1:1998+A2:2008, IEC 60700-1:1998 BS EN 60700-1:1998+A2:2008, IEC 60700-1:1998. Thyristor valves for high-voltage direct current (HVDC) power transmission. Electrical testing
BS EN ISO 11542-2:1998 BS EN ISO 11542-2:1998. Plastics. Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN 1457:1999 BS EN 1457:1999. Chimneys. Clay/ceramic flue liners. Requirements and test methods
BS EN 1811:1998+A1:2008 BS EN 1811:1998+A1:2008. Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin
BS EN 50144-1:1999 BS EN 50144-1:1999. Safety of hand-held electric motor operated tools. General requirements
BS 6SP 4:2000 BS 6SP 4:2000. Pins headed, plain shank, drilled, steel alloy and corrosion resisting steel with a strength class 880/1080 MPa
BS EN ISO 14683:1999 BS EN ISO 14683:1999. Thermal bridges in building construction. Linear thermal transmittance. Simplified methods and default values
BS EN 1662:1998 BS EN 1662:1998. Hexagon bolts with flange. Small series
BS EN 55024:1998+A2:2003, CISPR 24:1997 BS EN 55024:1998+A2:2003, CISPR 24:1997. Information technology equipment. Immunity characteristics. Limits and methods of measurement
BS EN ISO 7784-3:2006, BS 3900-E16:2000 BS EN ISO 7784-3:2006, BS 3900-E16:2000. Paints and varnishes. Determination of resistance to abrasion. Reciprocating test panel method
PAS 24-1:1999 PAS 24-1:1999. Enhanced security performance requirements for door assemblies. Single and double leaf, hinged external door assemblies to dwellings
BS EN 55022:1998, CISPR 22:1997 BS EN 55022:1998, CISPR 22:1997. Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
BS EN ISO 2884-1:2006, BS 3900-A7-1:2006 BS EN ISO 2884-1:2006, BS 3900-A7-1:2006. Paints and varnishes. Determination of viscosity using rotary viscometers. Cone-and-plate viscometer operated at a high rate of shear
BS ISO 15072:1999 BS ISO 15072:1999. Hexagon bolts with flange with metric fine pitch thread. Small series. Product grade A
BS EN 54-2:1998 BS EN 54-2:1998. Fire detection and fire alarm systems. Control and indicating equipment
BS EN 50126-1:1999 BS EN 50126-1:1999. Railway applications. The specification and demonstration of reliability, availability, maintainability and safety (RAMS). Basic requirements and generic process
BS EN 1251-2:2000 BS EN 1251-2:2000. Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1000 litres volume. Design, fabrication, inspection and testing
BS EN 26:1998 BS EN 26:1998. Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
BS ISO/TR 10064-4:1998 BS ISO/TR 10064-4:1998. Code of inspection practice. Recommendations relative to surface texture and tooth contact pattern checking
BS 4875-8:1998 BS 4875-8:1998. Furniture. Strength and stability of furniture. Methods for determination of stability of non-domestic storage furniture
BS 4N 100-1:1999 BS 4N 100-1:1999. Aircraft oxygen systems and equipment. Design and installation
BS ISO 16028:1999 BS ISO 16028:1999. Hydraulic fluid power. Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar). Specifications
BS EN 60938-2:2000, IEC 60938-2:1999 BS EN 60938-2:2000, IEC 60938-2:1999. Fixed inductors for electromagnetic interference suppression. Sectional specification
BS EN 60669-1:2000+A2:2008, BS 3676-1:2000 BS EN 60669-1:2000+A2:2008, BS 3676-1:2000. Switches for household and similar fixed-electrical installations. General requirements
BS EN 1463-2:2000 BS EN 1463-2:2000. Road marking materials. Retroreflecting road studs. Road test performance specifications
BS EN 250:2000 BS EN 250:2000. Respiratory equipment. Open-circuit self-contained compressed air diving apparatus. Requirements, testing, marking
BS EN 12431:1998 BS EN 12431:1998. Thermal insulating products for building applications. Determination of thickness for floating floor insulating products
BS EN 12430:1998 BS EN 12430:1998. Thermal insulating products for building applications. Determination of behaviour under point load
BS EN 60938-1:2000, IEC 60938-1:1999 BS EN 60938-1:2000, IEC 60938-1:1999. Fixed inductors for electromagnetic interference suppression. Generic specification
BS EN 12548:1999 BS EN 12548:1999. Lead and alloys. Lead alloy ingots for electric cable sheathing and for sleeves
BS EN 60730-2-18:1999, IEC 60730-2-18:1997 BS EN 60730-2-18:1999, IEC 60730-2-18:1997. Automatic electrical controls for household and similar use. Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements
BS 5950-5:1998 BS 5950-5:1998. Structural use of steelwork in building. Code of practice for design of cold formed thin gauge sections
BS EN 1515-1:2000 BS EN 1515-1:2000. Flanges and their joints. Bolting. Selection of bolting
BS EN ISO 3928:2006 BS EN ISO 3928:2006. Sintered metal materials, excluding hardmetals. Fatigue test pieces
BS EN 61580-4:1998, IEC 61580-4:1997 BS EN 61580-4:1998, IEC 61580-4:1997. Methods of measurement for waveguides. Attenuation of waveguide and waveguide assemblies
BS EN ISO 12956:1999 BS EN ISO 12956:1999. Geotextiles and geotextile-related products. Determination of the characteristic opening size
BS EN ISO 10283:2006 BS EN ISO 10283:2006. Binders for paints. Determination of monomeric diisocyanates in polyisocyanate resins
BS EN ISO 14910-2:2006 BS EN ISO 14910-2:2006. Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Preparation of test specimens and determination of properties
BS EN ISO 14910-1:2006 BS EN ISO 14910-1:2006. Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Designation system and basis for specifications
BS EN ISO 8442-2:1998 BS EN ISO 8442-2:1998. Materials and articles in contact with foodstuffs. Cutlery and table holloware. Requirements for stainless steel and silver-plated cutlery
BS EN 1859:2000 BS EN 1859:2000. Chimneys. Metal chimneys. Test methods
BS EN ISO 6888-1:1999 BS EN ISO 6888-1:1999. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species). Technique using Baird-Parker agar medium
BS EN ISO 13468-2:2006 BS EN ISO 13468-2:2006. Plastics. Determination of the total luminous transmittance of transparent materials. Double-beam instrument
BS EN 303-3:1999 BS EN 303-3:1999. Heating boilers. Gas-fired central heating boilers. Assembly comprising a boiler body and a forced draught burner
BS EN ISO 12958:1999 BS EN ISO 12958:1999. Geotextiles and geotextile-related products. Determination of water flow capacity in their plane
BS EN 61340-5-1:2001 BS EN 61340-5-1:2001. Electrostatics. Protection of electronic devices from electrostatic phenomena. General requirements
BS EN ISO 13431:1999 BS EN ISO 13431:1999. Geotextiles and geotextiles-related products. Determination of tensile creep and creep rupture behaviour
BS EN ISO 11979-2:2000 BS EN ISO 11979-2:2000. Ophthalmic implants. Intraocular lenses. Optical properties and test methods
BS EN ISO 11833-2:2006 BS EN ISO 11833-2:2006. Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics. Sheets of thickness less than 1 mm
BS ISO 13216-1:1999 BS ISO 13216-1:1999. Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems. Seat bight anchorages and attachments
BS EN ISO 12947-4:1998 BS EN ISO 12947-4:1998. Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Assessment of appearance change
BS EN ISO 12947-3:1998 BS EN ISO 12947-3:1998. Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Determination of mass loss
BS EN ISO 12947-2:1998 BS EN ISO 12947-2:1998. Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Determination of specimen breakdown
BS EN ISO 12947-1:1998 BS EN ISO 12947-1:1998. Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Martindale abrasion testing apparatus
BS EN 12259-1:1999 BS EN 12259-1:1999. Fixed firefighting systems. Components for sprinkler and water spray systems. Sprinklers
PAS 23-1:1999 PAS 23-1:1999. General performance requirements for door assemblies. Single leaf, external door assemblies to dwellings
BS EN 62019:1999, IEC 62019:1999 BS EN 62019:1999, IEC 62019:1999. Electrical accessories. Circuit-breakers and similar equipment for household use. Auxiliary contact units
BS EN 60705:1999, IEC 60705:1999 BS EN 60705:1999, IEC 60705:1999. Household microwave ovens. Methods for measuring performance
BS EN 1015-11:1999 BS EN 1015-11:1999. Methods of test for mortar for masonry. Determination of flexural and compressive strength of hardened mortar
BS EN 1015-10:1999 BS EN 1015-10:1999. Methods of test for mortar for masonry. Determination of dry bulk density of hardened mortar
BS EN 1015-9:1999 BS EN 1015-9:1999. Methods of test for mortar for masonry. Determination of workable life and correction time of fresh mortar
BS EN 1015-6:1999 BS EN 1015-6:1999. Methods of test for mortar for masonry. Determination of bulk density of fresh mortar
BS EN 1015-3:1999 BS EN 1015-3:1999. Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by flow table)
BS EN 1015-2:1999 BS EN 1015-2:1999. Methods of test for mortar for masonry. Bulk sampling of mortars and preparation of test mortars
BS EN 1015-1:1999 BS EN 1015-1:1999. Methods of test for mortar for masonry. Determination of particle size distribution (by sieve analysis)
BS EN ISO 4507:2007 BS EN ISO 4507:2007. Sintered ferrous materials, carburized or carbonitrided. Determination and verification of case-hardening depth by a micro-hardness test
BS EN 81-2:1998 BS EN 81-2:1998. Safety rules for the construction and installation of lifts. Hydraulic lifts
BS EN 81-1:1998 BS EN 81-1:1998. Safety rules for the construction and installation of lifts. Electric lifts
BS ISO 9276-1:1998, ISO 9276-1:1998 BS ISO 9276-1:1998, ISO 9276-1:1998. Representation of results of particle size analysis. Graphical representation
BS EN 60609-2:1999 BS EN 60609-2:1999. Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump turbines. Evaluation in Pelton turbines
BS EN 12525:2000 BS EN 12525:2000. Agricultural machinery. Front loaders. Safety
BS ISO 6196-10:1999 BS ISO 6196-10:1999. Micrographics. Vocabulary. Index
BS EN ISO 12213-2:2005 BS EN ISO 12213-2:2005. Natural gas. Calculation of compression factors. Calculation using a molar-composition analysis
BS EN ISO 12213-1:2005 BS EN ISO 12213-1:2005. Natural gas. Calculation of compression factors. Introduction and guidelines
BS EN ISO 15310:2005 BS EN ISO 15310:2005. Reinforced plastics. Determination of the in-plane shear modulus by the plate twist method
BS ISO 3874:1997 BS ISO 3874:1997. Series 1 freight containers. Handling and securing
BS EN ISO 13690:2007 BS EN ISO 13690:2007. Cereals, pulses and milled products. Sampling of static batches
BS EN 60269-1:1999, IEC 60269-1:1998 BS EN 60269-1:1999, IEC 60269-1:1998. Low-voltage fuses. General requirements
BS EN 10084:1998 BS EN 10084:1998. Case hardening steels. Technical delivery conditions
BS EN 30-1-1:1998 BS EN 30-1-1:1998. Domestic cooking appliances burning gas. Safety. General
BS EN 1124-1:1999 BS EN 1124-1:1999. Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Requirements, testing, quality control
BS EN 60872-1:1999, IEC 60872-1:1998 BS EN 60872-1:1999, IEC 60872-1:1998. Maritime navigation and radiocommunication equipment and systems. Radarp lotting aids. Automatic radar plotting aids (ARPA). Methods of testing and required test results
BS EN 50021:1999 BS EN 50021:1999. Electrical apparatus for potentially explosive atmospheres. Type of prot ection "n"
BS EN 10243-2:1999 BS EN 10243-2:1999. Steel die forgings. Tolerances on dimensions. Upset forgings made on horizontal forging machines
BS EN 10243-1:1999 BS EN 10243-1:1999. Steel die forgings. Tolerances on dimensions. Drop and vertical press forgings
BS EN 60630:1999 BS EN 60630:1999. Maximum lamp outlines for incandescent lamps
BS EN 1097-2:1998 BS EN 1097-2:1998. Tests for mechanical and physical properties of aggregates. Methods for the determination of resistance to fragmentation
BS EN ISO 13686:2005 BS EN ISO 13686:2005. Natural gas. Quality designation
BS EN ISO 12213-3:2005 BS EN ISO 12213-3:2005. Natural gas. Calculation of compression factor. Calculation using physical properties
BS 2X 32:1998 BS 2X 32:1998. Specification for pre-treatment etch primer for aerospace purposes
BS EN 818-6:2000+A1:2008 BS EN 818-6:2000+A1:2008. Short link chain for lifting purposes. Safety. Chain slings. Specification for information for use and maintenance to be provided by the manufacturer
BS EN 818-5:1999+A1:2008 BS EN 818-5:1999+A1:2008. Short link chain for lifting purposes. Safety . Chain slings - Grade 4
BS EN 818-3:1999+A1:2008 BS EN 818-3:1999+A1:2008. Short link chain for lifting purposes. Safety. Medium tolerance chain for chain slings. Grade 4
BS 5839-8:1998 BS 5839-8:1998. Fire detection and fire alarm systems for buildings. Code of practice for the design, installation, commissioning, and maintenance of voice alarm systems
BS EN 10087:1999 BS EN 10087:1999. Free cutting steels. Technical delivery conditions for semi-finished products, hot rolled bars and rods
BS EN 12300:1999 BS EN 12300:1999. Cryogenic vessels. Cleanliness for cryogenic service
BS EN 60598-2-20:1998 BS EN 60598-2-20:1998. Luminaires. Particular requirements. Lighting chains
BS EN 772-9:1998 BS EN 772-9:1998. Methods of test for masonry units. Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
BS EN 772-2:1998 BS EN 772-2:1998. Methods of test for masonry units. Determination of percentage area of voids in masonry units (by paper indentation)
BS EN 60439-1:1999, IEC 60439-1:1999 BS EN 60439-1:1999, IEC 60439-1:1999. Low-voltage switchgear and controlgear assemblies. Type-tested and partially type-tested assemblies
BS EN 1123-1:1999 BS EN 1123-1:1999. Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems. Requirements, testing, quality control
BS EN ISO 15225:2000 BS EN ISO 15225:2000. Nomenclature. Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange
BS EN 509:2000 BS EN 509:2000. Decorative fuel-effect gas appliances
BS EN 61675-1:1998+A1:2008, IEC 61675-1:1998 BS EN 61675-1:1998+A1:2008, IEC 61675-1:1998. Radionuclide imaging devices. Characteristics and test conditions. Positron emission tomographs
BS EN 656:2000 BS EN 656:2000. Gas-fired central heating boilers. Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW
BS EN ISO 14593:2005, BS 6068-5.23:1999 BS EN ISO 14593:2005, BS 6068-5.23:1999. Water quality. Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium. Method by analysis of inorganic carbon in sealed vessels (CO2 headspace test)
BS 2X 34:1998 BS 2X 34:1998. Specification for two component polyurethane finish for aerospace purposes
BS 2X 33:1998 BS 2X 33:1998. Specification for two component epoxy primer for aerospace purposes
BS 6F 100:1998 BS 6F 100:1998. Procedure for inspection and testing of textiles for aerospace purposes
BS 4N 100-2:1999 BS 4N 100-2:1999. Aircraft oxygen systems and equipment. Tests for the compatibility of materials in the presence of oxygen
BS EN 60598-2-22:1998+A2:2008 BS EN 60598-2-22:1998+A2:2008. Luminaires. Particular requirements. Luminaires for emergency lighting
BS EN 50136-1-1:1998+A2:2008 BS EN 50136-1-1:1998+A2:2008. Alarm systems. Alarm transmission systems and equipment. General requirements for alarm transmission systems
BS EN ISO 13802:2006 BS EN ISO 13802:2006. Plastics. Verification of pendulum impact-testing machines. Charpy, Izod and tensile impact-testing
BS EN 1865:2000 BS EN 1865:2000. Specifications for stretchers and other patient handling equipment used in road ambulances
BS EN 10269:1999 BS EN 10269:1999. Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
BS EN 1459:1999 BS EN 1459:1999. Safety of industrial trucks. Self-propelled variable reach trucks
BS 6231:1998 BS 6231:1998. Specification for PVC-insulated cables for switchgear and controlgear wiring
BS EN 1:1998 BS EN 1:1998. Flued oil stoves with vaporizing burners
BS EN ISO 14851:2004 BS EN ISO 14851:2004. Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by measuring the oxygen demand in a closed respirometer
BS EN 60335-2-40:1998 BS EN 60335-2-40:1998. Specification for safety of household and similar electrical appliances. Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
BS EN 933-5:1998 BS EN 933-5:1998. Tests for geometrical properties of aggregates. Determination of percentage of crushed and broken surfaces in coarse aggregate particles
BS 7211:1998 BS 7211:1998. Electric cables. Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire
BS 4553-3:1998 BS 4553-3:1998. Specification for 600/1000 V single-phase split concentric electric cables. Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire
BS 4553-2:1998 BS 4553-2:1998. Specification for 600/1000 V single-phase split concentric electric cables. Cables having thermosetting insulation
BS 4553-1:1998 BS 4553-1:1998. Specification for 600/1000 V single-phase split concentric electric cables. Cables having PVC insulation
BS EN ISO 11126-9:2004, BS 7079-F9:2004 BS EN ISO 11126-9:2004, BS 7079-F9:2004. Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Staurolite
BS 6920-1:2000 BS 6920-1:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Specification
BS EN ISO 140-1:1998 BS EN ISO 140-1:1998. Acoustics. Measurement of sound insulation in buildings and of building elements. Requirements for laboratory test facilities with suppressed flanking transmission
BS EN 12259-2:1999 BS EN 12259-2:1999. Fixed firefighting systems. Components for sprinkler and water spray systems. Wet alarm valve assemblies
BS EN 71-4:1998+A3:2007 BS EN 71-4:1998+A3:2007. Safety of toys. Experimental sets for chemistry and related activities
BS EN 752-4:1998 BS EN 752-4:1998. Drain and sewer systems outside buildings. Hydraulic design and environmental considerations
BS EN 1359:1999 BS EN 1359:1999. Gas meters. Diaphragm gas meters
BS 6651:1999 BS 6651:1999. Code of practice for protection of structures against lightning
BS EN ISO 8502-10:2004, BS 7079-B10:2004 BS EN ISO 8502-10:2004, BS 7079-B10:2004. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Field method for the titrimetric determination of water-soluble chloride
BS EN 60317-0-2:1998, IEC 60317-0-2:1997 BS EN 60317-0-2:1998, IEC 60317-0-2:1997. Specification for particular types of winding wires. General requirements. Enamelled rectangular copper
BS EN 12814-3:2000 BS EN 12814-3:2000. Testing of welded joints of thermoplastics semi-finished products. Tensile creep test
BS EN 60603-2:1998, IEC 60603-2:1995,QC 010000XX0002:1995 BS EN 60603-2:1998, IEC 60603-2:1995,QC 010000XX0002:1995. Connectors for frequencies below 3 MHz for use with printed boards. Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
BS 5588-9:1999 BS 5588-9:1999. Fire precautions in the design, construction and use of buildings. Code of practice for ventilation and air conditioning ductwork
BS 5588-4:1998 BS 5588-4:1998. Fire precautions in the design, construction and use of buildings. Code of practice for smoke control using pressure differentials
BS EN 60309-1:1999, IEC 60309-1:1999 BS EN 60309-1:1999, IEC 60309-1:1999. Plugs, socket-outlets and couplers for industrial purposes. General requirements
BS 7870-2:1999 BS 7870-2:1999. LV and MV polymeric insulated cables for use by distribution and generation utilities. Methods of test
BS EN 1332-1:1999 BS EN 1332-1:1999. Identification card systems. Man-machine interface. Design principles for the user interface
BS EN 50241-1:1999 BS EN 50241-1:1999. Specification for open path apparatus for the detection of combustible or toxic gases and vapours. General requirements and test methods
BS EN 61628-2:1999 BS EN 61628-2:1999. Corrugated pressboard and presspaper for electrical purposes. Methods of test
BS EN 207:1999 BS EN 207:1999. Personal eye-protection. Filters and eye-protectors against laser radiation (laser eye-protectors)
BS EN ISO 9773:1999 BS EN ISO 9773:1999. Plastics. Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
BS EN 60317-0-3:1998, IEC 60317-0-3:1997 BS EN 60317-0-3:1998, IEC 60317-0-3:1997. Specifications for particular types of winding wires. General requirements. Enamelled round aluminium wire
BS EN 61558-2-5:1998, IEC 61558-2-5:1997 BS EN 61558-2-5:1998, IEC 61558-2-5:1997. Safety of power transformers, power supply units and similar. Particular requirements for shaver transformers and shaver supply units
KIT 6 KIT 6. Electromagnetic compatibility pack
BS EN 89:2000 BS EN 89:2000. Gas-fired storage water heaters for the production of domestic hot water
BS EN 1495:1998 BS EN 1495:1998. Lifting platforms. Mast climbing work platforms
BS EN 50160:2000 BS EN 50160:2000. Voltage characteristics of electricity supplied by public distribution systems
BS EN 12639:2000 BS EN 12639:2000. Liquid pumps and pump units. Noise test code. Grade 2 and grade 3 of accuracy
BS EN ISO 14419:1999 BS EN ISO 14419:1999. Textiles. Oil repellency. Hydrocarbon resistance test
BS EN ISO 14852:2004 BS EN ISO 14852:2004. Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by analysis of evolved carbon dioxide
BS EN ISO 7792-1:2004 BS EN ISO 7792-1:2004. Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 14855:2004 BS EN ISO 14855:2004. Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide
BS EN ISO 7792-2:2004 BS EN ISO 7792-2:2004. Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Preparation of test specimens and determination of properties
BIP 0053:2004 BIP 0053:2004. ITIL. Security Management
BS EN 30-2-1:1998 BS EN 30-2-1:1998. Domestic cooking appliances burning gas. Rational use of energy. General
BIP 2055:2004 BIP 2055:2004. Health and Safety Law Poster
BS EN 61000-4-16:1998, IEC 61000-4-16:1998 BS EN 61000-4-16:1998, IEC 61000-4-16:1998. Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
KIT 21 KIT 21. Occupational health and safety management systems set
BS EN 1097-9:1998 BS EN 1097-9:1998. Tests for mechanical and physical properties of aggregates. Determination of the resistance to wear by abrasion from studded tyres. Nordic test
BS EN 12255-5:1999 BS EN 12255-5:1999. Wastewater treatment plants. Lagooning processes
BS EN 61000-4-14:1999, IEC 61000-4-14:1999 BS EN 61000-4-14:1999, IEC 61000-4-14:1999. Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage fluctuation immunity test
BS EN 61000-4-17:1999, IEC 61000-4-17:1999 BS EN 61000-4-17:1999, IEC 61000-4-17:1999. Electromagnetic compatibility (EMC). Testing and measurement techniques. Ripple on d.c. input power port immunity test
BS EN 13041:2000 BS EN 13041:2000. Soil improvers and growing media. Determination of physical properties. Dry bulk density, air volume, water volume, shrinkage value and total pore space
BS EN ISO 6744-4:2004, BS 6782-16.4:2000 BS EN ISO 6744-4:2004, BS 6782-16.4:2000. Binders for paints and varnishes. Alkyd resins. Determination of fatty acid content
BS EN ISO 6744-1:2004, BS 6782-16.1:2000 BS EN ISO 6744-1:2004, BS 6782-16.1:2000. Binders for paints and varnishes. Alkyd resins. General methods
BS EN ISO 6744-3:2004, BS 6782-16.3:2000 BS EN ISO 6744-3:2004, BS 6782-16.3:2000. Binders for paints and varnishes. Alkyd resins. Determination of unsaponifiable matter content
BS EN ISO 6744-2:2004, BS 6782-16.2:2000 BS EN ISO 6744-2:2004, BS 6782-16.2:2000. Binders for paints and varnishes. Alkyd resins. Determination of phthalic anhydride content
BS EN 794-3:1999 BS EN 794-3:1999. Lung ventilators. Particular requirements for emergency and transport ventilators
BS EN 740:1999, BS 5724-2.204:1999 BS EN 740:1999, BS 5724-2.204:1999. Anaesthetic workstations and their modules. Particular requirements
BS 5440-2:2000 BS 5440-2:2000. Installation and maintenance of flues and ventilation for gas appliances of rated input not exceeding 70 kW net (1st, 2nd and 3rd family gases). Specification for installation and maintenance of ventilation for gas appliances
BS EN 12958:2000 BS EN 12958:2000. Footwear. Test methods for shanks. Fatigue resistance
BS ISO 10791-6:1998 BS ISO 10791-6:1998. Test conditions for machining centres. Accuracy of feeds, speeds and interpolations
BS EN 60730-2-16:1998 BS EN 60730-2-16:1998. Automatic electrical controls for household and similar use . Particular requirements for automatic electrical water level controls of the float type for household and similar applications
BS EN 60730-2-14:1998, IEC 60730-2-14:1995 BS EN 60730-2-14:1998, IEC 60730-2-14:1995. Automatic electrical controls for household and similar use. Particular requirements for electric actuators
BS EN 60730-2-13:1998, IEC 60730-2-13:1995 BS EN 60730-2-13:1998, IEC 60730-2-13:1995. Automatic electrical controls for household and similar use. Particular requirements for humidity sensing controls
BS EN 1708-1:1999 BS EN 1708-1:1999. Welding. Basic weld joint details in steel. Pressurized components
BS EN 136:1998 BS EN 136:1998. Respiratory protective devices. Full face masks. Requirements, testing, marking
BS EN 60464-1:1999, IEC 60464-1:1998 BS EN 60464-1:1999, IEC 60464-1:1998. Varnishes used for electrical insulation. Definitions and general requirements
BS EN 61558-2-2:1998, IEC 61558-2-2:1997 BS EN 61558-2-2:1998, IEC 61558-2-2:1997. Safety of power transformers, power supply units and similar. Particular requirements for control transformers
BS EN ISO 3171:1999, BS 2000-476:2002 BS EN ISO 3171:1999, BS 2000-476:2002. Methods of test for petroleum and its products. BS 2000-476: Petroleum liquids. Automatic pipeline sampling
BS EN 60851-6:1998, IEC 60851-6:1996 BS EN 60851-6:1998, IEC 60851-6:1996. Methods of test for winding wires. Thermal properties
BS EN ISO 14130:1998 BS EN ISO 14130:1998. Fibre-reinforced plastic composites. Determination of apparent interlaminar shear strength by short-beam method
BS EN 60679-1:1998, IEC 60679-1:1997 BS EN 60679-1:1998, IEC 60679-1:1997. Quartz crystal controlled oscillators of assessed quality. Generic specification
BS EN 583-1:1999 BS EN 583-1:1999. Non-destructive testing. Ultrasonic examination. General principles
BS EN 1291:1998 BS EN 1291:1998. Non-destructive testing of welds. Magnetic particle testing of welds. Acceptance levels
BS EN 1713:1998 BS EN 1713:1998. Non-destructive testing of welds. Ultrasonic testing. Characterization of indications in welds
BS EN 60931-1:1998, IEC 60931-1:1996 BS EN 60931-1:1998, IEC 60931-1:1996. Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV. General. Performance, testing and rating. Safety requirements. Guide for installation and operation
BS EN 609-1:1999 BS EN 609-1:1999. Agricultural and forestry machinery. Safety of log splitters. Wedge splitters
BS EN 60851-3:1998, IEC 60851-3:1996 BS EN 60851-3:1998, IEC 60851-3:1996. Methods of test for winding wires. Mechanical properties
BS EN 12062:1998 BS EN 12062:1998. Non-destructive examination of welds. General rules for metallic materials
BS EN 1726-1:1999 BS EN 1726-1:1999. Safety of industrial trucks. Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N. General requirements
BS ISO/IEC 9798-2:1999 BS ISO/IEC 9798-2:1999. Information technology. Security techniques. Entity authentication mechanisms. Mechanisms using symmetric encipherment algorithms
BS EN 12517:1998 BS EN 12517:1998. Non-destructive testing of welds. Radiographic testing of welded joints. Acceptance levels
BS EN 1714:1998 BS EN 1714:1998. Non destructive testing of welded joints. Ultrasonic testing of welded joints
BS EN ISO 9831:2003 BS EN ISO 9831:2003. Animal feeding stuffs, animal products, and faeces or urine. Determination of gross calorific value. Bomb calorimeter method
BS EN 1011-1:1998 BS EN 1011-1:1998. Welding. Recommendations for welding of metallic materials. General guidance for arc welding
BS EN 1290:1998 BS EN 1290:1998. Non-destructive examination of welds. Magnetic particle examination of welds
BS EN 60831-1:1998, IEC 60831-1:1996 BS EN 60831-1:1998, IEC 60831-1:1996. Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1kV. General. Performance, testing and rating. Safety requirements. Guide for installation and operation
BS EN 1289:1998 BS EN 1289:1998. Non-destructive examination of welds. Penetrant testing of welds. Acceptance levels
BS 4N 100-3:1999 BS 4N 100-3:1999. Aircraft oxygen systems and equipment. Testing of equipment and systems
BS EN 1593:1999 BS EN 1593:1999. Non-destructive testing. Leak testing. Bubble emission techniques
BS EN 1015-19:1999 BS EN 1015-19:1999. Methods of test for mortar for masonry. Determination of water vapour permeability of hardened rendering and plastering mortars
BS EN 1975:2000 BS EN 1975:2000. Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litre
BS EN 50214:1998 BS EN 50214:1998. Flexible cables for lifts
BS 7870-6.1:1999 BS 7870-6.1:1999. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations. PVC insulated and PVC sheathed cables
BS EN 61242:1998 BS EN 61242:1998. Electrical accessories. Cable reels for household and similar purposes
BS EN 1779:1999 BS EN 1779:1999. Non-destructive testing. Leak testing. Criteria for method and technique selection
BS 7870-6.3:1999 BS 7870-6.3:1999. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations. Cables with thermosetting insulation and non-halogenated sheath
BS 7870-6.2:1999 BS 7870-6.2:1999. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations. XLPE or HEPR insulated and PVC sheathed cables
BS EN 1711:2000 BS EN 1711:2000. Non-destructive examination of welds. Eddy current examination of welds by complex plane analysis
EP 601:1999 EP 601:1999. BSI Concise Construction Standards (CCS)
BS 5588-8:1999 BS 5588-8:1999. Fire precautions in the design, construction and use of buildings. Code of practice for means of escape for disabled people
BS EN 1570:1999 BS EN 1570:1999. Safety requirements for lifting tables
BS 6920-2.6:2000 BS 6920-2.6:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. The extraction of metals
BS 6920-2.5:2000 BS 6920-2.5:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. The extraction of substances that may be of concern to public health
BS 6920-2.2.3:2000 BS 6920-2.2.3:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. Odour and flavour of water. Method of testing tastes imparted to water by hoses for conveying water for food and drink preparation
BS EN ISO 15512:2003 BS EN ISO 15512:2003. Plastics. Determination of water content
BS 7960:1999 BS 7960:1999. Door supervisors/stewards. Code of practice
BS EN 1176-2:1998 BS EN 1176-2:1998. Playground equipment. Additional specific safety requirements and test methods for swings
BS EN 1176-4:1998 BS EN 1176-4:1998. Playground equipment. Additional specific safety requirements and test methods for runways
BS EN 1176-5:1999 BS EN 1176-5:1999. Playground equipment. Additional specific safety requirements and test methods for carousels
BS EN 1176-1:1998 BS EN 1176-1:1998. Playground equipment. General safety requirements and test methods
BS ISO 10790:1999 BS ISO 10790:1999. Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
BS EN 10277-2:1999 BS EN 10277-2:1999. Bright steel products. Technical delivery conditions. Steels for general engineering purposes
BS EN 60238:1999 BS EN 60238:1999. Edison screw lampholders
BS EN 60127-4:1998 BS EN 60127-4:1998. Miniature fuses. Universal modular fuse-links (UMF)
BS EN ISO 8388:2003 BS EN ISO 8388:2003. Knitted fabrics. Types. Vocabulary
BS ISO 188:1998, BS 903-A19:1998 BS ISO 188:1998, BS 903-A19:1998. Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
BS EN 12814-1:2000 BS EN 12814-1:2000. Testing of welded joints of thermoplastics semi-finished products. Bend test
BS EN 12132-2:1999 BS EN 12132-2:1999. Feather and down. Methods of testing the down-proof properties of fabrics. Impact test
BS EN 60838-1:1998, IEC 60838-1:1997 BS EN 60838-1:1998, IEC 60838-1:1997. Miscellaneous lampholders. General requirements and tests
BS 7011-2.2:1998, ISO 8037-2:1997 BS 7011-2.2:1998, ISO 8037-2:1997. Consumable accessories for light microscopes. Slides. Specification for materials and quality of finish
BS EN 60081:1998, IEC 60081:1997 BS EN 60081:1998, IEC 60081:1997. Double-capped fluorescent lamps. Performance specifications
BS ISO 11620:1998 BS ISO 11620:1998. Information and documentation. Library performance indicators
BS ISO 1754:1998 BS ISO 1754:1998. Photography. Cameras using 35 mm film and roll film. Picture sizes
BS EN 1424:1998 BS EN 1424:1998. Road marking materials. Premix glass beads
BS EN 61138:1998 BS EN 61138:1998. Cables for portable earthingand short-circuiting equipment
BS EN 50143:1999 BS EN 50143:1999. Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV
BS EN ISO 15186-1:2003 BS EN ISO 15186-1:2003. Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensity. Laboratory measurements
BS EN ISO 1183-3:1999 BS EN ISO 1183-3:1999. Plastics. Methods for determining the density of non-cellular plastics. Gas pyknometer method
BS ISO 11556:1998 BS ISO 11556:1998. Paper and board. Determination of curl using a single vertically suspended test piece
BS EN 12210:2000 BS EN 12210:2000. Windows and doors. Resistance to wind load. Classification
BS EN 1436:1998 BS EN 1436:1998. Road marking materials. Road marking performance for road users
BS EN 1252-1:1998 BS EN 1252-1:1998. Cryogenic vessels. Materials. Toughness requirements for temperatures below -80°C
BS ISO 2475:1999 BS ISO 2475:1999. Chloroprene rubber (CR). General-purpose types. Evaluation procedure
BS 7962:2000 BS 7962:2000. Black materials for masking existing road markings. Specification
BS EN 12372:1999 BS EN 12372:1999. Natural stone test methods. Determination of flexural strength under concentrated load
BS EN 60442:1999, IEC 60442:1998 BS EN 60442:1999, IEC 60442:1998. Electric toasters for household and similar purposes. Methods for measuring the performance
BS EN 12067-1:1999 BS EN 12067-1:1999. Gas/air ratio controls for gas burners and gas burning appliances. Pneumatic types
BS EN 60601-2-1:1998, BS 5724-2-1:1998,IEC 60601-2-1:1998 BS EN 60601-2-1:1998, BS 5724-2-1:1998,IEC 60601-2-1:1998. Medical electrical equipment. Particular requirements for the safety of electron accelerators in the range 1 MeV to 50 MeV
BS EN 61674:1998, IEC 61674:1997 BS EN 61674:1998, IEC 61674:1997. Medical electric equipment. Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnosis imaging
BS 6920-2.2.2:2000 BS 6920-2.2.2:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Odour and flavour of water. Method of testing odours and flavours imparted to water by hoses and composite pipes and tubes
BS ISO 4658:1999 BS ISO 4658:1999. Acrylonitrile-butadiene rubber (NBR). Evaluation procedure
BS EN 660-2:1999 BS EN 660-2:1999. Resilient floor coverings. Determination of wear resistance. Frick-Taber test
BS EN 54-4:1998 BS EN 54-4:1998. Fire detection and fire alarm systems. Power supply equipment
BS EN 60947-3:1999 BS EN 60947-3:1999. Low voltage switchgear and controlgear. Switches, disconnectors, switch-disconnectors and fuse-combination units
BS EN 660-1:1999 BS EN 660-1:1999. Resilient floor coverings. Determination of wear resistance. Stuttgart test
BS EN 60695-11-20:1999, IEC 60695-11-20:1999 BS EN 60695-11-20:1999, IEC 60695-11-20:1999. Fire hazard testing. Test flames. 500 W flame test methods
BS EN 60695-11-10:1999, IEC 60695-11-10:1999 BS EN 60695-11-10:1999, IEC 60695-11-10:1999. Fire hazard testing. Test flames. 50 W horizontal and vertical flame test methods
BS EN 60286-2:1998, IEC 60286-2:1997 BS EN 60286-2:1998, IEC 60286-2:1997. Packaging of components for automatic handling. Tape packaging of components with unidirectional leads on continuous tapes
BS IEC 60747-9:1998 BS IEC 60747-9:1998. Semiconductor devices. Discrete devices. Insulated-gate bipolar transistors (IGBTs)
BS EN 1501-1:1998 BS EN 1501-1:1998. Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements. Rear-end loaded refuse collection vehicles
BS EN 60317-0-4:1998, IEC 60317-0-4:1997 BS EN 60317-0-4:1998, IEC 60317-0-4:1997. Specification for particular types of winding wires. General requirements. Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire
BS EN 60317-0-1:1998, IEC 60317-0-1:1997 BS EN 60317-0-1:1998, IEC 60317-0-1:1997. Specification for particular types of winding wires. General requirements. Enamelled round copper wire
BS EN 60335-2-69:1999 BS EN 60335-2-69:1999. Specification for safety of household and similar electrical appliances. Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use
BS EN 61032:1998, IEC 61032:1997 BS EN 61032:1998, IEC 61032:1997. Protection of persons and equipment by enclosures. Probes for verification
BS EN 1885:1998 BS EN 1885:1998. Feather and down. Terms and definitions
BS EN 60947-5-3:1999, IEC 60947-5-3:1999 BS EN 60947-5-3:1999, IEC 60947-5-3:1999. Low-voltage switchgear and controlgear. Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDF)
BS EN 60947-5-5:1998, IEC 60947-5-5:1997 BS EN 60947-5-5:1998, IEC 60947-5-5:1997. Low-voltage switchgear and controlgear. Control circuit devices and switching elements. Electrical emergency stop devices with mechanical latching function
BS EN 60335-2-35:1998, IEC 60335-2-35:1997 BS EN 60335-2-35:1998, IEC 60335-2-35:1997. Specification for safety of household and similar electrical appliances. Particular requirements for instantaneous water heaters
BS EN 60349-1:2000, IEC 60349-1:1999 BS EN 60349-1:2000, IEC 60349-1:1999. Railway applications. Rotating electrical machines for rail and road vehicles. Machines other than electronic convertor-fed alternating current motors
BS EN 60309-2:1999, IEC 60309-2:1999 BS EN 60309-2:1999, IEC 60309-2:1999. Plugs, socket-outlets and couplers for industrial purposes. Dimensional interchangeability requirements for pin and contact-tube accessories
BS 7888-3:1998 BS 7888-3:1998. LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV). Test requirements for LV accessories
BS 7888-2:1998 BS 7888-2:1998. LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV). Methods of test
BS 7888-1:1998 BS 7888-1:1998. LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV). General
BS EN 1117:1999 BS EN 1117:1999. Heat exchangers. Liquid-cooled refrigerant condensers. Test methods for establishing the performance
BS EN 61195:2000, IEC 61195:1999 BS EN 61195:2000, IEC 61195:1999. Double-capped fluorescent lamps. Safety specifications
BS EN 10223-2:1998 BS EN 10223-2:1998. Steel wire and wire products for fences. Hexagonal steel wire netting for agricultural, insulation and fencing purposes
BS EN 1118:1999 BS EN 1118:1999. Heat exchangers. Refrigerant cooled liquid coolers. Test methods for establishing the performance
BS EN 60034-1:1998 BS EN 60034-1:1998. Rotating electrical machines. Rating and performance
BS EN 1654:1998 BS EN 1654:1998. Copper and copper alloys. Strip for springs and connectors
BS EN 1216:1999 BS EN 1216:1999. Heat exchangers. Forced circulation air-cooling and air-heating coils. Test procedures for establishing the performance
BS 6779-1:1998 BS 6779-1:1998. Highway parapets for bridges and other structures. Specification for vehicle containment parapets of metal construction
BS EN 419-1:2000 BS EN 419-1:2000. Non-domestic gas-fired overhead luminous radiant heaters. Safety
BS EN 1422:1998 BS EN 1422:1998. Sterilizers for medical purposes. Ethylene oxide sterilizers. Requirements and test methods
BS EN ISO 14125:1998 BS EN ISO 14125:1998. Fibre-reinforced plastic composites. Determination of flexural properties
BS EN 12523:1999 BS EN 12523:1999. External limb prostheses and external orthoses. Requirements and test methods
BS EN 60312:1998, IEC 60312:1998 BS EN 60312:1998, IEC 60312:1998. Vacuum cleaners for household use. Methods of measuring the performance
BS EN ISO 14126:1999 BS EN ISO 14126:1999. Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction
BS EN ISO 8185:1998, BS 5724-2.24:1998 BS EN ISO 8185:1998, BS 5724-2.24:1998. Humidifiers for medical use. General requirements for humidification systems
BS 4N 100-4:1999 BS 4N 100-4:1999. Aircraft oxygen systems and equipment. Guide to the physiological factors
BS EN ISO 8254-1:2003 BS EN ISO 8254-1:2003. Paper and board. Measurement of specular gloss. 75° gloss with a converging beam, TAPPI method
BS 6891:1998 BS 6891:1998. Specification for installation of low pressure gas pipework of up to 28 mm (R1) in domestic premises (2nd family gas)
BS EN 12492:2000 BS EN 12492:2000. Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods
BS EN 60947-1:1999 BS EN 60947-1:1999. Specification for low-voltage switchgear and controlgear. General rules
BS EN 328:1999 BS EN 328:1999. Heat exchangers. Test procedures for establishing the performance of forced convection unit air coolers for refrigeration
BS EN 60335-2-21:1999 BS EN 60335-2-21:1999. Specification for safety of household and similar electrical appliances. Particular requirements for storage water heaters
BS EN 12709:2000 BS EN 12709:2000. Plastic drums. Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 l
BS EN 12707:2000 BS EN 12707:2000. Plastic drums. Non-removable head (tight head) drums with a nominal capacity of 210 l, 220 l and 225 l
BS EN 60417-2:1999, IEC 60417-2:1998 BS EN 60417-2:1999, IEC 60417-2:1998. Graphical symbols for use on equipment. Symbol originals
BS EN 1611-1:2000 BS EN 1611-1:2000. Sawn timber. Appearance grading of softwoods. European spruces, firs, pines and Douglas fir
BS EN 60747-5-1:2001 BS EN 60747-5-1:2001. Discrete semiconductor devices and integrated circuits. Optoelectronic devices. General
BS EN 868-5:1999 BS EN 868-5:1999. Packaging materials and systems for medical devices which are to be sterilized. Heat and self-sealable pouches and reels of paper and plastic film construction. Requirements and test methods
BS 2000-342:2000 BS 2000-342:2000. Methods of test for petroleum and its products. Determination of thiol (mercaptan) sulfur in light and middle distillate fuels. Potentiometric method
BS EN 208:1999 BS EN 208:1999. Personal eye-protection. Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
BS EN 1870-2:1999 BS EN 1870-2:1999. Safety of woodworking machines. Circular sawing machines. Horizontal beam panel saws and vertical panel saws
BS EN 13014:2000 BS EN 13014:2000. Connections for gas sampling tubes to anaesthetic and respiratory equipment
OHSAS 18002:2000 OHSAS 18002:2000. Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001
OHSAS 18001:1999 OHSAS 18001:1999. Occupational health and safety management systems. Specification
BS EN 777-1:1999 BS EN 777-1:1999. Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. System D, safety
BS EN 1035:1999 BS EN 1035:1999. Tannery machines. Moving platen machinery. Safety requirements
BS EN ISO 6743-4:2001 BS EN ISO 6743-4:2001. Lubricants, industrial oils and related products (class L). Classification. Family H (hydraulic systems)
BS EN 1401-1:1998 BS EN 1401-1:1998. Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U). Specifications for pipes, fittings and the system
BS 4660:2000 BS 4660:2000. Thermoplastics ancillary fittings of nominal sizes 110 and 160 for below ground gravity drainage and sewerage
BS EN 60947-5-1:1998 BS EN 60947-5-1:1998. Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements. Electromechanical control circuit devices
BS 7188:1998 BS 7188:1998. Impact absorbing playground surfacing. Performance requirements and test methods
BS 6853:1999 BS 6853:1999. Code of practice for fire precautions in the design and construction of passenger carrying trains
BS EN 1176-6:1998 BS EN 1176-6:1998. Playground equipment. Additional specific safety requirements and test methods for rocking equipment
BS EN ISO 1628-2:2000 BS EN ISO 1628-2:2000. Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Poly(vinyl chloride) resins
BS EN 1451-1:2000 BS EN 1451-1:2000. Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Specifications for pipes, fittings and the system
BS EN 61243-3:1999, IEC 61243-3:1998 BS EN 61243-3:1999, IEC 61243-3:1998. Live working. Voltage detectors. Two-pole low voltage type
BS 2000-454:2000 BS 2000-454:2000. Methods of test for petroleum and its products. Determination of phosphorus in gasoline. Spectrophotometric method
BS 2000-450:2000 BS 2000-450:2000. Methods of test for petroleum and its products. Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Test method
BS 2000-74:2000, ISO 3733:1999 BS 2000-74:2000, ISO 3733:1999. Methods of test for petroleum and its products. Petroleum products and bituminous materials. Determination of water. Distillation method
BS EN 303-2:1999 BS EN 303-2:1999. Heating boilers. Heating boilers with forced draught burners. Special requirements for boilers with atomizing oil burners
BS EN 303-1:1999 BS EN 303-1:1999. Heating boilers. Heating boilers with forced draught burners. Terminology, general requirements, testing and marking
BS EN 50122-2:1999 BS EN 50122-2:1999. Railway applications. Fixed installations. Protective provisions against the effects of stray currents caused by d.c. traction systems
BS EN 1566-1:2000 BS EN 1566-1:2000. Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C). Specification for pipes, fittings and the system
BS EN 1565-1:2000 BS EN 1565-1:2000. Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC). Specifications for pipes, fittings and the system
BS EN 1176-3:1998 BS EN 1176-3:1998. Playground equipment. Additional specific safety requirements and test methods for slides
BS EN 1519-1:2000 BS EN 1519-1:2000. Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Specifications for pipes, fittings and the system
BS EN 50281-1-1:1999 BS EN 50281-1-1:1999. Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures. Construction and testing
BS EN 50281-1-2:1999 BS EN 50281-1-2:1999. Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures. Selection, installation and maintenance
BS EN 1455-1:2000 BS EN 1455-1:2000. Plastics piping systems for soil and waste (low and high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS). Specifications for pipes, fittings and the system
WD/BSENISO5350-2 : 1998 (text) WD/BSENISO5350-2 : 1998 (text).
WD/BSENISO5350-1 : 1998 WD/BSENISO5350-1 : 1998 .
BS EN 12259-4:2000 BS EN 12259-4:2000. Fixed firefighting systems. Components for sprinkler and water spray systems. Water motor alarms
BS EN 736-3:1999 BS EN 736-3:1999. Valves. Terminology. Definition of terms
BS EN 12218:1999 BS EN 12218:1999. Rail systems for supporting medical equipment
BS EN 738-4:1999 BS EN 738-4:1999. Pressure regulators for use with medical gases. Low-pressure regulators intended for incorporation into medical equipment
BS EN ISO 4256:1998, BS 2000-410:1998 BS EN ISO 4256:1998, BS 2000-410:1998. Liquid petroleum products. Determination of gauge vapour pressure. LPG method
BS EN ISO 6251:1998, BS 2000-411:1998,ISO 6251:1996 BS EN ISO 6251:1998, BS 2000-411:1998,ISO 6251:1996. Liquid petroleum gases. Corrosiveness to copper. Copper strip test
BS EN 12634:1998, BS 2000-449:1999 BS EN 12634:1998, BS 2000-449:1999. Petroleum products and lubricants. Determination of acid number. Non-aqueous potentiometric titration method
BS EN 10222-1:1998 BS EN 10222-1:1998. Steel forgings for pressure purposes. General requirements for open die forgings
BS EN 809:1998 BS EN 809:1998. Pumps and pump units for liquids. Common safety requirements
BS EN ISO 3325:1999 BS EN ISO 3325:1999. Sintered metal materials, excluding hardmetals. Determination of transverse rupture strength
BS EN ISO 14460:1999 BS EN ISO 14460:1999. Protective clothing for automobile racing drivers. Protection against heat and flame. Performance requirements and test methods
BS 5400-6:1999 BS 5400-6:1999. Steel, concrete and composite bridges. Specification for materials and workmanship, steel
BS EN 62105:2002 BS EN 62105:2002. Digital audio broadcasting system. Specification of the receiver data interface (RDI)
BS EN 1302:1999 BS EN 1302:1999. Chemicals used for treatment of water intended for human consumption. Aluminium-based coagulants. Analytical methods
BS 6779-4:1999 BS 6779-4:1999. Highway parapets for bridges and other structures. Specification for parapets of reinforced and unreinforced masonry construction
BS EN 1650:1998 BS EN 1650:1998. Chemical disinfectants and antiseptics. Quantitative suspension test for evaluation of fungicidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas. Test method and requirements (phase 2, step 1)
BS EN 1385:1998 BS EN 1385:1998. Helmets for canoeing and whitewater sports
BS EN 777-4:1999 BS EN 777-4:1999. Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. System H, safety
BS EN 777-2:1999 BS EN 777-2:1999. Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. System E, safety
BS EN 777-3:2000 BS EN 777-3:2000. Multi-burner gas-fired overhead radiant tube heater systems for non-domesticuse. System F, safety
BS EN 1775:1998 BS EN 1775:1998. Gas supply. Gas pipework in buildings. Maximum operating pressure ≤ 5 bar. Functional recommendations
BS EN 60811-2-1:1998, IEC 60811-2-1:1998 BS EN 60811-2-1:1998, IEC 60811-2-1:1998. Insulating and sheathing materials of electric cables. Common test methods. Methods specific to elastomeric compounds. Methods specific to elastomeric compounds. Ozone resistance, hot set and mineral oil immersion tests
BS EN 12868:1999 BS EN 12868:1999. Child use and care articles. Methodes for determining the release of N-nitrosamines and N-nitrosatable substances from elastomer or rubber teats and soothers
BS EN 1349:2000 BS EN 1349:2000. Industrial process control valves
BS EN 1319:1999 BS EN 1319:1999. Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
BS EN 50242:1999 BS EN 50242:1999. Electric dishwashers for household use. Test methods for measuring the performance
BS EN 12956:1999 BS EN 12956:1999. Wallcoverings in roll form. Determination of dimensions, straightness, spongeability and washability
BS EN 812:1998 BS EN 812:1998. Industrial bump caps
BS EN 60851-4:1998, IEC 60851-4:1996 BS EN 60851-4:1998, IEC 60851-4:1996. Winding Wires. Test methods. Chemical properties
BS EN ISO 12922:2002 BS EN ISO 12922:2002. Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
BS EN 60534-2-1:1999, IEC 60534-2-1:1998 BS EN 60534-2-1:1999, IEC 60534-2-1:1998. Industrial-process control valves. Flow capacity. Flow capacity. Sizing equations for fluid flow under installed conditions
BS EN 61284:1998, IEC 61284:1997 BS EN 61284:1998, IEC 61284:1997. Overhead lines. Requirements and tests for fittings
BS EN 61834-1:1998, IEC 61834-1:1998 BS EN 61834-1:1998, IEC 61834-1:1998. Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). General specifications
BS EN 60204-31:1998 BS EN 60204-31:1998. Safety of machinery. Electrical equipment of machines. Particular safety and EMC requirements for sewing machines, units and systems
BS EN 12946:2000 BS EN 12946:2000. Liming materials. Determination of calcium content and magnesium content. Complexometric method
BS EN 1442:1998 BS EN 1442:1998. Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Design and construction
BS EN ISO 6926:2001 BS EN ISO 6926:2001. Acoustics. Requirements for the performance and calibration of reference sound sources for the determination of sound power levels
BS EN ISO 11143:2000 BS EN ISO 11143:2000. Dental equipment. Amalgam separators
BS EN 60454-3-1:1998, IEC 60454-3-1:1998 BS EN 60454-3-1:1998, IEC 60454-3-1:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. PVC film tapes with pressure-sensitive adhesive
BS EN 1270:1998 BS EN 1270:1998. Playing field equipment. Basketball equipment. Functional and safety requirements, test methods
BS EN 1852-1:1998 BS EN 1852-1:1998. Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Specifications for pipes, fittings and the system
BS EN 60947-5-2:1999 BS EN 60947-5-2:1999. Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements. Proximity switches
BS ISO 8127-2:1999 BS ISO 8127-2:1999. Micrographics. A6 size microfilm jackets. Other types of jacket for 16 mm and 35 mm microfilm
BS EN 61803:1999, IEC 61803:1999 BS EN 61803:1999, IEC 61803:1999. Determination of power losses in high-voltage direct current (HVDC) converter stations
BS EN 1020:1998 BS EN 1020:1998. Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, incorporating a fan to assist transportation of combustion air and/or combustion products
BS EN 778:1998 BS EN 778:1998. Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
BS EN 621:1998 BS EN 621:1998. Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
BS 3414:2000 BS 3414:2000. Specification for hand-held crown bottle openers
BS ISO/IEC 14888-3:1998 BS ISO/IEC 14888-3:1998. Information technology. Security techniques. Digital signatures with appendix. Certificate-based mechanisms
BS CISPR 16-2:1996, CISPR 16-2:1996 BS CISPR 16-2:1996, CISPR 16-2:1996. Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity

BIS Standards Catalogue