BIS Standards Catalogue

BS EN ISO 583-1:2000 BS EN ISO 583-1:2000. Conveyor belts with a textile carcass. Total thickness and thickness of elements. Methods of test
BS ISO 8312:1999 BS ISO 8312:1999. Rubber compounding ingredients. Stearic acid. Definition and test methods
BS 5202-13:2000, ISO 10362-1:1999 BS 5202-13:2000, ISO 10362-1:1999. Methods for chemical analysis of tobacco and tobacco products. Determination of water in smoke condensate of cigarettes (gas chromatographic method)
EP 525 EP 525. Proteus Expert - Gap Analysis Tool
BS ISO 8126:2000 BS ISO 8126:2000. Micrographics. Duplicating film, silver, diazo and vesicular. Visual density. Specifications and measurement.
BS EN 1801:1999 BS EN 1801:1999. Transportable gas cylinders. Filling conditions for single acetylene cylinders
BS EN 50049-1:1998, BS 6552:1998 BS EN 50049-1:1998, BS 6552:1998. Domestic and similar electronic equipment interconnection requirements. Peritelevision connector
BS 6290-3:1999 BS 6290-3:1999. Lead-acid stationary cells and batteries. Specification for the flat positive plate type
WD/ISO/IEC8824-1 : 1998 WD/ISO/IEC8824-1 : 1998 . ISO/IEC 8824-1 Information technology - Abstract Syntax Notation One (ASN.1): Specification of basic notation
BS 6290-2:1999 BS 6290-2:1999. Lead-acid stationary cells and batteries. Specification for the high-performance Plante positive type
WD/ISO/IEC8824-2 : 1998 WD/ISO/IEC8824-2 : 1998 . ISO/IEC 8824-2 Information technology - Abstract Syntax Notation One (ASN.1): Information object specification
WD/ISO/IEC8824-3 : 1998 WD/ISO/IEC8824-3 : 1998 . ISO/IEC8824-3 : 1998 Information technology- Abstract Syntax Notation One (ASN.1): Constraint specification
WD/ISO/IEC8824-4 : 1998 WD/ISO/IEC8824-4 : 1998 . ISO/IEC 8824-4 Information technology - Abstract Syntax Notation One (ASN.1): Parameterization of ASN.1 specification
WD/ISO/IEC8825-1 : 1998 WD/ISO/IEC8825-1 : 1998 . ISO/IEC 8825-1 Information technology - ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules. (CER) and Distinguished Encoding Rules (DER)
WD/ISO/IEC8825-2 : 1998 WD/ISO/IEC8825-2 : 1998 . ISO/IEC 8825-2 Information technology - ASN.1 encoding rules: Specification of Packed Encoding Rules (PER)
BS EN ISO 14847:1999 BS EN ISO 14847:1999. Rotary positive displacement pumps. Technical requirements
BS ISO 13226:1999 BS ISO 13226:1999. Rubber. Standard reference elastomers (SRE's) for characterizing the effect of liquids on vulcanized rubbers
BS EN ISO 5667-16:1998, BS 6068-6.16:1998 BS EN ISO 5667-16:1998, BS 6068-6.16:1998. Water quality. Sampling. Guidance on biotesting of samples
BS AU 50-2.0b:2000, ISO 3911:1998 BS AU 50-2.0b:2000, ISO 3911:1998. Tyres and wheels. Wheels and rims. General (including vocabulary, designation and marking). Section 0b: General (including vocabulary, designation and marking)
BS EN 504:2000 BS EN 504:2000. Roofing products from metal sheet. Specification for fully supported roofing products of copper sheet
BS EN 505:2000 BS EN 505:2000. Roofing products from metal sheet. Specification for fully supported roofing products of steel sheet
BS EN 507:2000 BS EN 507:2000. Roofing products from metal sheet. Specification for fully supported roofing products of aluminium sheet
BS 4193-7:1999, ISO 5610:1998 BS 4193-7:1999, ISO 5610:1998. Hardmetal insert tooling. Single point tool holders for turning and copying for indexable inserts. Dimensions
BS EN 502:2000 BS EN 502:2000. Roofing products from metal sheet. Specification for fully supported products of stainless steel sheet
BS 6068-5.28:2000, ISO 10706:2000 BS 6068-5.28:2000, ISO 10706:2000. Water quality. Determination of long term toxicity of substances to Daphnia magna Straus (Cladocera, Crustacea)
BS ISO 3534-3:1999 BS ISO 3534-3:1999. Statistics. Vocabulary and symbols. Design of experiments
BS 848-2.6:2000, ISO 10302:1996 BS 848-2.6:2000, ISO 10302:1996. Fans for general purposes. Methods of noise testing. Airborne noise emitted by small air-moving devices. Section 6: Airborne noise emitted by small air-moving devices
BS EN ISO 10993-9:1999 BS EN ISO 10993-9:1999. Biological evaluation of medical devices. Framework for identification and quantification of potential degradation products
BS EN 1537:2000 BS EN 1537:2000. Execution of special geotechnical work. Ground anchors
BS EN 61199:2000, IEC 61199:1999 BS EN 61199:2000, IEC 61199:1999. Single-capped fluorescent lamps. Safety specifications
BS ISO 13775-2:2000 BS ISO 13775-2:2000. Thermoplastic tubing and hoses for automotive use. Petroleum-based fuel applications
BS ISO 13775-1:2000 BS ISO 13775-1:2000. Thermoplastic tubing and hoses for automotive use. Non-fuel applications
BS ISO 4660:1999 BS ISO 4660:1999. Rubber, raw natural. Colour index test
DD 248:1999 DD 248:1999. Determination of the hot storage stability of modified bitumen binders
BS 2000-448.2:1999 BS 2000-448.2:1999. Methods of test for petroleum and its products. Determination of the filterability of lubricating oils. Procedure for dry oils. Section 448.2: Procedure for dry oils
BS EN 60044-7:2000, IEC 60044-7:1999 BS EN 60044-7:2000, IEC 60044-7:1999. Instrument transformers. Electronic voltage transformers
BS 2000-394:1999 BS 2000-394:1999. Methods of test for petroleum and its products. Determination of air saturated vapour pressure (ASVP)
BS 2000-386:1999, ISO 10337:1997 BS 2000-386:1999, ISO 10337:1997. Methods of test for petroleum and its products. Crude petroleum. Determination of water. Coulometric Karl Fischer titration method
BS 2000-356:1999, ISO 10336:1997 BS 2000-356:1999, ISO 10336:1997. Methods of test for petroleum and its products. Crude petroleum. Determination of water. Potentiometric Karl Fischer titration method
BS ISO 974:2000 BS ISO 974:2000. Plastics. Determination of the brittleness temperature by impact
BS ISO 15040:1999 BS ISO 15040:1999. Composites. Prepregs. Determination of gel time
BS 2000-280:1999 BS 2000-280:1999. Methods of test for petroleum and its products. Petroleum products and lubricants. Inhibited mineral turbine oils. Determination of oxidation stability
BS ISO 10635:1999 BS ISO 10635:1999. Refractory products. Methods of test for ceramic fibre products.
BS EN 12508:2000 BS EN 12508:2000. Corrosion protection of metals and alloys. Surface treatment, metallic and other inorganic coatings. Vocabulary
BS EN 12800:2000 BS EN 12800:2000. Footwear. Test methods for insoles. Dimensional stability
BS EN 12785:2000 BS EN 12785:2000. Footwear. Test methods for whole shoe. Heel attachment
BS 2000-220:1998 BS 2000-220:1998. Methods of test for petroleum and its products. Petroleum products and lubricants. Determination of rust-prevention characteristics of lubricating greases
BS 2000-274:1999, ISO 6297:1997 BS 2000-274:1999, ISO 6297:1997. Methods of test for petroleum and its products. Petroleum products. Aviation and distillate fuels. Determination of electrical conductivity
BS 2000-195:1998 BS 2000-195:1998. Methods of test for petroleum and its products. Determination of distillation characteristics of volatile organic liquids
BS 2000-146:1998 BS 2000-146:1998. Methods of test for petroleum and its products. Determination of foaming characteristics of lubricating oils
BS 2000-139:1998 BS 2000-139:1998. Methods of test for petroleum and its products. Petroleum products and lubricants. Determination of acid or base number. Colour-indicator titration method
BS 2000-138:1998 BS 2000-138:1998. Methods of test for petroleum and its products. Determination of oxidation stability of aviation fuel. Potential residue method
BS 2000-136.2:1999, ISO 6293-2:1998 BS 2000-136.2:1999, ISO 6293-2:1998. Methods of test for petroleum and its products. Determination of saponification number. Potentiometric titration method. Section 136.2: Potentiometric titration method
BS EN 61316:2000, IEC 61316:1999 BS EN 61316:2000, IEC 61316:1999. Industrial cable reels
BS 2000-136.1:1998 BS 2000-136.1:1998. Methods of test for petroleum and its products. Determination of saponification number. Colour-indicator titration method. Section 136.1: Colour-indicator titration method
BS EN 50085-1:1999 BS EN 50085-1:1999. Cable trunking and cable ducting systems for electrical installations. General requirements
BS ISO 9197:1998 BS ISO 9197:1998. Paper, board and pulps. Determination of water-soluble chlorides
BS EN 45544-4:2000 BS EN 45544-4:2000. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Guide for selection, installation, use and maintenance
BS ISO 4093:1999 BS ISO 4093:1999. Diesel engines. Fuel injection pumps. High-pressure pipes for testing
WD/BSEN12350-5 : 2000 WD/BSEN12350-5 : 2000. BS EN 12350-5 Testing fresh concrete. Part 5: Flow table test
PD IEC 60079-20:2000, IEC 60079-20:1996 PD IEC 60079-20:2000, IEC 60079-20:1996. Electrical apparatus for explosive gas atmospheres. Data for flammable gases and vapours, relating to the use of electrical apparatus
WD/BSEN12350-4 : 2000 WD/BSEN12350-4 : 2000. BS EN 12350-4 Testing fresh concrete. Part 4: Degree of compactability
WD/BSEN12350-3 : 2000 WD/BSEN12350-3 : 2000.
BS EN 1736:2000 BS EN 1736:2000. Refrigerating systems and heat pumps. Flexible pipe elements, vibration isolators and expansion joints. Requirements, design and installation
BS EN 12154:2000 BS EN 12154:2000. Curtain walling. Watertightness. Performance requirements and classification
BS ISO 12645:1998 BS ISO 12645:1998. Graphic technology. Process control. Certified reference material for opaque area calibration of transmission densitometers
BS ISO 15359:1999 BS ISO 15359:1999. Paper and board. Determination of the static and kinetic coefficients of friction. Horizontal plane method
BS ISO 14968:1999 BS ISO 14968:1999. Paper and board. Cut-size office paper. Measurement of curl in a pack of sheets
BS ISO/IEC TR 14369:1999 BS ISO/IEC TR 14369:1999. Information technology. Programming languages, their environments and system software interfaces. Guidelines for the preparation of Language-Independent Service Specifications (LISS)
BS ISO/IEC ISP 12073:2000 BS ISO/IEC ISP 12073:2000. Information technology. International standardized profile FD16 directory data definitions. EDI use of the directory
BS EN 12470-3:2000 BS EN 12470-3:2000. Clinical thermometers. Performance of compact electrical thermometers (non-predictive and predictive) with maximum device
BS EN 12470-1:2000 BS EN 12470-1:2000. Clinical thermometers. Metallic liquid-in-glass thermometers with maximum device
BS EN 933-4:2000 BS EN 933-4:2000. Tests for geometrical properties of aggregates. Determination of particle shape. Shape index
WD/BSEN60350 : 1999 (text) WD/BSEN60350 : 1999 (text).
BS 7403-12:2000, ISO 4548-12:2000 BS 7403-12:2000, ISO 4548-12:2000. Full-flow lubricating oil filters for internal combustion engines. Filtration efficiency using particle counting, and contaminant retention capacity
BS ISO 13320-1:1999 BS ISO 13320-1:1999. Particle size analysis. Laser diffraction methods. General principles
BS EN 12455:1999 BS EN 12455:1999. Resilient floor coverings. Specification for corkment underlay
HB 10172:1999 HB 10172:1999. The Natural Step and ISO 14001. Guidance on the integration of a framework for sustainable development into environmental management systems
BS ISO 14965:2000 BS ISO 14965:2000. Ambient air. Determination of total non-methane organic compounds. Cryogenic preconcentration and direct flame ionization detection method
PD R086-001:2000, R086-001:1999 PD R086-001:2000, R086-001:1999. Guidance for technology audit of fibre optic connector kits and terminated connectors
BS EN 61000-4-15:1998, IEC 61000-4-15:1997 BS EN 61000-4-15:1998, IEC 61000-4-15:1997. Electromagnetic compatibility (EMC). Testing and measurement techniques. Flickermeter. Functional and design specifications. Basic EMC publication
BS EN ISO 4063:2000 BS EN ISO 4063:2000. Welding and allied processes. Nomenclature of processes and reference numbers
HB 10173:2000 HB 10173:2000. Management System Integration. A guide
BS 410-2:2000, ISO 3310-2:1999 BS 410-2:2000, ISO 3310-2:1999. Test sieves. Technical requirements and testing. Test sieves of perforated metal plate
BS ISO/IEC TR 11802-2:1999 BS ISO/IEC TR 11802-2:1999. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Technical reports and guidelines. Standard group MAC addresses
BS ISO 6200:1999 BS ISO 6200:1999. Micrographics. First generation silver-gelatin microforms of source documents. Density specifications and method of measurement
BS EN 737-2:1998 BS EN 737-2:1998. Medical gas pipeline systems. Anaesthetic gas scavenging disposal systems. Basic requirements
BS EN 12051:2000 BS EN 12051:2000. Building hardware. Door and window bolts. Requirements and test methods
BS EN 60068-5-2:2000, IEC 60068-5-2:1990 BS EN 60068-5-2:2000, IEC 60068-5-2:1990. Environmental testing. Guide to drafting of test methods. Terms and definitions
BS EN 60068-2-51:2000, IEC 60068-2-51:1983 BS EN 60068-2-51:2000, IEC 60068-2-51:1983. Environmental testing. Test methods. Tests. Tests Z/BFc. Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
BS EN 60068-2-50:2000, IEC 60068-2-50:1983 BS EN 60068-2-50:2000, IEC 60068-2-50:1983. Environmental testing. Test methods. Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat dissipating specimens
WD/BSEN60417-2 : 1999 (TEXT), IEC 60417-2:1998 WD/BSEN60417-2 : 1999 (TEXT), IEC 60417-2:1998.
BS EN 60068-2-48:2000, IEC 60068-2-48:1982 BS EN 60068-2-48:2000, IEC 60068-2-48:1982. Environmental testing. Test methods. Guidance on the application of the tests of IEC 60068 to simulate the effects of storage
ISO4224 : 2000 ISO4224 : 2000 . ISO 4224 Ambient air - Determination of carbon monoxide - Non-dispersive infrared spectrometry method
BS EN 60068-2-41:2000, IEC 60068-2-41:1976 BS EN 60068-2-41:2000, IEC 60068-2-41:1976. Environmental testing. Test methods. Tests. Test Z/BM: Combined dry heat/low air pressure tests
BS EN 60068-2-40:2000, IEC 60068-2-40:1976 BS EN 60068-2-40:2000, IEC 60068-2-40:1976. Environmental testing. Test methods. Test Z/AM. Combined cold/low air pressure tests
BS EN 60068-2-33:2000, IEC 60068-2-33:1971 BS EN 60068-2-33:2000, IEC 60068-2-33:1971. Environmental testing. Test methods. Guidance on change of temperature tests
BS ISO 7148-2:1999 BS ISO 7148-2:1999. Plain bearings. Testing of tribological behaviour of bearing materials. Testing of polymer-based bearing materials
BS ISO 7148-1:1999 BS ISO 7148-1:1999. Plain bearings. Testing of tribological behaviour of bearing materials. Testing of bearing metals
BS ISO 1085:1999 BS ISO 1085:1999. Assembly tools for screws and nuts. Double-ended wrenches. Size pairing
DISC PD 3004:1999 DISC PD 3004:1999. Guide to BS 7799 auditing
BS IEC 61496-2:1997 BS IEC 61496-2:1997. Safety of machinery. Electro-sensitive protective equipment. Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
BS EN 60068-2-14:2000, IEC 60068-2-14:1984 BS EN 60068-2-14:2000, IEC 60068-2-14:1984. Environmental testing. Test methods. Test N. Change of temperature
BS EN 60068-2-9:2000, IEC 60068-2-9:1975 BS EN 60068-2-9:2000, IEC 60068-2-9:1975. Environmental testing. Test methods. Tests. Guidance for solar radiation testing
BS EN 60068-2-5:2000, IEC 60068-2-5:1975 BS EN 60068-2-5:2000, IEC 60068-2-5:1975. Environmental testing. Test methods. Test Sa: Simulated solar radiation at ground level
BS EN 12507:2000 BS EN 12507:2000. Transportation services. Guidance notes on the application of EN ISO 9002 to the road transport, storage and distribution industries
BS EN 61496-1:1998, IEC 61496-1:1997 BS EN 61496-1:1998, IEC 61496-1:1997. Safety of machinery. Electro-sensitive protective equipment. General requirements and tests
BS EN 12706:2000 BS EN 12706:2000. Adhesives. Test methods for hydraulic setting floor smoothing and/or levelling compounds. Determinatiion of flow characteristics
BS EN ISO 6873:2000 BS EN ISO 6873:2000. Dental gypsum products
BS ISO 4406:1999 BS ISO 4406:1999. Hydraulic fluid power. Fluids. Method for coding the level of contamination by solid particles
BS EN 12705:2000 BS EN 12705:2000. Adhesives for leather and footwear materials. Determination of colour change of white or bright coloured leather surfaces by migration
BS ISO 12000:2000 BS ISO 12000:2000. Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Definitions and review of test methods
BS EN ISO 10456:2000 BS EN ISO 10456:2000. Building materials and products. Procedures for determining declared and design thermal values
BS EN 12704:2000 BS EN 12704:2000. Adhesives for paper and board, packaging and disposable sanitary products. Determination of foam formation for aqueous adhesives
BS EN ISO 13734:2001 BS EN ISO 13734:2001. Natural gas. Organic sulfur compounds used as odorants. Requirements and test methods
BS ISO 13012:1998 BS ISO 13012:1998. Rolling bearings, linear motion, recirculating ball, sleeve type. Accessories
BS ISO/TR 14696:1999 BS ISO/TR 14696:1999. Reaction to fire tests. Determination of fire parameters of materials, products and assemblies using an intermediate scale heat release calorimeter (ICAL)
BS EN 12774:2000 BS EN 12774:2000. Footwear. Test methods for outsoles. Determination of split tear strength and delamination resistance
BS EN 12784:2000 BS EN 12784:2000. Footwear. Test methods for the whole shoe. Thermal insulation
BS 7121-3:2000 BS 7121-3:2000. Code of practice for safe use of cranes. Mobile cranes
BS EN 1383:1999 BS EN 1383:1999. Timber structures. Test methods. Pull-through resistance of timber fasteners
BS EN 513:1999 BS EN 513:1999. Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Determination of the resistance to artificial weathering
BS ISO 12132:1999 BS ISO 12132:1999. Plain bearings. Quality assurance of thin-walled half bearings. Design FMEA
BS EN 61881:2000, IEC 61881:1999 BS EN 61881:2000, IEC 61881:1999. Railway applications. Rolling stock equipment. Capacitors for power electronics
BS A 361:2000, ISO 12281:1999 BS A 361:2000, ISO 12281:1999. Rivets, solid, 100° normal countersunk head, in metallic material, with or without surface treatment. Dimensions
BS A 358-3:2000, ISO 5855-3:1999 BS A 358-3:2000, ISO 5855-3:1999. MJ threads. Limit dimensions for fittings for fluid systems
BS A 358-2:2000, ISO 5855-2:1999 BS A 358-2:2000, ISO 5855-2:1999. MJ threads. Limit dimensions for bolts and nuts
BS A 358-1:2000, ISO 5855-1:1999 BS A 358-1:2000, ISO 5855-1:1999. MJ threads. General requirements
BS ISO 885:2000 BS ISO 885:2000. General purpose bolts and screws. Metric series. Radii under the head
BS ISO 13640:1999 BS ISO 13640:1999. Building construction. Jointing products. Specifications for test substrates
BS ISO 8670-3:2000 BS ISO 8670-3:2000. Ostomy collection bags. Determination of odour transmission of colostomy and ileostomy bags
BS ISO 11870:2000 BS ISO 11870:2000. Milk and milk products. Determination of fat content. General guidance on the use of butyrometric methods
BS ISO 6646:2000 BS ISO 6646:2000. Rice. Determination of the potential milling yield from paddy and husked rice
BS EN ISO 8980-3:1999, BS 2738-9:1999 BS EN ISO 8980-3:1999, BS 2738-9:1999. Ophthalmic optics. Uncut finished spectacle lenses. Transmittance specifications and test methods
BS EN 12771:2000 BS EN 12771:2000. Footwear. Test methods for outsoles. Tear strength
BS EN 12770:2000 BS EN 12770:2000. Footwear. Test methods for outsoles. Abrasion resistance
BS EN 12782:2000 BS EN 12782:2000. Footwear. Test methods for insoles. Resistance to stitch tear
BS ISO 15202-1:2000 BS ISO 15202-1:2000. Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sampling
BS EN 12982:2000 BS EN 12982:2000. Industrial valves. End-to-end and centre-to-end dimensions for butt welding end valves
BS EN 1870-1:1999 BS EN 1870-1:1999. Safety of woodworking machines. Circular sawing machines. Circular saw benches (with and without sliding table) and dimension saws
BS A 357:2000, ISO 13599:2000 BS A 357:2000, ISO 13599:2000. Inserts, with clearance hole, in metallic material, coated or uncoated. Dimensions
BS A 356:2000, ISO 13598:2000 BS A 356:2000, ISO 13598:2000. Inserts, self-locking, with MJ threads, reduced flanges, closed type, in metallic material, coated or uncoated. Dimensions
BS A 355:2000, ISO 13597:2000 BS A 355:2000, ISO 13597:2000. Inserts, self-locking, with MJ threads, open type, in metallic material, coated or uncoated. Dimensions
BS A 354:2000, ISO 13596:2000 BS A 354:2000, ISO 13596:2000. Inserts, self-locking, with MJ threads, closed type, in metallic material, coated or uncoated. Dimensions
BS A 353:2000, ISO 13595:2000 BS A 353:2000, ISO 13595:2000. Inserts, with self-locking floating nut, with MJ threads, in metallic material, coated or uncoated. Dimensions
BS EN 1052-2:1999 BS EN 1052-2:1999. Methods of test for masonry. Determination of flexural strength
BS A 352:2000, ISO 12290:2000 BS A 352:2000, ISO 12290:2000. Rivets, solid, in titanium or titanium alloy. Procurement specification
BS A 351:2000, ISO 12288:2000 BS A 351:2000, ISO 12288:2000. Rivets, solid, in nickel alloy. Procurement specification
BS EN 12943:2000 BS EN 12943:2000. Filler materials for thermoplastics. Scope, designation, requirements, tests
BS EN 13100-1:2000 BS EN 13100-1:2000. Non destructive testing of welded joints of thermoplastics semi-finished products. Visual examination
BS EN 12814-6:2000 BS EN 12814-6:2000. Testing of welded joints of thermoplastics semi-finished products. Low temperature tensile test
BS EN 12814-2:2000 BS EN 12814-2:2000. Testing of welded joints of thermoplastics semi-finished products. Tensile test
BS EN 12227-2:1999 BS EN 12227-2:1999. Playpens for domestic use. Test methods
BS EN 12227-1:1999 BS EN 12227-1:1999. Playpens for domestic use. Safety requirements
HB 10164:1999 HB 10164:1999. Managing the environment the 14001 way
BS EN 1516:1999 BS EN 1516:1999. Surfaces for sports areas. Determination of resistance to indentation
BS ISO/TR 13387-8:1999 BS ISO/TR 13387-8:1999. Fire safety engineering. Life safety. Occupant behaviour, location and condition
BS ISO/TR 13387-7:1999 BS ISO/TR 13387-7:1999. Fire safety engineering. Detection, activation and suppression
BS ISO/TR 13387-6:1999 BS ISO/TR 13387-6:1999. Fire safety engineering. Structural response and fire spread beyond the enclosure of origin
BS ISO/TR 13387-5:1999 BS ISO/TR 13387-5:1999. Fire safety engineering. Movement of fire effluents
BS ISO/TR 13387-4:1999 BS ISO/TR 13387-4:1999. Fire safety engineering. Initiation and development of fire and generation of fire effluents
BS ISO/TR 13387-3:1999 BS ISO/TR 13387-3:1999. Fire safety engineering. Assessment and verification of mathematical fire models
BS ISO/TR 13387-2:1999 BS ISO/TR 13387-2:1999. Fire safety engineering. Design fire scenarios and design fires
BS ISO/TR 13387-1:1999 BS ISO/TR 13387-1:1999. Fire safety engineering. Application of fire performance concepts to design objectives
BS EN 60598-2-5:1998, IEC 60598-2-5:1998 BS EN 60598-2-5:1998, IEC 60598-2-5:1998. Luminaires. Particular requirements. Floodlights
WD/AMD10806(COR1 TO EQ106 BS5500 :1997) WD/AMD10806(COR1 TO EQ106 BS5500 :1997).
BS EN ISO 3262-8:2000 BS EN ISO 3262-8:2000. Extenders for paints. Specifications and methods of test. Natural clay
BS EN 12877-4:2000 BS EN 12877-4:2000. Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. Determination by two-roll milling
BS EN 12877-3:2000 BS EN 12877-3:2000. Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. Determination by oven test
BS EN 12877-2:2000 BS EN 12877-2:2000. Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. Determination by injection moulding
BS EN 12877-1:2000 BS EN 12877-1:2000. Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. General introduction
BS EN 1778:2000 BS EN 1778:2000. Characteristic values for welded thermoplastics constructions. Determination of allowable stresses and moduli for design of thermoplastics equipment
DC99/716063 DC99/716063. Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples
EP 530 EP 530. ISO DIS 9000. Quality management systems
BS ISO 15402:2000 BS ISO 15402:2000. Ships and marine technology. Bulk carriers. Repair quality of hull structure
BS ISO 15401:2000 BS ISO 15401:2000. Ships and marine technology. Bulk carriers. Construction quality of hull structure
BS 7941-1:1999 BS 7941-1:1999. Methods for measuring the skid resistance of pavement surfaces. Side-way force coefficient routine investigation machine
BS EN ISO 14530-3:2000 BS EN ISO 14530-3:2000. Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs). Requirements for selected moulding compounds
BS EN ISO 14530-2:2000 BS EN ISO 14530-2:2000. Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs). Preparation of test specimens and determination of properties
BS EN ISO 14530-1:2000 BS EN ISO 14530-1:2000. Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs). Designation system and basis for specifications
BS ISO 12686:1999 BS ISO 12686:1999. Metallic and other inorganic coatings. Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish
BS ISO 10587:2000 BS ISO 10587:2000. Metallic and other inorganic coatings. Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods. Inclined wedge method
BS EN ISO 15252-3:2000 BS EN ISO 15252-3:2000. Plastics. Epoxy powder moulding compounds (EP-PMCs). Requirements for selected moulding compounds
BS EN ISO 15252-2:2000 BS EN ISO 15252-2:2000. Plastics. Epoxy powder moulding compounds (EP-PMCs). Preparation of test specimens and determination of properties
BS EN ISO 15252-1:2000 BS EN ISO 15252-1:2000. Plastics. Epoxy powder moulding compounds (EP-PMCs). Designation system and basis for specifications
BS EN ISO 14529-3:2000 BS EN ISO 14529-3:2000. Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs). Requirements for selected moulding compounds
BS EN ISO 14529-2:2000 BS EN ISO 14529-2:2000. Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs). Preparation of test specimens and determination of properties
BS EN ISO 14529-1:2000 BS EN ISO 14529-1:2000. Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs). Designation system and basis for specifications
BS EN ISO 14528-3:2000 BS EN ISO 14528-3:2000. Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs). Requirements for selected moulding compounds
BS EN ISO 14528-2:2000 BS EN ISO 14528-2:2000. Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs). Preparation of test specimens and determination of properties
BS EN ISO 14528-1:2000 BS EN ISO 14528-1:2000. Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs). Designation system and basis for specifications
BS EN ISO 14527-3:2000 BS EN ISO 14527-3:2000. Plastics. Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs). Requirements for selected moulding compounds
BS EN ISO 14527-2:2000 BS EN ISO 14527-2:2000. Preparation of test specimens and determination of properties
BS EN ISO 14527-1:2000 BS EN ISO 14527-1:2000. Plastics. Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs). Designation system and basis for specifications
BS EN ISO 14526-3:2000 BS EN ISO 14526-3:2000. Plastics. Phenolic powder moulding compounds (PF-PMCs). Requirements for selected moulding compounds
BS EN ISO 14526-2:2000 BS EN ISO 14526-2:2000. Plastics. Phenolic powder moulding compounds (PF-PMCs). Preparation of test specimens and determination of properties
BS EN ISO 14526-1:2000 BS EN ISO 14526-1:2000. Plastics. Phenolic powder moulding compounds (PF-PMCs). Designation system and basis for specifications
BS ISO 3547-4:1999 BS ISO 3547-4:1999. Plain bearings. Wrapped bushes. Materials
BS ISO 3547-3:1999 BS ISO 3547-3:1999. Plain bearings. Wrapped bushes. Lubrication holes, lubrication grooves and lubrication indentations
BS ISO 3547-2:1999 BS ISO 3547-2:1999. Plain bearings. Wrapped bushes. Test data for outside and inside diameter
BS ISO 3547-1:1999 BS ISO 3547-1:1999. Plain bearings. Wrapped bushes. Dimensions
BS ISO 13778:1999 BS ISO 13778:1999. Plain bearings. Quality assurance of thin-walled half bearings. Selective assembly of bearings to achieve a narrow clearance range
BS EN ISO 10504:2000 BS EN ISO 10504:2000. Starch derivatives. Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups. Method using high-performance liquid chromatography
DISC PD 3001:1999 DISC PD 3001:1999. Preparing for BS 7799 certification
BS ISO/IEC 15434:1999 BS ISO/IEC 15434:1999. Information technology. Transfer syntax for high capacity ADC media
BS ISO 2470:1999 BS ISO 2470:1999. Paper, board and pulps. Measurement of diffuse blue reflectance factor (ISO brightness)
BS ISO 9136-2:2000 BS ISO 9136-2:2000. Abrasive grains. Determination of bulk density. Microgrits
BS EN 12974:2000 BS EN 12974:2000. Surface active agents. Determination of the 1,4-dioxane content in alkyl-ethoxy-sulfate products by GLC/head space procedure
BS 7959-1:2000 BS 7959-1:2000. Materials used for the control of liquid spillages. Determination of sorbency
BS 6183-2:2000 BS 6183-2:2000. Protective equipment for cricketers. Genital protectors
WD/HB10171 : 1999 WD/HB10171 : 1999.
WD/HB10170 : 1999 WD/HB10170 : 1999.
WD/HB10168 : 1999 WD/HB10168 : 1999.
WD/HB10167 : 1999 WD/HB10167 : 1999.
KIT 42 KIT 42. Emergency lighting pack
BS 6043-1.11:2000, ISO 12979:1999 BS 6043-1.11:2000, ISO 12979:1999. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Determination of the atomic C/H ratio of the quinoline-insoluble material
BS 6043-1.10:2000, ISO 12977:1999 BS 6043-1.10:2000, ISO 12977:1999. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of volatile matter content. Section 1.10 Determination of volatile matter content
PD ISO/TR 10017:2000, ISO/TR 10017:1999 PD ISO/TR 10017:2000, ISO/TR 10017:1999. Guidance on statistical techniques for ISO 9001:1994
BS EN ISO 3382:2000 BS EN ISO 3382:2000. Acoustics. Measurement of the reverberation time of rooms with reference to other acoustical parameters
BS ISO 15668:1999 BS ISO 15668:1999. Banking. Secure file transfer (retail)
BS EN 358:2000 BS EN 358:2000. Personal protective equipment for work positioning and prevention of falls from a height. Belts for work positioning and restraint and work positioning lanyards
BS ISO 2076:1999 BS ISO 2076:1999. Textiles. Man-made fibres. Generic names
BS 6043-4.4:2000, ISO/TS 14425:1999 BS 6043-4.4:2000, ISO/TS 14425:1999. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the volatile matter content of unbaked paste. Section 4.4 Determination of the volatile matter content of unbaked paste
BS 6043-4.1:2000, ISO 14422:1999 BS 6043-4.1:2000, ISO 14422:1999. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Methods of sampling
BS 6043-4.2:2000, ISO/TS 14423:1999 BS 6043-4.2:2000, ISO/TS 14423:1999. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution. Section 4.2 Determination of effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution
CWA 13700:1999 CWA 13700:1999. Requirements for metadata for multimedia information
BS EN ISO 12020:2000 BS EN ISO 12020:2000. Water quality. Determination of aluminium. Atomic absorption spectrometric methods
BS EN 1984:2000 BS EN 1984:2000. Industrial valves. Steel gate valves
BS EN 1553:2000 BS EN 1553:2000. Agricultural machinery. Agricultural self-propelled mounted, semi-mounted and trailed machines. Common safety requirements
BS ISO 14512:1999 BS ISO 14512:1999. Passenger cars. Straight-ahead braking on surfaces with split coefficient of friction. Open-loop test method
BS IEC 61526:1998 BS IEC 61526:1998. Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma and beta radiations. Direct reading personal dose equivalent and/or dose equivalent rate dosemeters
BS EN 10132-4:2000 BS EN 10132-4:2000. Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. Spring steels and other applications
BS EN ISO 9913-2:2000, BS 7208-23:2000 BS EN ISO 9913-2:2000, BS 7208-23:2000. Optics and optical instruments. Contact lenses. Determination of oxygen permeability and transmissibility by the coulometric method
BS ISO 5596:1999 BS ISO 5596:1999. Hydraulic fluid power. Gas-loaded accumulators with separator. Ranges of pressures and volumes and characteristic quantities
BS ISO 12240-4:1998 BS ISO 12240-4:1998. Spherical plain bearings. Spherical plain bearing rod ends
DISC PD 5000:1999 DISC PD 5000:1999. An international code of good practice in five parts for electronic documents and e-commerce transactions as legally admissible evidence
BS EN 1850-1:2000 BS EN 1850-1:2000. Flexible sheets for waterproofing. Determination of visible defects. Bitumen sheets for roof waterproofing
BS EN 1849-1:2000 BS EN 1849-1:2000. Flexible sheets for waterproofing. Determination of thickness and mass per unit area. Bitumen sheets for roof waterproofing
BS EN 1848-1:2000 BS EN 1848-1:2000. Flexible sheets for waterproofing. Determination of length, width and straightness. Bitumen sheets for roof waterproofing
BS EN 1108:2000 BS EN 1108:2000. Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of form stability under cyclical temperature changes
BS ISO 10791-1:1998 BS ISO 10791-1:1998. Test conditions for machining centres. Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis)
BS ISO 1766:1999 BS ISO 1766:1999. Textile floor coverings. Determination of thickness of pile above the substrate
BS ISO 11858:1999 BS ISO 11858:1999. Textile floor coverings. Determination of friability of attached foams
BS EN 61754-12:2000, IEC 61754-12:1999 BS EN 61754-12:2000, IEC 61754-12:1999. Fibre optic connector interfaces. Type FS connector family
BS EN 61300-2-43:2000, IEC 61300-2-43:1999 BS EN 61300-2-43:2000, IEC 61300-2-43:1999. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Screen testing of return loss of single mode PC optical fibre connectors. Section 43: Screen testing of return loss of single mode PC optical fibre connectors
CWA 13699:1999 CWA 13699:1999. Model for metadata for multimedia information
BS EN 1109:2000 BS EN 1109:2000. Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flexibility at low temperature
BS EN 1110:2000 BS EN 1110:2000. Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flow resistance at elevated temperature
BS EN 12039:2000 BS EN 12039:2000. Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of adhesion of granules
DC99/715104 DC99/715104. Draft British Standard, ISO 5697-1, Tractors and amchinery for agriculture and forestry - braking systems. Part 1 : Requirements
BS EN ISO 1854:2000 BS EN ISO 1854:2000. Whey cheese. Determination of fat content. Gravimetric method (reference method)
BS EN 1254-4:1998 BS EN 1254-4:1998. Copper and copper alloys. Plumbing fittings. Fittings combining other end connections with capillary or compression ends
BS ISO 11798:1999 BS ISO 11798:1999. Information and documentation. Permanence and durability of writing, printing and copying on paper. Requirements and test methods
BS ISO 11475:1999 BS ISO 11475:1999. Paper and board. CIE whiteness, D65/10 degrees (outdoor daylight)
BS ISO 525:1999 BS ISO 525:1999. Bonded abrasive products. General requirements. Part 1 : Specification for general features of abrasive wheels, segments, bricks and sticks
BS ISO 11614:1999 BS ISO 11614:1999. Reciprocating internal combustion compression-ignition engines. Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
BS 1016-104.4:1998, ISO 1171:1997 BS 1016-104.4:1998, ISO 1171:1997. Methods for analysis and testing of coal and coke. Determination of ash content
BS EN 12316-1:2000 BS EN 12316-1:2000. Flexible sheets for waterproofing. Determination of peel resistance of joints. Bitumen sheets for roof waterproofing
BS EN 12311-1:2000 BS EN 12311-1:2000. Flexible sheets for waterproofing. Determination of tensile properties. Bitumen sheets for roof waterproofing
BS EN 12182:1999 BS EN 12182:1999. Technical aids for disabled persons. General requirements and test methods
BS EN 12310-1:2000 BS EN 12310-1:2000. Flexible sheets for waterproofing. Determination of resistance to tearing (nail shank). Bitumen sheets for roof waterproofing
DISC PD 0012-2:2000 DISC PD 0012-2:2000. Data protection. Guide to developing an e-mail policy
BS ISO 10767-3:1999 BS ISO 10767-3:1999. Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components. Method for motors
BS EN 60603-14:1999, IEC 60603-14:1998 BS EN 60603-14:1999, IEC 60603-14:1998. Connectors for frequencies below 3 MHz for use with printed boards. Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment
PD 6659:2000 PD 6659:2000. PNO-ISC information document number 004. Proprietary extensions to C7 interconnect user part (IUP)
BS ISO 9588:1999 BS ISO 9588:1999. Metallic and other inorganic coatings. Post-coating treatments of iron and steel to reduce the risk of hydrogen embrittlement
BS ISO 13806:1999 BS ISO 13806:1999. Vitreous and porcelain enamels. Corrosion tests in closed systems
BS ISO 13804:1999 BS ISO 13804:1999. Vitreous and porcelain enamels for aluminium. Production of specimens for testing
BS EN ISO 9488:2000 BS EN ISO 9488:2000. Solar energy. Vocabulary
BS 747:2000 BS 747:2000. Reinforced bitumen sheets for roofing. Specification
DD ENV 13419-3:1999 DD ENV 13419-3:1999. Building products. Determination of the emission of volatile organic compounds. Procedure for sampling, storage of samples and preparation of test specimens
DD ENV 13419-2:1999 DD ENV 13419-2:1999. Building products. Determination of the emission of volatile organic compounds. Emission test cell method
DD ENV 13419-1:1999 DD ENV 13419-1:1999. Building products. Determination of the emission of volatile organic compounds. Emission test chamber method
BS A 364:2000, ISO 17057:1999 BS A 364:2000, ISO 17057:1999. Rivets, solid. Test method
BS ISO 10959:2000 BS ISO 10959:2000. Aerospace. MJ threads. Gauging
BS A 363:2000, ISO 9154:1999 BS A 363:2000, ISO 9154:1999. Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification
BS ISO 1998-1:1998 BS ISO 1998-1:1998. Petroleum industry. Terminology. Raw materials and products
BS IEC 60692:1999 BS IEC 60692:1999. Nuclear instrumentation. Density gauges utilizing ionizing radiation. Definitions and test methods
BS IEC 60319:1999 BS IEC 60319:1999. Presentation and specification of reliability data for electronic components
BS EN 12772:2000 BS EN 12772:2000. Footwear. Test methods for outsoles. Dimensional stability
BS EN 12773:2000 BS EN 12773:2000. Footwear. Test methods for outsoles. Needle tear strength
BSIEC61010-3-020 : 1999 (DISK) BSIEC61010-3-020 : 1999 (DISK).
BS IEC 61010-3-020:1999 BS IEC 61010-3-020:1999. Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-020:1992, particular requirements for laboratory centrifuges
BS EN ISO 703-1:2000 BS EN ISO 703-1:2000. Conveyor belts. Transverse flexibility and troughability. Test method
ISO/IEC11581-3 : 2000 ISO/IEC11581-3 : 2000 . ISO/IEC 11581-3 Information technology -- User system interfaces and symbols -- Icon symbols and functions. Part 3: Pointer icons
ISO/IEC11581-2 : 2000 ISO/IEC11581-2 : 2000 .
ISO/IEC11581-1 : 2000 ISO/IEC11581-1 : 2000 . ISO/IEC 11581-1 Information technology -- User system interfaces and symbols -- Icon symbols and functions. Part 1: Icons -- General
BS EN 12703:1999 BS EN 12703:1999. Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature
BS EN 1937:1999 BS EN 1937:1999. Test method for hydraulic setting floor smoothing and/or levelling compounds. Standard mixing procedures
ISO/IECTR13818-5 AMD1 ISO/IECTR13818-5 AMD1 . ISO/IEC 13818-5/AMD 1 Information technology - Generic coding of moving pictures and associated audio information . Software Simulation. Advanced Audio Coding (AAC) ntifier
BS EN 1903:1999 BS EN 1903:1999. Adhesives. Test method for adhesives for plastic or rubber floor coverings or wall coverings. Determination of dimensional changes after accelerated ageing
BS EN 1902:1999 BS EN 1902:1999. Adhesives. Test methods for adhesives for floor coverings and wall coverings. Shear test
BS 4019-5:1999, ISO 10097-1:1999 BS 4019-5:1999, ISO 10097-1:1999. Rotary core drilling equipment. Rotary core drilling equipment. Specification for wireline diamond drilling equipment. System A. Metric units
BS ISO/IEC 14598-4:1999 BS ISO/IEC 14598-4:1999. Information technology. Software production evaluation. Process for acquirers
BS EN 952:1999 BS EN 952:1999. Door leaves. General and local flatness. Measurement method
BS EN 950:1999 BS EN 950:1999. Door leaves. Determination of the resistance to hard body impact
PD ISO/TR 14032:2000, ISO/TR 14032:1999 PD ISO/TR 14032:2000, ISO/TR 14032:1999. Environmental management. Examples of environmental performance evaluation (EPE)
BS EN 948:1999 BS EN 948:1999. Hinged or pivoted doors. Determination of the resistance to static torsion
KIT 37 KIT 37. Vehicle restraint systems set (PD 6634)
BS EN 12590:2000 BS EN 12590:2000. Textiles. Industrial sewing threads made wholly or partly form synthetic fibres
DISC PD 3003:1999 DISC PD 3003:1999. Are you ready for a BS 7799 audit?
BS 4A 113:1999 BS 4A 113:1999. Specification for cadmium-plated, mushroom-headed, unified-thread, slotted drive, bolts
BS 7423:1999 BS 7423:1999. Specification for safety requirements for children's travel cots of internal base length not less than 900 mm
BS 3424-13:1999 BS 3424-13:1999. Testing coated fabrics. Guide to the selection of methods for colour fastness to light testing
DC99/565777 DC99/565777. ISO 6107-8 Water quality - Vocabulary. Part 8: Amendment 1
DC99/565776 DC99/565776. DC99/565776 ISO 6107-3 Water quality - Vocabulary. Part 3 Amendment 1
BS ISO 7112:1999 BS ISO 7112:1999. Machinery for forestry. Portable hand-held brush-cutters and grass-trimmers. Vocabulary
BS EN 939:2000 BS EN 939:2000. Chemicals used for treatment of water intended for human consumption. Hydrochloric acid
BS EN 938:2000 BS EN 938:2000. Chemicals used for treatment of water intended for human consumption. Sodium chlorite
BS EN 902:2000 BS EN 902:2000. Chemicals used for treatment of water intended for human consumption. Hydrogen peroxide
BS EN 901:2000 BS EN 901:2000. Chemicals used for treatment of water intended for human consumption. Sodium hypochlorite
BS EN 900:2000 BS EN 900:2000. Chemicals used for treatment of water intended for human consumption. Calcium hypochlorite
BS ISO 10015:1999 BS ISO 10015:1999. Quality management. Guidelines for training
PD 60079-14:2000 PD 60079-14:2000. Guide to application of BS EN 60079-14
BS EN 644:1999 BS EN 644:1999. Paper. Untrimmed sizes. Primary range and supplementary range designation and tolerances, expression of direction of manufacture
BS EN 13092:2000 BS EN 13092:2000. Biotechnology. Guidance on sampling and inoculation procedures
BS EN 12823-2:2000 BS EN 12823-2:2000. Foodstuffs. Determination of vitamin A by high performance liquid chromatography. Measurement of β-carotene
PD CR 13694:1999, CR 13694:1999 PD CR 13694:1999, CR 13694:1999. Health informatics. Safety and security related software quality standards for healthcare (SSQS)
BS EN 12858:1999 BS EN 12858:1999. Paper. Printing and business paper. Requirements for continuous stationery
BS EN 12823-1:2000 BS EN 12823-1:2000. Foodstuffs. Determination of vitamin A by high performance liquid chromatography. Measurement of all-trans-retinol and 13-cis-retinol
BS EN 12822:2000 BS EN 12822:2000. Foodstuffs. Determination of vitamin E by high performance liquid chromatography. Measurement of α-, β-, γ- and δ-tocopherols
BS EN 13091:2000 BS EN 13091:2000. Biotechnology. Performance criteria for filter elements and filtration assemblies
BS EN 1624:1999 BS EN 1624:1999. Textiles and textile products. Burning behaviour of industrial and technical textiles. Procedure to determine the flame spread of vertically oriented specimens
BS EN 1625:1999 BS EN 1625:1999. Textiles and textile products. Burning behaviour of industrial and technical textiles. Procedure to determine the ignitability of vertically oriented specimens
BS EN 12821:2000 BS EN 12821:2000. Foodstuffs. Determination of vitamin D by high perfomance liquid chromatography. Measurement of cholecalciferol (D3) and ergocalciferol (D2)
BS EN ISO 9997:2000 BS EN ISO 9997:2000. Dental cartridge syringes
BS EN 1107-1:2000 BS EN 1107-1:2000. Flexible sheets for waterproofing. Determination of dimensional stability. Bitumen sheets for roof waterproofing
BS ISO 6344-3:1998 BS ISO 6344-3:1998. Coated abrasives. Grain size analysis. Determination of grain size distribution of microgrits P240 to P2500
BS EN 12915:1999 BS EN 12915:1999. Products used for treatment of water intended for human consumption. Granular activated carbon
BS EN 12914:1999 BS EN 12914:1999. Products used for treatment of water intended for human consumption. Powdered perlite
BS EN 12913:1999 BS EN 12913:1999. Products used for treatment of water intended for human consumption. Powdered diatomaceous earth
BS EN 12912:1999 BS EN 12912:1999. Products used for treatment of water intended for human consumption. Barite
BS EN 12911:1999 BS EN 12911:1999. Products used for treatment of water intended for human consumption. Manganese greensand
BS EN 12910:1999 BS EN 12910:1999. Products used for treatment of water intended for human consumption. Garnet
BS EN 12909:1999 BS EN 12909:1999. Products used for treatment of water intended for human consumption. Anthracite
BS EN 12907:1999 BS EN 12907:1999. Products used for treatment of water intended for human consumption. Pyrolised coal material
BS EN 12906:1999 BS EN 12906:1999. Products used for treatment of water intended for human consumption. Pumice
BS EN 10132-2:2000 BS EN 10132-2:2000. Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. Case hardening steels
BS EN 12905:1999 BS EN 12905:1999. Products used for treatment of water intended for human consumption. Expanded aluminosilicate
BS EN 12904:1999 BS EN 12904:1999. Products used for treatment of water intended for human consumption. Sand and gravel
BS EN 12903:1999 BS EN 12903:1999. Products used for treatment of water intended for human consumption. Powdered activated carbon
BS EN 12902:1999 BS EN 12902:1999. Products used for treatment of water intended for human consumption. Inorganic supporting and filtering materials. Methods of test
BS EN 12901:1999 BS EN 12901:1999. Products used for treatment of water intended for human consumption. Inorganic supporting and filtering materials. Definitions
BS EN ISO 13406-1:1999 BS EN ISO 13406-1:1999. Ergonomic requirements for work with visual display based on flat panels. Introduction
BS EN 50281-2-1:1999 BS EN 50281-2-1:1999. Electrical apparatus for use in the presence of combustible dust. Test methods. Methods of determining minimum ignition temperatures
KIT 58 KIT 58. Education kit. Packaging
KIT 57 KIT 57. Education kit. Furniture design
KIT 56 KIT 56. Education kit. Food technology
KIT 55 KIT 55. Education kit. Textile standards
KIT 54 KIT 54. Education kit. Workshop standards
BS EN 10132-1:2000 BS EN 10132-1:2000. Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. General
KIT 49 KIT 49. Education kit. Toy safety
BS EN ISO 11091:1999 BS EN ISO 11091:1999. Construction drawings. Landscape drawing practice
PD CR 954-100:1999 PD CR 954-100:1999. Safety of machinery. Safety-related parts of control systems. Guide on the use and application of EN 954-1:1996
BS EN ISO 4957:2000 BS EN ISO 4957:2000. Tool steels
BS EN 12944-2:2000 BS EN 12944-2:2000. Fertilizers and liming materials. Vocabulary. Terms relating to fertilizers
BS EN 12944-1:2000 BS EN 12944-1:2000. Fertilizers and liming materials. Vocabulary. General terms
BS ISO 13794:1999 BS ISO 13794:1999. Ambient air. Determination of asbestos fibres. Indirect-transfer transmission electron microscopy method
BS EN ISO 15606:2000 BS EN ISO 15606:2000. Dental handpieces. Air-powered scalers and scaler tips
BS EN ISO 15098-3:2000 BS EN ISO 15098-3:2000. Dental tweezers. College types
BS 7755-1.4:2000, ISO 11074-4:1999 BS 7755-1.4:2000, ISO 11074-4:1999. Soil quality. Terminology and classification. Terms and definitions related to the rehabilitation of soils and sites. Section 1.4: Terms and definitions related to the rehabilitation of soils and sites
BS EN 12728:2000 BS EN 12728:2000. Surface active agents. Determination of foaming power. Perforated disc beating method
BS ISO 6531:1999 BS ISO 6531:1999. Machinery for forestry. Portable hand-held chain-saws. Vocabulary
BS EN 12229:2000 BS EN 12229:2000. Surfaces for sports areas. Procedure for the preparation of synthetic turf and textile pieces
BS EN 1517:2000 BS EN 1517:2000. Surfaces for sports areas. Determination of resistance to impact
BS EN ISO 15701:1999 BS EN ISO 15701:1999. Leather. Tests for colour fastness. Colour fastness to migration into plasticized poly (vinyl chloride)
BS IEC 60050-651:1999 BS IEC 60050-651:1999. International electrotechnical vocabulary. Live working
BS EN 13095:2000 BS EN 13095:2000. Biotechnology. Performance criteria for off-gas systems
WD/BS5500 : 1997 (TEXT SEP99) WD/BS5500 : 1997 (TEXT SEP99).
BS EN 12243:2000 BS EN 12243:2000. Touch and close fasteners. Determination of dimensional change in washing and drying and dry cleaning
BS EN 12241:2000 BS EN 12241:2000. Touch and close fasteners. Method for closure prior to washing and drying or dry cleaning
BS EN 12242:2000 BS EN 12242:2000. Touch and close fasteners. Determination of peel strength
BS EN 50254:1999 BS EN 50254:1999. High efficiency communication subsystem for small data packages
BS ISO 230-2:1997 BS ISO 230-2:1997. Test code for machine tools. Determination of accuracy and repeatability of positioning of numerically controlled machine tool axes
BS ISO 11860:1999 BS ISO 11860:1999. Textile floor coverings. Jute carpet backing fabric. Specification
BS ISO 14524:1999 BS ISO 14524:1999. Photography. Electronic still-picture cameras. Methods for measuring opto-electronic conversion functions (OECFs)
BS EN ISO 7027:2000, BS 6068-2.13:2000 BS EN ISO 7027:2000, BS 6068-2.13:2000. Water quality. Determination of turbidity
DC99/564654 DC99/564654. Draft British Standard BS ISO 15538 Protective clothing for firefighters - Laboratory test methods and performance requirements for protective clothing with reflective outer surface
BS EN 62005-4:2000, IEC 62005-4:1999 BS EN 62005-4:2000, IEC 62005-4:1999. Reliability of fibre optic interconnecting devices and passive optical components. Product screening
BS EN 60874-1:1999, IEC 60874-1:1999 BS EN 60874-1:1999, IEC 60874-1:1999. Connectors for optical fibres and cables. Generic specification
BS ISO 1112:1999 BS ISO 1112:1999. Horology. Functional and non-functional jewels
BS 3M 45-2:1998, ISO 3324-2:1998 BS 3M 45-2:1998, ISO 3324-2:1998. Aircraft tyres and rims. Test methods for tyres
BS EN 60244-15:2000, IEC 60244-15:1999 BS EN 60244-15:2000, IEC 60244-15:1999. Methods of measurement for radio transmitters. Amplitude-modulated transmitters for sound broadcasting
BS ISO 13476:1997 BS ISO 13476:1997. Road vehicles. Ignition coils. Electrical characteristics and test methods
BS ISO 14656:1999 BS ISO 14656:1999. Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete
BS ISO 14654:1999 BS ISO 14654:1999. Epoxy-coated steel for the reinforcement of concrete
BS EN 10250-3:2000 BS EN 10250-3:2000. Open steel die forgings for general engineering purposes. Alloy special steels
BS EN 10250-4:2000 BS EN 10250-4:2000. Open steel die forgings for general engineering purposes. Stainless steels
BS EN 50123-5:1999 BS EN 50123-5:1999. Railway applications. Fixed installations. d.c. switchgear. Surge arresters and low-voltage limiters for specific use in d.c. systems
BS ISO/IEC 11756:1999 BS ISO/IEC 11756:1999. Information technology. Programming languages. M
PD IEC TS 61231:1999, IEC TS 61231:1999 PD IEC TS 61231:1999, IEC TS 61231:1999. International lamp coding system (ILCOS)
BS ISO 13463:1999 BS ISO 13463:1999. Nuclear-grade plutonium dioxide powder for fabrication of light water reactor MOX fuel. Guidelines to help in the definition of a product specification
BS ISO 10347:1999 BS ISO 10347:1999. Worm gears. Geometry of worms. Name plates for worm gear units, centre distances, information to be supplied to gear manufacturer by the purchaser
BS EN 148-3:1999 BS EN 148-3:1999. Respiratory protective devices: threads for facepieces. Thread connection M 45 x 3
BS EN ISO 1680:2000 BS EN ISO 1680:2000. Acoustics. Test code for the measurement of airborne noise emitted by rotating electrical machinery
BS EN 45510-3-1:2000 BS EN 45510-3-1:2000. Guide for the procurement of power station equipment. Boilers. Water tube boilers. Section 1: Water tube boilers
BS EN 1755:2000 BS EN 1755:2000. Safety of industrial trucks. Operation in potentially explosive atmospheres. Use in flammable gas, vapour, mist and dust
BS ISO 3888-1:1999 BS ISO 3888-1:1999. Passenger cars. Test track for a severe lane-change manoeuvre. Double-lane change
BS EN 1657:2000 BS EN 1657:2000. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants and antiseptics used in veterinary field. Test method and requirements (phase 2/step 1)
BS EN 1656:2000 BS EN 1656:2000. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants used in veterinary field. Test method and requirements (phase 2/step 1)
BS EN 45510-7-2:2000 BS EN 45510-7-2:2000. Guide for the procurement of power station equipment. Pipework and valves. Boiler and high pressure valves. Section 2: Boiler and high pressure valves
BS EN 45510-7-1:2000 BS EN 45510-7-1:2000. Guide for the procurement of power station equipment. Pipework and valves. High pressure piping systems. Section 1: High pressure piping systems
BS EN 45510-6-9:2000 BS EN 45510-6-9:2000. Guide for the procurement of power station equipment. Turbine auxiliaries. Cooling water systems. Section 9: Cooling water systems
BS EN 45510-6-8:2000 BS EN 45510-6-8:2000. Guide for the procurement of power station equipment. Turbine auxiliaries. Cranes. Section 8: Cranes
BS EN 45510-6-6:2000 BS EN 45510-6-6:2000. Guide for the procurement of power station equipment. Turbine auxiliaries. Turbine auxiliaries. Wet and wet/dry cooling towers. Section 6: Wet/dry cooling towers
ISO17933 : 2000 ISO17933 : 2000 . ISO 17933 GEDI - Generic Electronic Document Interchange
DC99/711718 DC99/711718. prEN 4217 Aerospace series - Inserts, thin wall, locked and self-locking, MJ, threads, in heat resisting steel, passivated and MoS2-lubricated -, Classification: 1 100 MPa (at ambient temperature)/315°C -, Istallation and removal procedure
BS EN 45510-6-5:2000 BS EN 45510-6-5:2000. Guide for the procurement of power station equipment. Turbine auxiliaries. Dry cooling systems. Section 5: Dry cooling systems
DC99/711719 DC99/711719. prEN 4589, Aerospace series - Inserts, thin wall, locked and self-locking, MJ, threads, in heat resisting steel, passivated and MoS2-lubricated -, Classification: 1 100 MPa (at ambient temperature)/ 315°C -, Design standard,
BS EN 45510-4-10:2000 BS EN 45510-4-10:2000. Guide for the procurement of power station equipment. Boiler auxiliaries. Flue gas denitrification (De-NOx) plant. Section 10: Flue gas denitrification (De-Nox) plant
BS EN 45510-4-9:2000 BS EN 45510-4-9:2000. Guide for the procurement of power station equipment. Boiler auxiliaries. Sootblowers. Section 9: Sootblowers
BS EN 45510-4-8:2000 BS EN 45510-4-8:2000. Guide for the procurement of power station equipment. Boiler auxiliaries. Dust handling plant. Section 8: Dust handling
BS EN 45510-3-3:2000 BS EN 45510-3-3:2000. Guide for the procurement of power station equipment. Boilers. Boilers with fluidized bed firing. Section 3: Boilers with fluidised bed firing
BS EN 45510-3-2:2000 BS EN 45510-3-2:2000. Guide for the procurement of power station equipment. Boilers. Shell boilers. Section 2: Shell boilers
BS ISO 9587:1999 BS ISO 9587:1999. Metallic and other inorganic coatings. Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
BS ISO 10594:1997 BS ISO 10594:1997. Micrographics. Rotary camera systems. Test target for checking performance
BS ISO 14985:1999 BS ISO 14985:1999. Hard-copy output of engineering drawings. Specification for the structure of control files
BS EN 13527:2000 BS EN 13527:2000. Shutters and blinds. Measurement of operating force. Test methods
BS EN ISO 13938-2:1999 BS EN ISO 13938-2:1999. Textiles. Bursting properties of fabrics. Pneumatic method for determination of bursting strength and bursting distension
BS EN ISO 9241-6:2000 BS EN ISO 9241-6:2000. Ergonomic requirements for office work with visual display terminals (VDTs). Guidance on the work environment
BS EN ISO 13938-1:1999 BS EN ISO 13938-1:1999. Textiles. Bursting properties of fabrics. Hydraulic method for determination of bursting strength and bursting distension
BS ISO 13774:1998 BS ISO 13774:1998. Rubber and plastics hoses for fuels for internal combustion engines. Method of test for flammability
BS EN ISO 4612:1999 BS EN ISO 4612:1999. Plastics. Preparation of PVC pastes for test purposes. Planetary-mixer method
WD/ISO7165 : 1999 WD/ISO7165 : 1999 . ISO 7165 Fire fighting - Portable fire extinguishers - Perfomance and construction
BS EN 50133-7:1999 BS EN 50133-7:1999. Alarm systems. Access control systems for use in security applications. Application guidelines
BS EN 12713:2000 BS EN 12713:2000. Screw cap closure systems for plastics containers with a nominal capacity of 20 L to 60 L
BS EN 12562:1999 BS EN 12562:1999. Textiles. Para-aramid multifilament yarns. Test methods
BS ISO 11359-2:1999 BS ISO 11359-2:1999. Plastics. Thermomechanical analysis (TMA). Determination of coefficient of linear thermal expansion and glass transition temperature
BS ISO 11359-1:1999 BS ISO 11359-1:1999. Plastics. Thermomechanical analysis (TMA). General principles
BS EN 12183:1999 BS EN 12183:1999. Manually propelled wheelchairs. Requirements and test methods
BS EN 12184:1999 BS EN 12184:1999. Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods
BS EN 12838:2000 BS EN 12838:2000. Installations and equipment for liquefied natural gas. Suitability testing of LNG sampling systems
BS EN 12749:1999 BS EN 12749:1999. Footwear. Ageing conditioning
HB 10166:1999 HB 10166:1999. Safety at Work. 5th edition
HB 10165:1999 HB 10165:1999. The Building Regulations Explained & Illustrated. 11th edition
BS EN 12748:1999 BS EN 12748:1999. Footwear. Test methods for outsoles, insoles, linings and insocks. Water soluble content
BS EN 12747:1999 BS EN 12747:1999. Footwear. Test methods for insoles. Abrasion resistance
BS ISO 10294-3:1999 BS ISO 10294-3:1999. Fire-resistance tests. Fire dampers for air distribution systems. Guidance on the test method
BS ISO 10294-2:1999 BS ISO 10294-2:1999. Fire-resistance tests. Fire dampers for air distribution systems. Classification, criteria and field of application of test results
BS EN 12745:1999 BS EN 12745:1999. Footwear. Test methods for insoles. Pin holding strength
DC99/711608 DC99/711608. 99/711608DC Aerospace series, Pipe couplings, 60°, spherical in titanium alloy TI-64001 -, Adapters, straight, double end, with locking ring
BS EN 12744:1999 BS EN 12744:1999. Footwear. Test methods for insoles. Delamination resistance
BS ISO 10767-2:1999 BS ISO 10767-2:1999. Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components. Simplified method for pumps
BS IEC 60300-3-7:1999 BS IEC 60300-3-7:1999. Dependability management. Application guide. Application guide. Reliability stress screening of electronic hardware
BS EN 10278:1999 BS EN 10278:1999. Dimensions and tolerances of bright steel products
BS 499-2C:1999 BS 499-2C:1999. Welding terms and symbols. European arc welding symbols in chart form
BS EN 746-4:2000 BS EN 746-4:2000. Industrial thermoprocessing equipment. Particular safety requirements for hot dip galvanizing thermoprocessing equipment
DD ENV 13321-2:2000 DD ENV 13321-2:2000. Data communication for HVAC application automation net. EIBnet
BS EN ISO 105-B08:1999 BS EN ISO 105-B08:1999. Textiles. Tests for colour fastness. Quality control of blue wool reference materials 1 to 7
BS EN 753-3:1999 BS EN 753-3:1999. Identification card systems. Intersector thin flexible cards. Test methods
BS EN ISO 105-B01:1999 BS EN ISO 105-B01:1999. Textiles. Tests for colour fastness. Colour fastness to light: Daylight
BS EN ISO 105-A04:1999 BS EN ISO 105-A04:1999. Textiles. Tests for colour fastness. Method for the instrumental assessment of the degree of staining of adjacent fabrics
BS ISO 9735-7:1999 BS ISO 9735-7:1999. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Security rules for batch EDI (confidentiality)
BS ISO/IEC 14764:1999 BS ISO/IEC 14764:1999. Information technology. Software maintenance
BS ISO/IEC TR 14471:1999 BS ISO/IEC TR 14471:1999. Information technology. Software engineering. Guidelines for the adoption of CASE tools
BS EN ISO 179-1:1999 BS EN ISO 179-1:1999. Plastics. Determination of Charpy impact properties. Non-instrumented impact test
BS EN 1546-4:1999 BS EN 1546-4:1999. Identification card systems. Inter-sector electronic purse. Data objects
BS EN 1546-3:2000 BS EN 1546-3:2000. Identification card systems. Inter-sector electronic purse. Data elements and interchanges
BS EN 1546-2:2000 BS EN 1546-2:2000. Identification card systems. Inter-sector electronic purse. Security architecture
BS EN 1546-1:1999 BS EN 1546-1:1999. Identification card systems. Inter-sector electronic purse. Definitions, concepts and structures
BS ISO 7789:1998 BS ISO 7789:1998. Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities
BS EN 1332-4:1999 BS EN 1332-4:1999. Identification card systems. Man-machine interface. Coding of user requirements for people with special needs
BS EN 12324-2:1999 BS EN 12324-2:1999. Irrigation techniques. Reel machine systems. Specifications of polyethylene tubes for reel machines
BS EN 12324-3:1999 BS EN 12324-3:1999. Irrigation techniques. Reel machine systems. Presentation of technical characteristics
BS EN 12324-4:1999 BS EN 12324-4:1999. Irrigation techniques. Reel machine systems. Check list of users requirements
BS EN 12325-2:1999 BS EN 12325-2:1999. Irrigation techniques. Centre pivot and moving lateral systems. Minimum performances and technical characteristics
BS EN 12325-3:1999 BS EN 12325-3:1999. Irrigation techniques. Centre pivot and moving lateral systems. Terminology and classification
CWA 13692:1999 CWA 13692:1999. Product and business data harmonisation (PBDH)
CWA 13691:1999 CWA 13691:1999. Message implementation guidelines (MIGs)
BS ISO 14951-1:1999 BS ISO 14951-1:1999. Space systems. Fluid characteristics. Oxygen
BS ISO 14951-2:1999 BS ISO 14951-2:1999. Space systems. Fluid characteristics. Hydrogen propellant
BS ISO 14951-3:1999 BS ISO 14951-3:1999. Space systems. Fluid characteristics. Nitrogen
BS ISO 14951-5:1999 BS ISO 14951-5:1999. Space systems. Fluid characteristics. Nitrogen tetroxide propellant
BS ISO 14951-6:1999 BS ISO 14951-6:1999. Space systems. Fluid characteristics. Monomethylhydrazine propellant
BS ISO 14951-7:1999 BS ISO 14951-7:1999. Space systems. Fluid characteristics. Hydrazine propellant
BS ISO 14951-8:1999 BS ISO 14951-8:1999. Space systems. Fluid characteristics. Kerosene propellant
BS ISO 14951-11:1999 BS ISO 14951-11:1999. Space systems. Fluid characteristics. Ammonia
BS ISO 14951-12:1999 BS ISO 14951-12:1999. Space systems. Fluid characteristics. Carbon dioxide
BS ISO 14951-13:1999 BS ISO 14951-13:1999. Space systems. Fluid characteristics. Breathing air
BS EN 1265:1999 BS EN 1265:1999. Noise test code for foundry machines and equipment
DD ENV 12940:1999 DD ENV 12940:1999. Footwear manufacturing wastes. Waste classification and management
BS EN 13009:2000 BS EN 13009:2000. Hygrothermal performance of building materials and products. Determination of hygric expansion coefficient
BS EN ISO 9241-17:1998 BS EN ISO 9241-17:1998. Ergonomic requirements for office work with visual display terminals (VDTs). Form-filling dialogues
BS EN ISO 10342:1999 BS EN ISO 10342:1999. Ophthalmic instruments. Eye refractometers
BS ISO 13215-2:1999 BS ISO 13215-2:1999. Road vehicles. Reduction of misuse risk of child restraint systems. Requirements and test procedures for correct installation (panel method)
BS EN ISO 5456-3:1999 BS EN ISO 5456-3:1999. Technical drawings. Projection methods. Axonometric representations
BS EN ISO 5456-2:1999 BS EN ISO 5456-2:1999. Technical drawings. Projection methods. Orthographic representations
BS EN ISO 5456-1:1999 BS EN ISO 5456-1:1999. Technical drawings. Projection methods. Synopsis
BS EN 1075:2000 BS EN 1075:2000. Timber structures. Test methods. Joints made with punched metal plate fasteners
BS EN 12760:1999 BS EN 12760:1999. Valves. Socket welding ends for steel valves
BS EN ISO 8662-10:1998 BS EN ISO 8662-10:1998. Hand-held portable power tools. Measurement of vibrations at the handle. Nibblers and shears
BS EN 12351:1999 BS EN 12351:1999. Industrial valves. Protective caps for valves with flanged connections
BS EN 1267:1999 BS EN 1267:1999. Valves. Test of flow resistance using water as a test fluid
BS EN ISO 14031:2000 BS EN ISO 14031:2000. Environmental management. Environmental performance evaluation. Guidelines
BS EN ISO 5845-1:1999 BS EN ISO 5845-1:1999. Technical drawings. Simplified representation of the assemby of parts with fasteners. General principles
BS EN ISO 6428:1999 BS EN ISO 6428:1999. Technical drawings. Requirements for microcopying
BS ISO 830:1999 BS ISO 830:1999. Freight containers. Vocabulary
BS EN 12410:1999 BS EN 12410:1999. Swap bodies. Thermal swap bodies of class A. Dimensions and general requirements
BS EN 12406:1999 BS EN 12406:1999. Swap bodies. Thermal swap bodies of class C. Dimensions and general requirements
BS EN 316:1999 BS EN 316:1999. Wood fibreboards. Definition, classification and symbols
BS EN 12627:1999 BS EN 12627:1999. Industrial valves. Butt welding ends for steel valves
BS EN ISO 8032:1999 BS EN ISO 8032:1999. Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test)
BS EN ISO 5080:1999 BS EN ISO 5080:1999. Sisal agricultural twines
BS EN 13008:2000 BS EN 13008:2000. Steel drums. Removable head (open head) drums with a nominal capacity of 15 l to 62 l
BS EN 13007:2000 BS EN 13007:2000. Steel drums. Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l
BS EN 210:2000 BS EN 210:2000. Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 216,5 l
BS EN 209:2000 BS EN 209:2000. Steel drums. Removable head (open head) drums with a minimum total capacity of 210 l
BS EN 12714:2000 BS EN 12714:2000. Plastics drums. Removable head (open head) drums with a nominal capacity of 25 L to 220 L
CWA 13680:1999 CWA 13680:1999. X.500 profile ADY61. Administrative areas
CWA 13679:1999 CWA 13679:1999. Guidelines for naming in the internet environment
CWA 13678:1999 CWA 13678:1999. Guidelines for naming in the directory
BS EN 12712:2000 BS EN 12712:2000. Plastics jerricans. Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm and 1140 mm x 1140 mm
CWA 13682:1999 CWA 13682:1999. X.500 profile ADY72. Hierarchical operational bindings
BS EN ISO 11116-2:1999 BS EN ISO 11116-2:1999. Gas cylinders. 17E taper thread for connection of valves to gas cylinders. Inspection gauges
BS EN 12711:2000 BS EN 12711:2000. Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 230 l
BS ISO 14849:1999 BS ISO 14849:1999. Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Indophenol method
BS EN 12708:2000 BS EN 12708:2000. Plug/bung closure systems for plastics containers with a nominal capacity of 20 l to 225 l
BS EN ISO 9431:1999 BS EN ISO 9431:1999. Construction drawings. Spaces for drawing and for text, and title blocks on drawing sheets
BS EN ISO 5261:1999 BS EN ISO 5261:1999. Technical drawings. Simplified representation of bars and profile sections
BS ISO 11561:1999 BS ISO 11561:1999. Ageing of thermal insulation materials. Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
BS EN ISO 505:2000 BS EN ISO 505:2000. Conveyor belts. Method for the determination of the tear propagation resistance of textile conveyor belts
PD 6639:1999 PD 6639:1999. PNO-ISC specification number 005. C7 interconnect message transfer part (MTP)
BS ISO 14898:1999 BS ISO 14898:1999. Plastics. Polyurethane raw materials. Aromatic isocyanates. Determination of acidity
BS EN ISO 105-Z10:1999 BS EN ISO 105-Z10:1999. Textiles. Tests for colour fastness. Determination of relative colour strength of dyes in solution
Standards for schools and colleges Standards for schools and colleges. Compendium of essential design and technology standards for schools and colleges
BS ISO 603-16:1999 BS ISO 603-16:1999. Bonded abrasive products. Dimensions. Grinding wheels for cutting-off on hand-held power tools
BS ISO 603-15:1999 BS ISO 603-15:1999. Bonded abrasive products. Dimensions. Grinding wheels for cutting-off on stationary or mobile cutting-off machines
BS ISO 603-14:1999 BS ISO 603-14:1999. Bonded abrasive products. Dimensions. Grinding wheels for deburring and fettling/snagging on an angle grinder
BS ISO 603-13:1999 BS ISO 603-13:1999. Bonded abrasive products. Dimensions. Grinding wheels for deburring and fettling on a vertical grinder
BS ISO 603-12:1999 BS ISO 603-12:1999. Bonded abrasive products. Dimensions. Grinding wheels for deburring and fettling on a straight grinder
BS ISO 603-11:1999 BS ISO 603-11:1999. Bonded abrasive products. Dimensions. Hand finishing sticks
BS ISO 603-10:1999 BS ISO 603-10:1999. Bonded abrasive products. Dimensions. Stones for honing and superfinishing
BS ISO 603-9:1999 BS ISO 603-9:1999. Bonded abrasive products. Dimensions. Grinding wheels for high pressure grinding
BS ISO 603-8:1999 BS ISO 603-8:1999. Bonded abrasive products. Dimensions. Grinding wheels for deburring and fettling/snagging
BS ISO 603-7:1999 BS ISO 603-7:1999. Bonded abrasive products. Dimensions. Grinding wheels for manually guided grinding
BS ISO 603-6:1999 BS ISO 603-6:1999. Bonded abrasive products. Dimensions. Grinding wheels for tool and toolroom grinding
BS ISO 603-5:1999 BS ISO 603-5:1999. Bonded abrasive products. Dimensions. Grinding wheels for surface grinding/face grinding
BS ISO 603-4:1999 BS ISO 603-4:1999. Bonded abrasive products. Dimensions. Grinding wheels for surface grinding/peripheral grinding
BS ISO 603-3:1999 BS ISO 603-3:1999. Bonded abrasive products. Dimensions. Grinding wheels for internal cylindrical grinding
BS ISO 603-2:1999 BS ISO 603-2:1999. Bonded abrasive products. Dimensions. Grinding wheels for centreless external cylindrical grinding
BS ISO 603-1:1999 BS ISO 603-1:1999. Bonded abrasive products. Dimensions. Grinding wheels for external cylindrical grinding between centres
BS EN 12353:2000 BS EN 12353:2000. Chemical disinfectants and antiseptics. Preservation of microbial strains used for the determination of bactericidal and fungicidal activity
BS EN 60068-2-74:2000, IEC 60068-2-74:1999 BS EN 60068-2-74:2000, IEC 60068-2-74:1999. Environmental testing. Test methods. Test Xc: Fluid contamination
BS CECC 299001:1999, CECC 2990001:1999 BS CECC 299001:1999, CECC 2990001:1999. Technology approval schedule. Manufacture of electrical connectors
BS EN ISO 140-12:2000 BS EN ISO 140-12:2000. Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor
BS ISO/IEC TR 15285:1998 BS ISO/IEC TR 15285:1998. Information technology. An operational model for characters and glyphs
BS EN 12786:1999 BS EN 12786:1999. Safety of machinery. Guidance for the drafting of vibration clauses of safety standards
BS ISO 16107:1999 BS ISO 16107:1999. Workplace atmospheres. Protocol for evaluating the performance of diffusive samplers
BS ISO/IEC 13248-4:1998 BS ISO/IEC 13248-4:1998. Information technology. Open systems interconnection. The directory. Protocol implementation conformance statement (PICS) proforma for the directory information shadowing protocol
BS EN ISO 11539:1999 BS EN ISO 11539:1999. Ophthalmic optics. Contact lenses. Classification and contact lens materials
BS EN 893:1999 BS EN 893:1999. Mountaineering equipment. Crampons. Safety requirements and test methods
PD CR 13436:1999, CR 13436:1998 PD CR 13436:1999, CR 13436:1998. Geographic information. Vocabulary
PD CR 13425:1999, CR 13425:1998 PD CR 13425:1999, CR 13425:1998. Geographic information. Overview
BS ISO/IEC 7816-2:1999 BS ISO/IEC 7816-2:1999. Identification cards. Integrated circuit(s) cards with contacts. Dimensions and location of the contacts
BS ISO/IEC 6523-2:1998 BS ISO/IEC 6523-2:1998. Information technology. Structure for the identification of organizations and organization parts. Registration of organization identification schemes
BS ISO 14691:1999 BS ISO 14691:1999. Petroleum and natural gas industries. Flexible couplings for mechanical power transmission. General purpose applications
DC99/703374 DC99/703374. Draft British standard ISO 5944 Milk and milk products - Enumeration of coagulase-positive staphylococci - Most probable number technique
BS EN ISO 9283:1998 BS EN ISO 9283:1998. Manipulating industrial robots. Performance criteria and related test methods
BS EN ISO 5198:1999 BS EN ISO 5198:1999. Centrifugal, mixed flow and axial pumps. Code for hydraulic performance tests. Precision class
DC99/122370
BS EN ISO 1737:2000, BS 1742-3:2000 BS EN ISO 1737:2000, BS 1742-3:2000. Evaporated milk and sweetened condensed milk. Determination of fat content. Gravimetric method (Reference method)
BS ISO/IEC 7816-7:1999 BS ISO/IEC 7816-7:1999. Identification cards. Integrated circuit(s) cards with contacts. Interindustry commands for structured cards query language (SCQL)
BS EN ISO 7328:2000, BS 2472-3:2000 BS EN ISO 7328:2000, BS 2472-3:2000. Milk based edible ices and ice mixes. Determination of fat content. Gravimetric method (Reference method)
BS ISO 5024:1999 BS ISO 5024:1999. Petroleum liquids and liquefied petroleum gases. Measurement. Standard reference conditions
BS ISO/IEC 10373-5:1998 BS ISO/IEC 10373-5:1998. Identification cards. Test methods. Optical memory cards
PD 6661:1999 PD 6661:1999. Market study and overview of standardization for road transport and traffic telematics
BS 5223-2:1999 BS 5223-2:1999. Specification for hospital bedding. Combustion modified, flexible polyurethane, general purpose foam mattress cores. Specification
BS ISO/IEC 10373-2:1998 BS ISO/IEC 10373-2:1998. Identification cards. Test methods. Cards with magnetic stripes
BS ISO/IEC 10373-1:1998 BS ISO/IEC 10373-1:1998. Identification cards. Test methods. General characteristics tests
BS ISO/IEC 13235-3:1998 BS ISO/IEC 13235-3:1998. Information technology. Open distributed processing. Trading function. Provision of trading function using OSI Directory service
BS ISO 5894:1999 BS ISO 5894:1999. Ships and marine technology. Manholes with bolted covers
BS ISO/IEC 13235-1:1998 BS ISO/IEC 13235-1:1998. Information technology. Open distributed processing. Trading function. Specification
PD CR 13456:1999 PD CR 13456:1999. Soil improvers and growing media. Labelling, specifications and product schedules
BS ISO/IEC 10746-4:1998 BS ISO/IEC 10746-4:1998. Information technology. Open distributed processing. Reference model. Architectural semantics
BS ISO/IEC 10746-1:1998 BS ISO/IEC 10746-1:1998. Information technology. Open distributed processing. Reference model. Overview
BS ISO/IEC TR 15271:1998 BS ISO/IEC TR 15271:1998. Information technology. Guide for ISO/IEC 12207. (Software life cycle processes)
BS ISO/IEC TR 12182:1998 BS ISO/IEC TR 12182:1998. Information technology. Categorization of software
BS ISO/IEC TR 15846:1998 BS ISO/IEC TR 15846:1998. Information technology. Software life cycle processes. Configuration management
BSEN ISO 15702:2000 BSEN ISO 15702:2000. Leather. Tests for colour fastness. Colour fastness to machine washing
BS EN ISO 15700:1999 BS EN ISO 15700:1999. Leather. Tests for colour fastness. Colour fastness to water spotting
PD CR 12660:1999, CR 12660:1998 PD CR 12660:1999, CR 12660:1998. Geographic information. Processing. Query and update: spatial aspects
BS 812-123:1999 BS 812-123:1999. Testing aggregates. Method for determination of alkali-silica reactivity. Concrete prism method
DD ENV 12656:1999 DD ENV 12656:1999. Geographic information. Data description. Quality
DD ENV 12657:1999 DD ENV 12657:1999. Geographic information. Data description. Metadata
BS EN ISO 2450:1999 BS EN ISO 2450:1999. Cream. Determination of fat content (Reference method)
DD ENV 12762:1999 DD ENV 12762:1999. Geographic information. Referencing. Direct position
DD ENV 12661:1999 DD ENV 12661:1999. Geographic information. Referencing. Geographic identifiers
DD ENV 12658:1999 DD ENV 12658:1999. Geographic information. Data description. Transfer
BS EN 1332-3:1999 BS EN 1332-3:1999. Identification card systems. Man-machine interface. Key pads
BS 2A 295:2000, ISO 7481:2000 BS 2A 295:2000, ISO 7481:2000. Nuts, self-locking, with maximum operating temperature less than or equal to 425°C. Test methods
BS A 360:2000, ISO 12280:1999 BS A 360:2000, ISO 12280:1999. Retainers, spring, sheet metal, for self-locking barrel nuts. Dimensions
BS A 359:2000, ISO 12278:1999 BS A 359:2000, ISO 12278:1999. Nuts, barrel, self-locking, floating, with MJ threads, classifications. 900 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/235°C, 1250 MPa (at ambient temperature)/235°C, 1550 MPa (at ambient temperature)/235°C. Dimensions
BS EN ISO 14402:1999, BS 6068-2.68:1999 BS EN ISO 14402:1999, BS 6068-2.68:1999. Water quality. Determination of phenol index by flow analysis (FIA and CFA)
BS EN 12918:1999, BS 6068-2.67:1999 BS EN 12918:1999, BS 6068-2.67:1999. Water quality. Determination of parathion, parathion-methyl and some other organophosphorus compounds in water by dichloromethane extraction and gas chromatographic analysis
BS EN 741:2000 BS EN 741:2000. Continuous handling equipment and systems. Safety requirements for systems and their components for pneumatic handling of bulk materials
BS EN ISO 9408:1999, BS 6068-5.11:1999 BS EN ISO 9408:1999, BS 6068-5.11:1999. Water quality. Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer
BS ISO 1834:1999 BS ISO 1834:1999. Short link chain for lifting purposes. General conditions of acceptance
BS ISO 1051:1999 BS ISO 1051:1999. Rivet shank diameters
BS ISO 10955:1999 BS ISO 10955:1999. End-fittings and turnbarrels for aircraft control wire rope. Technical specification
BS ISO 3507:1999 BS ISO 3507:1999. Laboratory glassware. Pyknometers
BS EN 1097-8:2000 BS EN 1097-8:2000. Tests for mechanical and physical properties of aggregates. Determination of the polished stone value
BS EN 848-3:1999 BS EN 848-3:1999. Safety of woodworking machines. One side moulding machines with rotating tool. Numerical control (NC) boring machines and routing machines
BS EN 13040:2000 BS EN 13040:2000. Soil improvers and growing media. Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
BS EN 13039:2000 BS EN 13039:2000. Soil improvers and growing media. Determination of organic matter content and ash
BS EN 13038:2000 BS EN 13038:2000. Soil improvers and growing media. Determination of electrical conductivity
BS EN 1807:1999 BS EN 1807:1999. Safety of woodworking machines. Band sawing machines
BS EN 1218-1:1999 BS EN 1218-1:1999. Safety of woodworking machines. Tenoning machines. Single end tenoning machines with sliding table
BS EN 303-6:2000 BS EN 303-6:2000. Heating boilers. Heating boilers with forced draught burners. Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW
BS EN 60264-3-5:1999, IEC 60264-3-5:1999 BS EN 60264-3-5:1999, IEC 60264-3-5:1999. Packaging of winding wires. Taper barrelled delivery spools. Specification for spool containers made from thermoplastic material
BS EN 13037:2000 BS EN 13037:2000. Soil improvers and growing media. Determination of pH
BS EN 1827:1999 BS EN 1827:1999. Respiratory protective devices. Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only. Requirements, testing, marking
BS EN ISO 14911:1999 BS EN ISO 14911:1999. Water quality. Determination of dissolved Li+, Na4+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography. Method for water and waste water
BS 6068-6.15:1999, ISO 5667-15:1999 BS 6068-6.15:1999, ISO 5667-15:1999. Water quality. Sampling. Guidance on preservation and handling of sludge and sediment samples
BS EN 50178:1998 BS EN 50178:1998. Electronic equipment for use in power installations
BS 7927:1998 BS 7927:1998. Heating appliances for domestic applications. Portable apparatus designed to detect and measure specific combustion flue gas products. Requirements
BS EN 13068-2:2000 BS EN 13068-2:2000. Non-destructive testing. Radioscopic testing. Check of long term stability of imaging devices
BS EN 13068-1:2000 BS EN 13068-1:2000. Non-destructive testing. Radioscopic testing. Quantitative measurement of imaging properties
BS EN 12223:2000 BS EN 12223:2000. Non-destructive testing. Ultrasonic examination. Specification for calibration block No.1
BS EN ISO 11979-1:2000 BS EN ISO 11979-1:2000. Ophthalmic implants. Intraocular lenses. Vocabulary
BS EN ISO 11984:2000 BS EN ISO 11984:2000. Ophthalmic optics. Contact lenses. Determination of rigid lens flexure and breakage
BS ISO 11979-3:1999 BS ISO 11979-3:1999. Ophthalmic implants. Intraocular lenses. Mechanical properties and test methods
BS 7966:2000 BS 7966:2000. Recommendations for design of cork removal devices
BS EN 61280-4-2:2000, IEC 61280-4-2:1999 BS EN 61280-4-2:2000, IEC 61280-4-2:1999. Fibre optic communication subsystem basic test procedures. Fibre optic cable plant. Single-mode fibre optic cable plant attenuation
PD 6645:1999
BS EN 12710:2000 BS EN 12710:2000. Fibreboard drums. Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l
BS EN 60317-50:2000, IEC 60317-50:1999 BS EN 60317-50:2000, IEC 60317-50:1999. Specifications for particular types of winding wires. Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200
BS EN 60317-49:2000, IEC 60317-49:1999 BS EN 60317-49:2000, IEC 60317-49:1999. Specifications for particular types of winding wires. Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180
BS EN 60317-48:2000, IEC 60317-48:1999 BS EN 60317-48:2000, IEC 60317-48:1999. Specifications for particular types of winding wires. Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155
BS EN 60317-27:1998, IEC 60317-27:1998 BS EN 60317-27:1998, IEC 60317-27:1998. Specifications for particular types of winding wires. Paper tape covered rectangular copper wire
BS EN 60317-11:2000, IEC 60317-11:1999 BS EN 60317-11:2000, IEC 60317-11:1999. Specifications for particular types of winding wires. Bunched solderable polyurethane enamelled round copper wires, class 130, with silk covering
BS EN 1569:1999 BS EN 1569:1999. Surfaces for sports areas. Determination of the behaviour under a rolling load
QPL 9002:1999 QPL 9002:1999. Register of firms, products and services approved under the BS 9000 system
BS ISO 11076:2000 Edition 1 BS ISO 11076:2000 Edition 1. Aircraft de-icing/anti-icing methods with fluids
BS EN 10246-14:2000 BS EN 10246-14:2000. Non-destructive testing of steel tubes. Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections
DISC PD 0013:1999 DISC PD 0013:1999. Records management. A guide to disaster prevention and recovery
BS EN 10246-8:2000 BS EN 10246-8:2000. Non-destructive testing of steel tubes. Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
BS EN 10246-6:2000 BS EN 10246-6:2000. Non-destructive testing of steel tubes. Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections
BS EN 12755:2000 BS EN 12755:2000. Transportable gas cylinders. Filling conditions for acetylene bundles
BS ISO/IEC 16390:1999 BS ISO/IEC 16390:1999. Information technology. Automatic identification and data capture techniques. Bar code symbology specifications. Interleaved 2 of 5
BS ISO 12151-1:1999 BS ISO 12151-1:1999. Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 8434-3 O-ring face-seal ends
BS ISO 11943:1999 BS ISO 11943:1999. Hydraulic fluid power. On-line automatic particle-counting systems for liquids. Methods of calibration and validation
BS ISO 15171-1:1999 BS ISO 15171-1:1999. Connections for fluid power and general use. Hydraulic couplings for diagnostic purposes. Coupling not for connection under pressure
BS ISO 8764-1:1999 BS ISO 8764-1:1999. Assembly tools for screws and nuts. Screwdrivers for cross-recessed head screws. Driver points
BS ISO 11727:1999 BS ISO 11727:1999. Pneumatic fluid power. Identification of ports and control mechanisms of control valves and other components
BS ISO/IEC 6523-1:1998 BS ISO/IEC 6523-1:1998. Information technology. Structure for the identification of organizations and organization parts. Identification of organization identification schemes
KIT 13 KIT 13. Management services set
BS EN 12919:1999 BS EN 12919:1999. Workplace atmospheres. Pumps for the sampling of chemical agents with a volume flow rate of over 51/min. Requirements and test methods
BS ISO 11408:1999 BS ISO 11408:1999. Chemical conversion coatings. Black oxide coating on iron and steel. Specification and test methods
BS EN 12580:2000 BS EN 12580:2000. Soil improvers and growing media. Determination of a quantity
BS EN 10254:1999 BS EN 10254:1999. Steel closed die forgings. General technical delivery conditions
BS ISO 3166-3:1999 BS ISO 3166-3:1999. Codes for the representation of names of countries and their subdivisions. Code for formerly used names of countries
BS EN ISO 683-17:1999 BS EN ISO 683-17:1999. Heat-treated steels, alloy steels and free-cutting steels. Ball and roller bearing steels
BS EN 4179:2000 BS EN 4179:2000. Qualification and approval of personnel for non-destructive testing
BS EN ISO 7085:1999 BS EN ISO 7085:1999. Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
BS EN ISO 15330:1999 BS EN ISO 15330:1999. Fasteners. Preloading test for the detection of hydrogen embrittlement. Parallel bearing surface method
BS EN 12579:2000 BS EN 12579:2000. Soil improvers and growing media. Sampling
BS W 14:1999, ISO 9763:1999 BS W 14:1999, ISO 9763:1999. Aircraft control wire rope assemblies. Technical specification
BS EN ISO 10510:2000 BS EN ISO 10510:2000. Tapping screw and washer assemblies with plain washers
BS EN ISO 15482:1999 BS EN ISO 15482:1999. Cross recessed countersunk head drilling screws with tapping screw thread
BS EN ISO 15481:1999 BS EN ISO 15481:1999. Cross recessed pan head drilling screws with tapping screw thread
BS 5381-5:1999, ISO 6565:1999 BS 5381-5:1999, ISO 6565:1999. Methods for determination of physical properties of tobacco and tobacco products. Draw resistance of cigarettes and pressure drop of filter rods
DISC PD 1999-1:1998 DISC PD 1999-1:1998. Guidance on readiness for euro business
BS ISO 7278-4:1999 BS ISO 7278-4:1999. Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric meters. Guide for operators of pipe provers
BS ISO 4037-3:1999 BS ISO 4037-3:1999. X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy. Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence
BS EN ISO 13997:1999 BS EN ISO 13997:1999. Protective clothing. Mechanical properties. Determination of resistance to cutting by sharp objects
BS ISO/IEC 15897:1999 BS ISO/IEC 15897:1999. Information technology. Procedures for registration of cultural elements
BS ISO/IEC 15068-2:1999 BS ISO/IEC 15068-2:1999. Information technology. Portable operating system interface (POSIX) system administration. Software administration
DD ENV 12506:2000 DD ENV 12506:2000. Characterization of waste. Analysis of eluates. Determination of pH, As, Cd, Cr VI, Cu, Ni, Pb, Zn, Cl-, NO2-, SO42-
BS ISO 6549:1999 BS ISO 6549:1999. Road vehicles. Procedure for H- and R-point determination
BS ISO/IEC 13248-3:1998 BS ISO/IEC 13248-3:1998. Information technology. Open systems interconnection. The directory. Protocol implementation conformance statement (PICS) proforma for the directory operational binding management protocol
BS ISO 3287:1999 BS ISO 3287:1999. Powered industrial trucks. Symbols for operator controls and other displays
BS EN 1567:2000 BS EN 1567:2000. Building valves. Water pressure reducing valves and combination water reducing valves. Requirements and tests
BS ISO/IEC 9798-5:1999 BS ISO/IEC 9798-5:1999. Information technology. Security techniques. Entity authentication mechanisms. Mechanisms using zero knowledge techniques
PD 6657:1999 PD 6657:1999. PNO-ISC information document 011. Core INAP CS-1 extensions for UK use
PD 6658:1999 PD 6658:1999. PNO-ISC information document 013. Recommendations for non-circuit related signalling to support service provider access interface
BS EN ISO 4672:1999 BS EN ISO 4672:1999. Rubber and plastics hoses. Sub-ambient temperature flexibility tests

BIS Standards Catalogue