BIS Standards Catalogue

BS AU 206-2:1986, ISO 7639-1985 BS AU 206-2:1986, ISO 7639-1985. Diagnostic systems for road vehicles. Specification for graphical symbols for diagnostic testers
BS AU 206-3:1986, ISO 7342-1982 BS AU 206-3:1986, ISO 7342-1982. Diagnostic systems for road vehicles. Specification for general requirements for testing ignition systems
BS AU 206-4:1986, ISO 8093-1985 BS AU 206-4:1986, ISO 8093-1985. Diagnostic systems for road vehicles. Specification for general requirements for testing electronic systems
BS 770-1:1986 BS 770-1:1986. Methods for chemical analysis of cheese. General introduction
BS 3071:1986 BS 3071:1986. Specification for nickel-copper alloy castings
BS 3487:Part 3:1986, ISO 5361/3-1984 BS 3487:Part 3:1986, ISO 5361/3-1984. Tracheal tubes. Specification for tubes of the Murphy type
BS 3487:Part 5:1986, ISO 5361/5-1984 BS 3487:Part 5:1986, ISO 5361/5-1984. Tracheal tubes. Specification and methods of test for tube collapse and cuff herniation
BS 5755:1986 BS 5755:1986. Specification for dimensions of basic features of fluid power cylinders
BS 6100-1.7.1:1986 BS 6100-1.7.1:1986. Glossary of building and civil engineering terms. General and miscellaneous. Characteristics and performance. Performance
BS 6685:1986, ISO 7131-1984 BS 6685:1986, ISO 7131-1984. Glossary of terms for loaders used for earth-moving
BS 6688:1986 BS 6688:1986. Method for specifying requirements for low voltage power supplies, switching type, d.c. output
DD 139:1986 DD 139:1986. Specification for zinc-aluminium alloy ingots and castings
BS MA 49:1986 BS MA 49:1986. Summary and application of carbon steel tubes for marine pipework systems
BS 1000[62/62-9]:1986 BS 1000[62/62-9]:1986. Universal Decimal Classification. English full edition. Engineering, technology in general. Characteristics and details of machines, equipment, plant, processes and products
BS 1881-201:1986 BS 1881-201:1986. Testing concrete. Guide to the use of non-destructive methods of test for hardened concrete
BS 1881-202:1986 BS 1881-202:1986. Testing concrete. Recommendations for surface hardness testing by rebound hammer
BS 6474:Part 4:1986, ISO 5427-1984 BS 6474:Part 4:1986, ISO 5427-1984. Coded character sets for bibliographic information interchange. Specification for extension of the Cyrillic alphabet coded character set
BS 8220-1:1986 BS 8220-1:1986. Guide for security of buildings against crime. Dwellings
BS 3248:1986 BS 3248:1986. Specification for sparkguards for use with solid fuel appliances
BS 4887-1:1986 BS 4887-1:1986. Mortar admixtures. Specification for air-entraining (plasticizing) admixtures
BS 410:1986 BS 410:1986. Specification for test sieves
BS 6659:Part 1:1986 BS 6659:Part 1:1986. Producing and assessing changes in surface structure and colour of textile floor coverings. Method for assessment of the changes
BS 6659-2:1986 BS 6659-2:1986. Producing and assessing changes in surface structure and colour of textile floor coverings. Method for fatiguing using the hexapod tumbler tester
BS 3417-3:1986 BS 3417-3:1986. Power take-off shafts and guards for tractors and machinery for agriculture and forestry. Supplementary requirements to Part 1. 'Specification for power take-off drive shafts' and to Part 2. 'Methods for testing guards'
BS 5306-4:1986 BS 5306-4:1986. Fire extinguishing installations and equipment on premises. Specification for carbon dioxide systems
BS 3592-1:1986 BS 3592-1:1986. Steel wire for hose reinforcement. Specification for coated round and flat steel wire for rubber hose reinforcement
BS 6057-3.19:1986, ISO 4655-1985 BS 6057-3.19:1986, ISO 4655-1985. Rubber latices. Methods of test. Determination of total bound styrene content of reinforced styrene-butadiene rubber latices
BS 8103:Part 1:1986 BS 8103:Part 1:1986. Structural design of low-rise buildings. Code of practice for stability, site investigation, foundations and ground floor slabs for housing
BS MA 60:1986 BS MA 60:1986. Summary and application of copper and copper alloy tubes for ships' pipework systems
BS 6493-1.3:1986, IEC 60747-3:1985 BS 6493-1.3:1986, IEC 60747-3:1985. Semiconductor devices. Discrete devices. Recommendations for signal (including switching) and regulator diodes
BS 6693-1:1986 BS 6693-1:1986. Diffusible hydrogen. Method for determination of hydrogen in manual metal-arc weld metal using 3 day collection
BS 6693-2:1986 BS 6693-2:1986. Diffusible hydrogen. Method for determination of hydrogen in manual metal-arc weld metal
BS 1000[655]:1986 BS 1000[655]:1986. Universal Decimal Classification. English full edition. Graphic industries. Printing. Publishing. Book trade
BS 1189:1986 BS 1189:1986. Specification for baths made from porcelain enamelled cast iron
BS 6697:1986 BS 6697:1986. Methods of test for electrohydraulic proportional control valves
BS EN 60804:1994, IEC 60804:1985 BS EN 60804:1994, IEC 60804:1985. Specification for integrating-averaging sound level meters
BS 6691-2:1986 BS 6691-2:1986. Fume from welding and allied processes. Guide to methods for the sampling and analysis of gases
BS 1389:1986 BS 1389:1986. Specification for hose connections and hose assemblies for equipment for gas welding, cutting and related processes
BS 3056-3:1986 BS 3056-3:1986. Sizes of refractory bricks. Specification for bricks for rotary cement kilns
BS 5736/2PRS:1986 BS 5736/2PRS:1986. Evaluation of medical devices for biological hazards. Positive control plastic reference standard for implantation
BS 6494:Part 2:1986 BS 6494:Part 2:1986. Hydraulic fluid power valve mounting surfaces. Specification for four-port and five-port servo-valves
BS 6691-1:1986 BS 6691-1:1986. Fume from welding and allied processes. Guide to methods for the sampling and analysis of particulate matter
BS CECC 30900:1986 BS CECC 30900:1986. Harmonized system of quality assessment for electronic components. Sectional specification: fixed polystyrene film dielectric metal foil d.c. capacitors
BS 5736:Part 9:1986 BS 5736:Part 9:1986. Evaluation of medical devices for biological hazards. Method of test for eye irritation
BS 6690:1986, ISO 8211-1985 BS 6690:1986, ISO 8211-1985. Specification for a data descriptive file for information interchange
BS 4979:1986 BS 4979:1986. Methods for aerodynamic testing of constant and variable dual or single duct boxes, single duct units and induction boxes for air distribution systems
BS 6100-3.1:1986 BS 6100-3.1:1986. Glossary of building and civil engineering terms. Services. Energy sources and distribution
BS 697:1986 BS 697:1986. Specification for rubber gloves for electrical purposes
Energy design guide:1985 Energy design guide:1985. Design guide to BS 8207:1985, British Standard code of practice for energy efficiency in buildings
BS 1743-1:1986 BS 1743-1:1986. Methods for analysis of dried milk and dried milk products. General introduction, including preparation of laboratory samples
BS 6707:1986 BS 6707:1986. Specification for intruder alarm systems for consumer installation
BS 9753:1986 BS 9753:1986. Sectional specification for variable r.f. type inductors of assessed quality for use in electronic equipment for capability approval
BS 9741:1986 BS 9741:1986. Sectional specification for inductors of assessed quality for use in electronic equipment for capability approval
BS 2548:1986 BS 2548:1986. Specification for wood wool for general packaging purposes
BS 3415:1986 BS 3415:1986. Specification for venetian blinds
BS 6648:1986 BS 6648:1986. Methods for wet ashing of textile materials for subsequent determination of metal content
BS 5752-8:1986, ISO 6667-1985 BS 5752-8:1986, ISO 6667-1985. Methods of test for coffee and coffee products. Green coffee: determination of proportion of insect-damaged beans
BS 5752:Part 9:1986, ISO 7534-1985 BS 5752:Part 9:1986, ISO 7534-1985. Methods of test for coffee and coffee products. Instant coffee: determination of insoluble matter content
BS 5752-10:1986, ISO 7532-1985 BS 5752-10:1986, ISO 7532-1985. Methods of test for coffee and coffee products. Instant coffee: size analysis
BS 4285-3.1:1986 BS 4285-3.1:1986. Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Enumeration of psychrotrophic microorganisms
BS 4285-3.6:1986 BS 4285-3.6:1986. Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Enumeration of yeasts and moulds
BS 4255-1:1986 BS 4255-1:1986. Rubber used in preformed gaskets for weather exclusion from buildings. Specification for non-cellular gaskets
BS 6068:Part 6:Section 6.3:1986, ISO 5667/3-1985 BS 6068:Part 6:Section 6.3:1986, ISO 5667/3-1985. Water quality. Sampling. Guidance on the preservation and handling of samples
BS 4508-1:1986 BS 4508-1:1986. Thermally insulated underground pipelines. Specification for steel cased systems with air gap
BS 4844:1986 BS 4844:1986. Specification for abrasion resisting white cast iron
BS 4937:Part 8:1986 BS 4937:Part 8:1986. International thermocouple reference tables. Nickel-chromium-silicon/nickel-silicon thermocouples including composition Type N
BS 122-5:1986 BS 122-5:1986. Milling cutters. Specification for mounting dimensions and accessories
BS 143 & 1256:1986 BS 143 & 1256:1986. Specification for malleable cast iron and cast copper alloy threaded pipe fittings
BS 3468:1986 BS 3468:1986. Specification for austenitic cast iron
BS 4531:1986 BS 4531:1986. Specification for portable and mobile troughed belt conveyors
BS 6681:1986 BS 6681:1986. Specification for malleable cast iron
BS 6386-1:1986, ISO 5414-1:1985 BS 6386-1:1986, ISO 5414-1:1985. Tool chucks with clamp screws for flatted parallel shanks. Specification for dimensions of chuck nose
BS 5215:1986 BS 5215:1986. Specification for one-part gun grade polysulphide-based sealants
BS 6670-1:1986, ISO 4524-1:1985 BS 6670-1:1986, ISO 4524-1:1985. Methods of test for electroplated gold and gold alloy coatings. Determination of coating thickness
BS EN ISO 4524-3:1995 BS EN ISO 4524-3:1995. Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Electrographic tests for porosity
BS 6670-5:1986, ISO 4524-5:1985 BS 6670-5:1986, ISO 4524-5:1985. Methods of test for electroplated gold and gold alloy coatings. Adhesion tests
BS 6669-1:1986, ISO 4522-1:1985 BS 6669-1:1986, ISO 4522-1:1985. Methods of test for electroplated silver and silver alloy coatings. Determination of coating thickness
BS 6669-2:1986, ISO 4522-2:1985 BS 6669-2:1986, ISO 4522-2:1985. Methods of test for electroplated silver and silver alloy coatings. Adhesion tests
BS 6670-4:1986, ISO 4524-4:1985 BS 6670-4:1986, ISO 4524-4:1985. Methods of test for electroplated gold and gold alloy coatings. Determination of gold content
BS 4737-2:1986 BS 4737-2:1986. Intruder alarm systems. Specification for installed systems for deliberate operation
BS 4737-3.14:1986 BS 4737-3.14:1986. Intruder alarm systems. Specifications for components. Specification for deliberately-operated devices
BS 4737-3.30:1986 BS 4737-3.30:1986. Intruder alarm systems. Specifications for components. Specification for PVC insulated cables for interconnecting wiring
BS 6668-1:1986 BS 6668-1:1986. Textile lifting slings. Specification for lifting slings for general service made from certain natural and man-made fibre ropes
BS 6670-2:1986, ISO 4524/2-1985 BS 6670-2:1986, ISO 4524/2-1985. Methods of test for electroplated gold and gold alloy coatings. Environmental tests
BS EN 20287:1994, ISO 287:1985 BS EN 20287:1994, ISO 287:1985. Paper and board. Determination of moisture content. Oven-drying method
BS 1415-2:1986 BS 1415-2:1986. Mixing valves. Specification for thermostatic mixing valves
BS 3430:1986, ISO 186-1985 BS 3430:1986, ISO 186-1985. Method for sampling to determine the average quality of paper and board
BS 4727-2:Group 11:1986 BS 4727-2:Group 11:1986. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Generation, transmission and distribution of electricity terminology
BS 3837-1:1986 BS 3837-1:1986. Expanded polystyrene boards. Specification for boards manufactured from expandable beads
BS 3927:1986 BS 3927:1986. Specification for rigid phenolic foam (PF) for thermal insulation in the form of slabs and profiled sections
BS EN 22233:1993, ISO 2233:1986 BS EN 22233:1993, ISO 2233:1986. Complete, filled transport packages. Method of conditioning for testing
BS EN 22244:1993, ISO 2244:1985 BS EN 22244:1993, ISO 2244:1985. Complete, filled transport packages. Method for determination of resistance to horizontal impact
BS EN 22875:1993, ISO 2875:1985 BS EN 22875:1993, ISO 2875:1985. Complete, filled transport packages. Method for determination of resistance to water spray
BS EN 22876:1993, ISO 2876:1985 BS EN 22876:1993, ISO 2876:1985. Complete, filled transport packages. Method for determination of resistance to damage by rolling
BS 5646:Part 7:1986, ISO 8443-1985 BS 5646:Part 7:1986, ISO 8443-1985. Rolling bearings. Accessories. Specification for flange dimensions of radial ball bearings with flanged outer ring
BS 6694:1986 BS 6694:1986. Specification for safety of power-driven industrial brushes
BS 8303:1986 BS 8303:1986. Code of practice for installation of domestic heating and cooking appliances burning solid mineral fuels
BS 1722:Part 1:1986 BS 1722:Part 1:1986. Fences. Specification for chain link fences
BS 1722:Part 5:1986 BS 1722:Part 5:1986. Fences. Specification for close boarded fences
BS 6675:1986 BS 6675:1986. Specification for servicing valves (copper alloy) for water services
BS 1902-5.11:1986 BS 1902-5.11:1986. Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal spalling resistance by the prism test (method 1902-511)
BS 4636-3:1986, ISO 6586-1980 BS 4636-3:1986, ISO 6586-1980. Punched cards. Specification for representation of 7-bit and 8-bit coded character sets on 12-row punched cards
BS 5655-10:1986 BS 5655-10:1986. Lifts and service lifts. Specification for the testing and inspection of electric and hydraulic lifts
BS 5173:Part 103:Section 103.9:1986, ISO 6945-1983 BS 5173:Part 103:Section 103.9:1986, ISO 6945-1983. Methods of test for rubber and plastics hoses and hose assemblies. Physical tests. Determination of abrasion resistance of the outer cover
BS 5551-1.2:1986, ISO 8157-1984 BS 5551-1.2:1986, ISO 8157-1984. Fertilizers. Terminology and labelling. Glossary of terms
BS 5551-4.1.3:1986, ISO 5315-1984 BS 5551-4.1.3:1986, ISO 5315-1984. Fertilizers. Chemical analysis. Determination of nitrogen. Method for determination of total nitrogen content (titrimetric method after distillation)
BS 4193-2:1986, ISO 883-1985 BS 4193-2:1986, ISO 883-1985. Hardmetal insert tooling. Specification for dimensions for indexable hardmetal (carbide) inserts with rounded corners, without fixing hole
BS 5343:Part 1:1986 BS 5343:Part 1:1986. Gas detector tubes. Specification for short term gas detector tubes
BS 6712:Part 1:1986, ISO 8226/1-1985 BS 6712:Part 1:1986, ISO 8226/1-1985. Measurement of hygroexpansivity of paper and board. Method for measurement of hygroexpansivity up to a maximum relative humidity of 68%
BS 684-2.15:1986 BS 684-2.15:1986. Methods of analysis of fats and fatty oils. Other methods. Calculation of total saponifiable matter
BS 5604:1986, IEC 60587:1984 BS 5604:1986, IEC 60587:1984. Methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions
BS 5688-0:1986 BS 5688-0:1986. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. General introduction
BS 5688-27:1986, ISO 5935:1984 BS 5688-27:1986, ISO 5935:1984. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of total and alkali-soluble silica contents of crude sodium borates
BS 5688-29:1986, ISO 6920:1984 BS 5688-29:1986, ISO 6920:1984. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of total and alkali-soluble calcium and magnesium contents of crude sodium borates (titrimetric method)
BS 6716:1986 BS 6716:1986. Guide to properties and types of rubber
BS 3378:1986 BS 3378:1986. Specification for roomheaters burning solid mineral fuels
BS 5688-28:1986, ISO 6918:1984 BS 5688-28:1986, ISO 6918:1984. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of total and alkali-soluble calcium and magnesium contents of crude sodium borates (flame atomic absorption spectrometric method)
BS 6068-2.24:1986, ISO 7875-2:1984 BS 6068-2.24:1986, ISO 7875-2:1984. Water quality. Physical, chemical and biochemical methods. Method for the determination of non-ionic surfactants using Dragendorff reagent
BS 6404-7:1986, IEC 60404-7:1982 BS 6404-7:1986, IEC 60404-7:1982. Magnetic materials. Method of measurement of the coercivity of magnetic materials in an open magnetic circuit
BS 6663:1986 BS 6663:1986. Methods for determination of crimp rigidity of textured nylon yarns
BS 1757:1986 BS 1757:1986. Specification for power-driven mobile cranes
BS 5200:1986 BS 5200:1986. Specification for dimensions of hydraulic connectors and adaptors
BS 5550-3.4.8:1986 BS 5550-3.4.8:1986. Cinematography. 35 mm film. Sound. Specification for the lateral positions and width dimensions of two-track negative photographic sound records on 35 mm motion-picture film
BS 5929-1:1986, ISO 6658-1985 BS 5929-1:1986, ISO 6658-1985. Methods for sensory analysis of food. General guide to methodology
BS 5929-4:1986, ISO 6564-1985 BS 5929-4:1986, ISO 6564-1985. Methods for sensory analysis of food. Flavour profile methods
BS A 296:1986, ISO 7913-1985 BS A 296:1986, ISO 7913-1985. Specification for tolerances of form and position for bolts and screws. Metric series
BS 3252:1986 BS 3252:1986. Specification for ingot tin
BS 5045-5:1986 BS 5045-5:1986. Transportable gas containers. Specification for aluminium alloy containers above 0.5 litre up to 130 litres water capacity with welded seams
BS 2M 50:1986, ISO 1464-1985 BS 2M 50:1986, ISO 1464-1985. Specification for clearance dimensions for tripod jacks for aircraft
BS 2771-1:1986, EN 60204-1:1985 BS 2771-1:1986, EN 60204-1:1985. Electrical equipment of industrial machines. Specification for general requirements
BS EN 22234:1993, ISO 2234:1985 BS EN 22234:1993, ISO 2234:1985. Complete, filled transport packages. Methods of test for stacking using static load
BS EN 22248:1993, ISO 2248:1985 BS EN 22248:1993, ISO 2248:1985. Complete, filled transport packages. Method for determination of resistance to vertical impact by dropping
BS EN 22247:1993, ISO 2247:1985 BS EN 22247:1993, ISO 2247:1985. Complete, filled transport packages. Method for determination of resistance to fixed low frequency vibration
BS EN 22873:1992, ISO 2873-1985 BS EN 22873:1992, ISO 2873-1985. Complete, filled transport packages. Method for determination of resistance to low pressure
BS EN 22874:1993, ISO 2874:1985 BS EN 22874:1993, ISO 2874:1985. Complete, filled transport packages. Method of test for stacking using compression tester
BS 6711-1:1986, ISO 4791-1:1985 BS 6711-1:1986, ISO 4791-1:1985. Vocabulary relating to laboratory apparatus made essentially from glass, porcelain or vitreous silica. Names for items of apparatus
BS 808:1986 BS 808:1986. Method for assessing the efficacy of disinfectants by the modified Chick-Martin test
BS 1747:Part 8:1986, ISO 6768-1985 BS 1747:Part 8:1986, ISO 6768-1985. Methods for measurement of air pollution. Determination of the mass concentration of nitrogen dioxide in ambient air: modified Griess-Saltzman method
BS 4533-102.55:1986 BS 4533-102.55:1986. Luminaires. Particular requirements. Specification for luminaires for hospitals and health care buildings
BS 4415:Part 2:1986, ISO 1924/2-1985 BS 4415:Part 2:1986, ISO 1924/2-1985. Determination of the tensile properties of paper and board. Constant rate of elongation method
BS 6166-1:1986 BS 6166-1:1986. Lifting slings. Methods of rating
BS 6166-2:1986 BS 6166-2:1986. Lifting slings. Specification for marking
BS 1881-203:1986 BS 1881-203:1986. Testing concrete. Recommendations for measurement of velocity of ultrasonic pulses in concrete
BS 4533-103.2:1986 BS 4533-103.2:1986. Luminaires. Performance requirements. Specification for photometric characteristics of luminaires for hospitals and health care buildings
BS 5655-1:1986, EN 81-1:1985 BS 5655-1:1986, EN 81-1:1985. Lifts and service lifts. Safety rules for the construction and installation of electric lifts
BS EN 60282-1:1993, BS 2692:Part 1:1986,IEC 60282-1:1985 BS EN 60282-1:1993, BS 2692:Part 1:1986,IEC 60282-1:1985. High-voltage fuses. Current-limiting fuses
BS 2779:1986 BS 2779:1986. Specification for pipe threads for tubes and fittings where pressure-tight joints are not made on the threads (metric dimensions)
BS 4655:1986 BS 4655:1986. Method for determination of pile loss of cut-pile and non-loop pile upholstery fabrics
BS 5686:1986, ISO 14-1982 BS 5686:1986, ISO 14-1982. Specification for straight-sided splines for cylindrical shafts: metric nominal dimensions, tolerances and gauging requirements
BS 6404:Part 4:1986, IEC 60404-4:1982 BS 6404:Part 4:1986, IEC 60404-4:1982. Magnetic materials. Methods of measurement of the d.c. magnetic properties of solid steels
BS 6750:1986 BS 6750:1986. Specification for modular coordination in building
BS 5797:1986, IEC 60628:1985 BS 5797:1986, IEC 60628:1985. Methods for measurement of gassing of insulation liquids under electrical stress and ionization
BS 1380-4:1986, ISO 7589:1984 BS 1380-4:1986, ISO 7589:1984. Speed of sensitized photographic materials. Specification for daylight and incandescent tungsten illuminants for sensitometry
BS 1892:Part 2:Section 2.3:1986 BS 1892:Part 2:Section 2.3:1986. Gymnasium equipment. Particular requirements. Specification for boxes, bucks and horses
BS 1892-2.6:1986 BS 1892-2.6:1986. Gymnasium equipment. Particular requirements. Specification for boxing rings
PD 6500:1986 PD 6500:1986. Explanatory supplement to BS 5655 'Lifts and service lifts' Part 1 'Safety rules for the construction and installation of electric lifts' (EN 81:Part 1)
BS 6748:1986 BS 6748:1986. Specification for limits of metal release from ceramic ware, glassware, glass ceramic ware and vitreous enamel ware
BS 6404:Part 8:Section 8.2:1986 BS 6404:Part 8:Section 8.2:1986. Magnetic materials. Individual materials. Specification for cold-rolled, magnetic, non-oriented, alloyed steel strip delivered in the semi-processed state
BS 6404:Part 8:Section 8.3:1986 BS 6404:Part 8:Section 8.3:1986. Magnetic materials. Individual materials. Specification for cold-rolled, magnetic, non-oriented, non-alloyed steel strip delivered in the semi-processed state
BS 6043-1.8:1986, ISO 8006-1985 BS 6043-1.8:1986, ISO 8006-1985. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of ash
BS 6722:1986 BS 6722:1986. Recommendations for dimensions of metallic materials
BS C 20:1986 BS C 20:1986. Specification for aircraft gaseous oxygen replenishment connection (inch dimensions)
BS 1217:1986 BS 1217:1986. Specification for cast stone
BS 4193:Part 3:1986, ISO 3364-1985 BS 4193:Part 3:1986, ISO 3364-1985. Hardmetal insert tooling. Specification for dimensions of indexable hardmetal (carbide) inserts with rounded corners and with cylindrical fixing hole
BS 4193-15:1986, ISO 3365-1985 BS 4193-15:1986, ISO 3365-1985. Hardmetal insert tooling. Specification for dimensions for indexable hardmetal (carbide) inserts with wiper edges but without fixing hole
BS 5383:1986 BS 5383:1986. Specification for material identification of steel, nickel alloy and titanium alloy tubes by continuous character marking and colour coding of steel tubes
BS 5487:1986, ISO 5806-1984 BS 5487:1986, ISO 5806-1984. Specification for single-hit decision tables
BS 3423:1986 BS 3423:1986. Recommendations for design of glass vacuum vessels (including desiccators) for laboratory use
BS 436-3:1986 BS 436-3:1986. Spur and helical gears. Method for calculation of contact and root bending stress limitations for metallic involute gears
BS 1743-11:1986, ISO 1736-1985 BS 1743-11:1986, ISO 1736-1985. Methods for analysis of dried milk and dried milk products. Determination of fat content (gravimetric reference method)
BS 5283:1986 BS 5283:1986. Glossary of terms relating to disinfectants
BS 508-1:1986 BS 508-1:1986. Butan-1-ol for industrial use. Specification for butan-1-ol
BS 3762-3.5:1986 BS 3762-3.5:1986. Analysis of formulated detergents. Quantitative test methods. Methods for determination of total organic matter content
BS 3762-3.7:1986 BS 3762-3.7:1986. Analysis of formulated detergents. Quantitative test methods. Method for determination of total non-ionic matter content
BS 3762-3.8:1986 BS 3762-3.8:1986. Analysis of formulated detergents. Quantitative test methods. Method for determination of alkanolamides content
BS 3762-3.21:1986, ISO 8215-1985 BS 3762-3.21:1986, ISO 8215-1985. Analysis of formulated detergents. Quantitative test methods. Method for determination of total silica content
BS 3762-3.22:1986, ISO 8214-1985 BS 3762-3.22:1986, ISO 8214-1985. Analysis of formulated detergents. Quantitative test methods. Method for determination of inorganic sulphate content
BS 6200-3.12.3:1986, EN 24943:1990,ISO 4943:1985 BS 6200-3.12.3:1986, EN 24943:1990,ISO 4943:1985. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of copper. Steel and cast iron: flame atomic absorption spectrometric method
BS 6200-3.21.1:1986, EN 10178:1989,EU 178:1985 BS 6200-3.21.1:1986, EN 10178:1989,EU 178:1985. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of niobium. Steel: spectrophotometric method
BS 6200-3.22.3:1986, EN 10179:1989,EU 179:1985 BS 6200-3.22.3:1986, EN 10179:1989,EU 179:1985. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of nitrogen. Steel: spectrophotometric method (for trace amounts)
BS 4533-102.51:1986 BS 4533-102.51:1986. Luminaires. Particular requirements. Specification for luminaires with type of protection N
BS 5760-4:1986 BS 5760-4:1986. Reliability of systems, equipment and components. Guide to specification clauses relating to the achievement and development of reliability in new and existing items
BS 4833:1986 BS 4833:1986. Schedule for hygrometric tables for use in the testing and operation of environmental enclosures
BS 6757:1986 BS 6757:1986. Methods of test for thermal performance of solar collectors
BS 8004:1986 BS 8004:1986. Code of practice for foundations
BS 3680-4H:1986, ISO 8368-1985 BS 3680-4H:1986, ISO 8368-1985. Methods of measurement of liquid flow in open channels. Weirs and flumes. Guide to the selection of flow gauging structures
BS 6200-3.12.1:1986 BS 6200-3.12.1:1986. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of copper. Steel and cast iron: volumetric method
BS 6200-3.12.4:1986 BS 6200-3.12.4:1986. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of copper. Cast iron: volumetric method
BS 6200-3.12.5:1986 BS 6200-3.12.5:1986. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of copper. Permanent magnet alloys: volumetric method
BS 6200-3.16.1:1986 BS 6200-3.16.1:1986. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of lead. Carbon steels and low alloy steels: gravimetric method
BS 6200-3.16.2:1986 BS 6200-3.16.2:1986. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of lead. Steel: spectrophotometric method
BS 6200-3.29.1:1986 BS 6200-3.29.1:1986. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tantalum. Steel: spectrophotometric method
BS 6200-3.37.1:1986 BS 6200-3.37.1:1986. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of zirconium. Steel: gravimetric method
BS 3680-4I:1986, ISO 8333-1985 BS 3680-4I:1986, ISO 8333-1985. Methods of measurement of liquid flow in open channels. Weirs and flumes. V-shaped broad crested weirs
BS 6720:1986 BS 6720:1986. Specification for marking transit information on packages for distribution
BS 6785:1986 BS 6785:1986. Code of practice for solar heating systems for swimming pools
BS 2547:Part 10:1986, ISO 8489/1-1985 BS 2547:Part 10:1986, ISO 8489/1-1985. Specification for basic dimensions of cones and tubes for winding textile yarns. Cones for cross-wound winding: values of half angles, lengths and large inner diameters
BS 1722-3:1986 BS 1722-3:1986. Fences. Specification for strained wire fences
BS 1722:Part 6:1986 BS 1722:Part 6:1986. Fences. Specification for wooden palisade fences
BS 1722:Part 7:1986 BS 1722:Part 7:1986. Fences. Specification for wooden post and rail fences
BS 1722-11:1986 BS 1722-11:1986. Fences. Specification for woven wood and lap boarded panel fences
BS 3406-1:1986 BS 3406-1:1986. Methods for determination of particle size distribution. Guide to powder sampling
BS 6719:1986 BS 6719:1986. Guide to specifying user requirements for a computer-based system
BS 1595-1:1986 BS 1595-1:1986. Propan-2-ol (isopropyl alcohol) for industrial use. Specification for propan-2-ol (isopropyl alcohol)
BS 6570:1986 BS 6570:1986. Code of practice for the selection, care and maintenance of steel wire ropes
BS 6616:1986 BS 6616:1986. Specification for paper and print for optical character recognition (OCR)
BS F 131:1986 BS F 131:1986. Specification for chlorosulphonated polyethylene rubber coated nylon fabric (300 g/m2) for aerospace purposes
BS 6734:1986 BS 6734:1986. Method for determination of the antimicrobial efficacy of disinfectants for veterinary and agricultural use
BS 6778:1986 BS 6778:1986. Specification for fireguards for use with portable, free-standing or wall-mounted heating appliances
BS 903-A51:1986, ISO 6943:1984 BS 903-A51:1986, ISO 6943:1984. Methods of testing vulcanized rubber. Determination of resistance to tension fatigue
BS 5163:1986 BS 5163:1986. Specification for predominantly key-operated cast iron gate valves for waterworks purposes
BS 3900-A16:1986, ISO 7254:1984 BS 3900-A16:1986, ISO 7254:1984. Methods of test for paints. Tests on liquid paints (excluding chemical tests). Determination of natural spreading rate by brush application
BS 3900-A17:1986, ISO 7877-1984 BS 3900-A17:1986, ISO 7877-1984. Methods of test for paints. Tests on liquid paints (excluding chemical tests). Coating of test panels at a specified spreading rate
BS 3900-D8:1986, ISO 7724-1:1984 BS 3900-D8:1986, ISO 7724-1:1984. Methods of test for paints. Optical tests on paint films. Determination of colour and colour difference: principles
BS 3900-D9:1986, ISO 7724-2:1984 BS 3900-D9:1986, ISO 7724-2:1984. Methods of test for paints. Optical tests on paint films. Determination of colour and colour difference: measurement
BS 3900-D10:1986, ISO 7724-3:1984 BS 3900-D10:1986, ISO 7724-3:1984. Methods of test for paints. Determination of colour and colour difference: calculation
BS 4140-0:1986 BS 4140-0:1986. Methods of test for aluminium oxide. General introduction
BS 5766:Part 10:1986 BS 5766:Part 10:1986. Methods for analysis of animal feeding stuffs. Preparation of test samples
BS 6799:1986 BS 6799:1986. Code of practice for wire-free intruder alarm systems
BS 6800:1986 BS 6800:1986. Specification for home and personal security devices
BS 1881-125:1986 BS 1881-125:1986. Testing concrete. Methods for mixing and sampling fresh concrete in the laboratory
BS 1881-206:1986 BS 1881-206:1986. Testing concrete. Recommendations for determination of strain in concrete
BS 5415:Part 2:Section 2.2:1986 BS 5415:Part 2:Section 2.2:1986. Safety of electrical motor-operated industrial and commercial cleaning appliances. Particular requirements. Specification for vacuum cleaners, wet and/or dry
BS 5415-2.2:Supplement No. 1:1986 BS 5415-2.2:Supplement No. 1:1986. Safety of electrical motor-operated industrial and commercial cleaning appliances. Particular requirements. Specification for type H industrial vacuum cleaners for dusts hazardous to health
PP 7303:1986 PP 7303:1986. Electrical and electronic graphical symbols for schools and colleges
WD/PP7308 : 1986 Pack of 5 WD/PP7308 : 1986 Pack of 5.
PP 7316:1986 PP 7316:1986. Streamflow measurement
BS 6713-1:1986, EN 26184-1:1991,ISO 6184-1:1985 BS 6713-1:1986, EN 26184-1:1991,ISO 6184-1:1985. Explosion protection systems. Method for determination of explosion indices of combustible dusts in air
BS 6713-2:1986, EN 26184-2:1991,ISO 6184-2:1985 BS 6713-2:1986, EN 26184-2:1991,ISO 6184-2:1985. Explosion protection systems. Method for determination of explosion indices of combustible gases in air
BS 6713-3:1986, EN 26184-3:1991,ISO 6184-3:1985 BS 6713-3:1986, EN 26184-3:1991,ISO 6184-3:1985. Explosion protection systems. Method for determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures
BS 6713-4:1986, EN 26184-4:1991,ISO 6184-4:1985 BS 6713-4:1986, EN 26184-4:1991,ISO 6184-4:1985. Explosion protection systems. Method for determination of efficacy of explosion suppression systems
BS 6736:1986 BS 6736:1986. Code of practice for hand signalling for use in agricultural operations
BS 639:1986 BS 639:1986. Specification for covered carbon and carbon manganese steel electrodes for manual metal-arc welding
BS 6706:1986 BS 6706:1986. Specification for disposable glass serological pipettes
BS 1881-205:1986 BS 1881-205:1986. Testing concrete. Recommendations for radiography of concrete
BS 1902-6:1986 BS 1902-6:1986. Methods of testing refractory materials. Ceramic fibre products
BS 5534:Part 2:1986 BS 5534:Part 2:1986. Code of practice for slating and tiling. Design charts for fixing roof slating and tiling against wind uplift
BS 5760-0:1986 BS 5760-0:1986. Reliability of systems, equipment and components. Introductory guide to reliability
BS 5811:1986 BS 5811:1986. Method for determination of the resistance to pilling and change of appearance of fabrics
BS 874-2.1:1986 BS 874-2.1:1986. Methods for determining thermal insulating properties. Tests for thermal conductivity and related properties. Guarded hot-plate method
BS 5609:1986 BS 5609:1986. Specification for printed pressure-sensitive, adhesive-coated labels for marine use, including requirements for label base material
BS 848-5:1986 BS 848-5:1986. Fans for general purposes. Guide for mechanical and electrical safety
BS 1902:Part 5:Section 5.10:1986 BS 1902:Part 5:Section 5.10:1986. Methods of testing refractory materials. Refractory and thermal properties. Determination of permanent change in dimensions on heating of dense shaped products (methods 1902-510)
BS 3939-1:1986 BS 3939-1:1986. Graphical symbols for electrical power, telecommunications and electronics diagrams. General information, general index
BS 5763:Part 0:1986, ISO 7218-1985 BS 5763:Part 0:1986, ISO 7218-1985. Methods for microbiological examination of food and animal feeding stuffs. General laboratory practices
BS 6493:Part 2:Section 2.2:1986, IEC 60748-2:1985 BS 6493:Part 2:Section 2.2:1986, IEC 60748-2:1985. Semiconductor devices. Integrated circuits. Recommendations for digital integrated circuits
BS 6753:1986 BS 6753:1986. Specification for shotbolts (solenoid operated) for guarding machinery
BS CECC 51000:1986 BS CECC 51000:1986. Harmonized system of quality assessment for electronic components. Generic specification: mercury wetted change-over contact units, magnetically biased
BS 4G 178-2:1986 BS 4G 178-2:1986. Crimped joints for aircraft electrical cables and wires. Specification for control of crimping (including user control tests)
BS 1133-7.2:1986 BS 1133-7.2:1986. Packaging code. Paper and board wrappers, bags and containers. Bags and envelopes
BS 1133-7.3:1986 BS 1133-7.3:1986. Packaging code. Paper and board wrappers, bags and containers. Cartons and boxes
BS 1133-12:1986 BS 1133-12:1986. Packaging code. Methods of protection against shock (excluding cushioning devices)
BS 3761:1986 BS 3761:1986. Specification for solvent-based paint remover
BS 6730:1986 BS 6730:1986. Specification for black polyethylene pipes up to nominal size 63 for above ground use for cold potable water
BS 6737:1986, IEC 60809:1985 BS 6737:1986, IEC 60809:1985. Specification for dimensional, electrical and luminous requirements for lamps for road vehicles
BS 684-2.2:1986, ISO 6884-1985 BS 684-2.2:1986, ISO 6884-1985. Methods of analysis of fats and fatty oils. Other methods. Determination of ash
BS 684:Part 2:Section 2.39:1986, ISO 6800-1985 BS 684:Part 2:Section 2.39:1986, ISO 6800-1985. Methods of analysis of fats and fatty oils. Other methods. Determination of the composition of fatty acids in the 2-position
BS 5244:1986 BS 5244:1986. Recommendations for application, storage and life expiry of hydraulic rubber hoses and hose assemblies
BS 6754:1986, ISO 7183:1986 BS 6754:1986, ISO 7183:1986. Specifications and testing of compressed air dryers
BS 6781:1986, EU 169-1985 BS 6781:1986, EU 169-1985. Specification for continuously organic coated steel flat products
DD 155:1986 DD 155:1986. Method for determination of polished paver value of pavers
BS 6728-1:1986 BS 6728-1:1986. Thermoplastics hot water bottles. Specification for hot water bottles manufactured from PVC compounds
BS 6738:1986, ISO 6357-1985 BS 6738:1986, ISO 6357-1985. Recommendations for presentation of spine titles
BS MA 101:1986 BS MA 101:1986. Specification for toilet retention and recirculation systems for the treatment of toilet waste on small craft
BS 3920-2:1986, ISO 2605-3:1985 BS 3920-2:1986, ISO 2605-3:1985. Derivation and verification of elevated temperature properties for steel products for pressure purposes. Method for deriving the elevated temperature yield or proof stress properties when data are limited
BS 3958-5:1986 BS 3958-5:1986. Thermal insulating materials. Specification for bonded man-made mineral fibre slabs
BS 6290-3:1986 BS 6290-3:1986. Lead-acid stationary cells and batteries. Specification for lead-acid pasted positive plate type
BS MA 102:1986, ISO 7840:1985 BS MA 102:1986, ISO 7840:1985. Specification for fire resistant fuel hoses for small craft
BS 684-2.26:1986 BS 684-2.26:1986. Methods of analysis of fats and fatty oils. Other methods. Determination of polyethylene-type plastics
BS 2782:Part 1:Method 141:1986, ISO 4589-1984 BS 2782:Part 1:Method 141:1986, ISO 4589-1984. Methods of testing plastics. Thermal properties. Determination of flammability by oxygen index
BS 2910:1986 BS 2910:1986. Methods for radiographic examination of fusion welded circumferential butt joints in steel pipes
BS 3221:Part 7:1986 BS 3221:Part 7:1986. Medicine measures. Specification for oral syringes delivering doses of less than 5 mL
BS 3225:Part 1:1986, ISO 8116-2:1985 BS 3225:Part 1:1986, ISO 8116-2:1985. Beams for warping, sizing and weaving of textile yarns. Specification for main dimensions of, and terminology for, warper's beams
BS 3225:Part 4:1986, ISO 8116/1-1985 BS 3225:Part 4:1986, ISO 8116/1-1985. Beams for warping, sizing and weaving of textile yarns. Glossary of terms for winding beams
BS 3762-3.6:1986 BS 3762-3.6:1986. Analysis of formulated detergents. Quantitative test methods. Method for determination of matter soluble in light petroleum
BS 3762-3.9:1986 BS 3762-3.9:1986. Analysis of formulated detergents. Quantitative test methods. Method for determination of soap content
BS 5308-1:1986 BS 5308-1:1986. Instrumentation cables. Specification for polyethylene insulated cables
BS 5308-2:1986 BS 5308-2:1986. Instrumentation cables. Specification for PVC insulated cables
BS 6083-9:1986, IEC 60118-9:1985 BS 6083-9:1986, IEC 60118-9:1985. Hearing aids. Methods for measurement of characteristics of hearing aids with bone vibrator output
BS 6749:Part 1:1986, ISO 7919/1-1986 BS 6749:Part 1:1986, ISO 7919/1-1986. Measurements and evaluation of vibration on rotating shafts. Guide to general principles
BS 6751:1986 BS 6751:1986. Guide for protection of machine tools intended for use in extreme environmental conditions
BS 6794:1986, ISO 8002-1986 BS 6794:1986, ISO 8002-1986. Method for reporting measured vibration data for land vehicles
BS 6804:1986 BS 6804:1986. Code of practice for social alarm systems
BS 3225:Part 5:1986, ISO 8116/4-1985 BS 3225:Part 5:1986, ISO 8116/4-1985. Beams for warping, sizing and weaving of textile yarns. Method of classification of flanges for weavers's beams, warper's beams and sectional beams
BS 5766-11:1986, ISO 6490-1:1985 BS 5766-11:1986, ISO 6490-1:1985. Methods for analysis of animal feeding stuffs. Determination of calcium by titration
BS 5766-12:1986, ISO 6866-1985 BS 5766-12:1986, ISO 6866-1985. Methods for analysis of animal feeding stuffs. Determination of gossypol
BS 2782:Part 8:Method 830A:1986, ISO 175-1981 BS 2782:Part 8:Method 830A:1986, ISO 175-1981. Methods of testing plastics. Other properties. Determination of the effects of liquid chemicals, including water
BS 5499-2:1986 BS 5499-2:1986. Fire safety signs, notices and graphic symbols. Specification for self-luminous fire safety signs
BS 5793-6:1986, IEC 60534-6:1985 BS 5793-6:1986, IEC 60534-6:1985. Industrial-process control valves. Specificaton for mounting details for attachment of positioners to control valve actuators
BS 5793-8.1:1986, IEC 60534-8-1:1986 BS 5793-8.1:1986, IEC 60534-8-1:1986. Industrial-process control valves. Noise considerations. Method for laboratory measurement of noise generated by aerodynamic flow through control valves
BS MA 103:1986 BS MA 103:1986. Specification for design conditions and basis of calculations for air-conditioning and ventilation of accommodation spaces in ships
BS 6438-3:1986, IEC 60746-3:1985 BS 6438-3:1986, IEC 60746-3:1985. Electrochemical analyzers. Method for specifying performance of electrolytic conductivity analyzers
BS 6752:1986 BS 6752:1986. Specification for Bourdon tube pressure gauges used in welding, cutting and related processes
BS 3169:1986 BS 3169:1986. Specification for first aid reel hoses for fire-fighting purposes
BS 5550-5.4.4:1986, ISO 8590-1985 BS 5550-5.4.4:1986, ISO 8590-1985. Cinematography. Common to more than one gauge. Sound. Specification for the recorded characteristic for audio records on 35 mm and 70 mm motion-picture release prints with magnetic stripes
BS 5685-2:1986 BS 5685-2:1986. Electricity meters. Specification for single-phase coin operated prepayment flat rate and two-part tariff watt-hour meters of Class 2 and fixed charge collectors of Class 2
BS 5685-3:1986 BS 5685-3:1986. Electricity meters. Specification for meters having Class 1 electro-mechanical maximum demand indicators
BS 5685-4:1986 BS 5685-4:1986. Electricity meters. Specification for Class 3 var-hour meters
BS 5696:Part 1:1986 BS 5696:Part 1:1986. Play equipment intended for permanent installation outdoors. Methods of test
BS 6404:Part 5:1986, IEC 60404-5:1982 BS 6404:Part 5:1986, IEC 60404-5:1982. Magnetic materials. Methods of measurement of the magnetic properties of magnetically hard (permanent magnet) materials
BS 6721-4:1986, ISO 4744-1984 BS 6721-4:1986, ISO 4744-1984. Sampling and analysis of copper and copper alloys. Method for determination of chromium in copper and copper alloys by flame atomic absorption spectrophotometry
BS 6721-5:1986, ISO 4740-1985 BS 6721-5:1986, ISO 4740-1985. Sampling and analysis of copper and copper alloys. Method for determination of zinc in copper and copper alloys by flame atomic absorption spectrophotometry
BS 6756:1986 BS 6756:1986. Specification for fibre rope cargo nets
BS 6783-1:1986, ISO 6351-1985 BS 6783-1:1986, ISO 6351-1985. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of silver, bismuth, cadmium, cobalt, copper, iron, manganese, lead and zinc in nickel by flame atomic absorption spectrometry
BS 6783-2:1986, EN 26352:1991,ISO 6352-1985 BS 6783-2:1986, EN 26352:1991,ISO 6352-1985. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of nickel in ferronickel (dimethylglyoxime gravimetric method)
BS 6783-3:1986, EN 27520:1991,ISO 7520-1985 BS 6783-3:1986, EN 27520:1991,ISO 7520-1985. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of cobalt in ferronickel by flame atomic absorption spectrometry
BS 6783-4:1986, ISO 7523-1985 BS 6783-4:1986, ISO 7523-1985. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium in nickel by electrothermal atomic absorption spectrometry
BS 6783-5:1986, ISO 7524-1985 BS 6783-5:1986, ISO 7524-1985. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of carbon in nickel, ferronickel and nickel alloys by infra-red absorption after induction furnace combustion
BS 6783-6:1986, ISO 7525-1985 BS 6783-6:1986, ISO 7525-1985. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of sulphur in nickel by methylene blue molecular absorption spectrometry after generation of hydrogen sulphide
BS 6783-7:1986, EN 27526:1991,ISO 7526-1985 BS 6783-7:1986, EN 27526:1991,ISO 7526-1985. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of sulphur in nickel, ferronickel and nickel alloys by infra-red absorption after induction furnace combustion
BS 6783-8:1986, EN 27527:1991,ISO 7527-1985 BS 6783-8:1986, EN 27527:1991,ISO 7527-1985. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of sulphur in nickel, ferronickel and nickel alloys by iodimetric titration after induction furnace combustion
BS 6783-9:1986, EN 28343:1991,ISO 8343-1985 BS 6783-9:1986, EN 28343:1991,ISO 8343-1985. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of silicon in ferronickel (gravimetric method)
BS 903:Part A19:1986, ISO 188-1982 BS 903:Part A19:1986, ISO 188-1982. Physical testing of rubber. Heat resistance and accelerated ageing tests
BS 4227:1986, EN 21560:1991,ISO 1560-1985 BS 4227:1986, EN 21560:1991,ISO 1560-1985. Specification for dental mercury
BS 6797:1986, IEC 60810:1986 BS 6797:1986, IEC 60810:1986. Specification for performance requirements for lamps for road vehicles
BS 903-A52:1986, ISO 6914:1985 BS 903-A52:1986, ISO 6914:1985. Physical testing of rubber. Determination of ageing characteristics by measurement of stress at a given elongation
BS 2874:1986 BS 2874:1986. Specification for copper and copper alloy rods and sections (other than forging stock)
BS 4193-16:1986, ISO 7848-1986 BS 4193-16:1986, ISO 7848-1986. Hardmetal insert tooling. Specification for designation of shank type milling cutters for indexable inserts
BS 4931:1986 BS 4931:1986. Methods for preparation, marking and measuring of textile fabrics, garments and fabric assemblies in tests for assessing dimensional change
BS 5799:1986 BS 5799:1986. Specification for safety requirements for children's high chairs and multi-purpose high chairs for domestic use
BS 6739:1986 BS 6739:1986. Code of practice for instrumentation in process control systems: installation design and practice
BS 6786:1986, IEC 60424:1973 BS 6786:1986, IEC 60424:1973. Guide to the specification of limits for physical imperfections of parts made from magnetic oxides
BS 6801:1986, IEC 60858:1986 BS 6801:1986, IEC 60858:1986. Method for determination of image distortion of electro-optical X-ray image intensifiers
BS EN 120003:1993 BS EN 120003:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Phototransistors, photodarlington transistors, phototransistor arrays
BS EN 120005:1993 BS EN 120005:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Photodiodes, photodiode-arrays (not intended for fibre optic applications)
BS ISO 3534-3:1985 BS ISO 3534-3:1985. Statistics. Vocabulary and symbols. Glossary of terms relating to the design of experiments
BS 6784:1986 BS 6784:1986. Specification for rubber hoses and hose assemblies for automobile power steering systems
BS 3087-3:1986, ISO 5743-1982 BS 3087-3:1986, ISO 5743-1982. Pliers and nippers. Specification for general requirements
BS 3762-4.2:1986, ISO 697-1981 BS 3762-4.2:1986, ISO 697-1981. Analysis of formulated detergents. Physical test methods. Method for determination of apparent bulk density
BS 3087-2:1986, ISO 5742-1982 BS 3087-2:1986, ISO 5742-1982. Pliers and nippers. Nomenclature
BS 3087-5:1986, ISO 5745-1982 BS 3087-5:1986, ISO 5745-1982. Pliers and nippers. Specification for dimensions of pliers for gripping and manipulating
BS 3087-6:1986, ISO 5746-1982 BS 3087-6:1986, ISO 5746-1982. Pliers and nippers. Specification for dimensions of engineers and lineman's pliers
BS 3087:Part 7:1986, ISO 5747-1982 BS 3087:Part 7:1986, ISO 5747-1982. Pliers and nippers. Specification for dimensions of lever assisted side cutting pliers, end and diagonal cutting nippers
BS 3087-8:1986, ISO 5748-1982 BS 3087-8:1986, ISO 5748-1982. Pliers and nippers. Specification for dimensions of end cutting nippers
BS 3087-9:1986, ISO 5749-1982 BS 3087-9:1986, ISO 5749-1982. Pliers and nippers. Specification for dimensions of diagonal cutting nippers
BS 3165:1986 BS 3165:1986. Specification for rubber and plastics suction hoses and hose assemblies for fire-fighting purposes
BS 3505:1986 BS 3505:1986. Specification for unplasticized polyvinyl chloride (PVC-U) pressure pipes for cold potable water
BS 3923:Part 1:1986 BS 3923:Part 1:1986. Methods for ultrasonic examination of welds. Methods for manual examination of fusion welds in ferritic steels
BS 5080-2:1986 BS 5080-2:1986. Structural fixings in concrete and masonry. Method for determination of resistance to loading in shear
BS 1133-19:1986 BS 1133-19:1986. Packaging code. Use of desiccants in packaging
BS 1000[669]:1986 BS 1000[669]:1986. Universal Decimal Classification. English full edition. Metallurgy
BS 3101:1986 BS 3101:1986. Specification for control and interlock circuits primarily associated with flameproof restrained plugs and sockets for use in coal mines
BS 4960:1986 BS 4960:1986. Specification for weighing instruments for domestic cookery
BS 5122:1986 BS 5122:1986. Specification for rubber hoses for low-pressure and medium-pressure saturated steam
BS 6404:Part 8:Section 8.4:1986 BS 6404:Part 8:Section 8.4:1986. Magnetic materials. Individual materials. Specification for cold-rolled, non-oriented magnetic steel sheet and strip delivered in the finally annealed state
BS 6744:1986 BS 6744:1986. Specification for austenitic stainless steel bars for the reinforcement of concrete
BS 6789-6.1:1986 BS 6789-6.1:1986. Apparatus with one or more particular functions for connection to certain public switched telephone networks. Specification for series connected apparatus. Apparatus having maximum allowable impairments
BS 5550-2.4.3:1986, ISO 1188-1984 BS 5550-2.4.3:1986, ISO 1188-1984. Cinematography. 16 mm film. Sound. Specification for the recorded characteristic for magnetic round records on 16 mm motion-picture film
BS 5550-3.2.1:1986, ISO 2906:1984 BS 5550-3.2.1:1986, ISO 2906:1984. Cinematography. 35 mm film. Image areas. Specification for the position and dimensions of the image area produced by camera aperture on 35 mm motion-picture film
BS 5550-3.2.2:1986, ISO 2907:1984 BS 5550-3.2.2:1986, ISO 2907:1984. Cinematography. 35 mm film. Image areas. Specification for the position and dimensions of the maximum projectable image area on 35 mm motion-picture film
BS 6248-10:1986, ISO 5543-1986 BS 6248-10:1986, ISO 5543-1986. Caseins and caseinates. Method for determination of fat (gravimetric reference method)
BS 4724:Part 1:1986 BS 4724:Part 1:1986. Resistance of clothing materials to permeation by liquids. Method for the assessment of breakthrough time
BS 5550-5.4.1:1986 BS 5550-5.4.1:1986. Cinematography. Common to more than one gauge. Sound. Code of Practice for the identification of systems for synchronization of unperforated audio tape with motion-picture film and videotape
BS 6068:Part 2:Section 2.28:1986, ISO 6878/1-1986 BS 6068:Part 2:Section 2.28:1986, ISO 6878/1-1986. Water quality. Physical, chemical and biochemical methods. Method for the determination of phosphorus: ammonium molybdate spectrometric method
BS 6788:Part 1:1986 BS 6788:Part 1:1986. Neurosurgical implants. Specification for sterile, single-use hydrocephalus shunts and components
BS EN 190100:1993 BS EN 190100:1993. Harmonized system of quality assessment for electronic components: sectional specification: digital monolithic integrated circuits
BS8100-1 : 1986 BS8100-1 : 1986 .
BS 8100-2:1986 BS 8100-2:1986. Lattice towers and masts. Guide to the background and use of Part 1 'Code of practice for loading'
DD 133:1986 DD 133:1986. Code of practice for strength assessment of members of lattice towers and masts
BS 240:1986 BS 240:1986. Method for Brinell hardness test and for verification of Brinell hardness testing machines
BS 874-1:1986 BS 874-1:1986. Methods for determining thermal insulating properties. Introduction, definitions and principles of measurement
BS 5550-2.7.1:1986, ISO 26-1985 BS 5550-2.7.1:1986, ISO 26-1985. Cinematography. 16 mm film. Projection. Specification for projector usage of 16 mm motion-picture films for direct front projection
BS 4873:1986 BS 4873:1986. Specification for aluminium alloy windows
BS 6755-1:1986 BS 6755-1:1986. Testing of valves. Specification for production pressure testing requirements
BS EN ISO 4536:1995 BS EN ISO 4536:1995. Metallic and non-organic coatings on metallic substrates. Saline droplets corrosion test (SD test)
BS 6805-1:1987, EN 27574-1:1988,ISO 7574-1:1985 BS 6805-1:1987, EN 27574-1:1988,ISO 7574-1:1985. Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Glossary of terms
BS 6805-2:1987, EN 27574-2:1988,ISO 7574-2:1985 BS 6805-2:1987, EN 27574-2:1988,ISO 7574-2:1985. Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Method for determining and verifying stated values for individual machines
BS 6805-3:1987, EN 27574-3:1988,ISO 7574-3:1985 BS 6805-3:1987, EN 27574-3:1988,ISO 7574-3:1985. Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Method for determining and verifying stated values for batches of machines using a simple (transition) method
BS 6805-4:1987, EN 27574-4:1988,ISO 7574-4:1985 BS 6805-4:1987, EN 27574-4:1988,ISO 7574-4:1985. Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Methods for determining and verifying stated values for batches of machines
BS 1344:Part 9:1987, ISO 2744-1983 BS 1344:Part 9:1987, ISO 2744-1983. Methods of testing vitreous enamel finishes. Determination of resistance to boiling water and water vapour
BS 6792:1986 BS 6792:1986. Specification for agricultural trailer and trailed machinery drawbar jacks
BS 2M 45:Part 2:1986 BS 2M 45:Part 2:1986. Aircraft tyres and rims. Methods of test for tyres
BS 1722-4:1986 BS 1722-4:1986. Fences. Specification for cleft chestnut pale fences
BS 3473-2:1987, ISO 719-1985 BS 3473-2:1987, ISO 719-1985. Chemical resistance of glass used in the production of laboratory glassware. Method for determination of hydrolytic resistance of glass grains at 98°C
BS 3473-5:1987, ISO 1776-1985 BS 3473-5:1987, ISO 1776-1985. Chemical resistance of glass used in the production of laboratory glassware. Method for determination of resistance of glass to attack by 6 mol/L hydrochloric acid at 100°C
BS 6790:1987, EN 27491:1991,ISO 7491-1985 BS 6790:1987, EN 27491:1991,ISO 7491-1985. Method for determination of colour stability of dental polymeric materials
BS 770-8:1987 BS 770-8:1987. Methods for chemical analysis of cheese. Determination of nitrogen content (reference method)
BS 873-4:1987 BS 873-4:1987. Road traffic signs and internally illuminated bollards. Specification for road studs
BS 1743-8:1987, ISO 8069:1986 BS 1743-8:1987, ISO 8069:1986. Methods for analysis of dried milk and dried milk products. Determination of lactic acid and lactates content of dried milk
BS 2772-3:1987 BS 2772-3:1987. Colliery haulage and winding equipment. Specification for 1.5% manganese steel castings
BS 3332:1987 BS 3332:1987. Specification for white metal bearing alloy ingots
BS 3396-2:1987 BS 3396-2:1987. Woven glass fibre fabrics for plastics reinforcement. Specification for desized fabrics
BS 3424-10:1987 BS 3424-10:1987. Testing coated fabrics. Methods 12A and 12B Determination of surface drag
BS 3473-3:1987, ISO 720-1985 BS 3473-3:1987, ISO 720-1985. Chemical resistance of glass used in the production of laboratory glassware. Method for determination of hydrolytic resistance of glass grains at 121°C
BS 6725:1986, IEC 60814:1985 BS 6725:1986, IEC 60814:1985. Method for determination of water in liquid dielectrics by automatic coulometric Karl Fischer titration
BS 6787:1987, ISO 8249-1985 BS 6787:1987, ISO 8249-1985. Method for determination of ferrite number in austenitic weld metal deposited by covered Cr-Ni steel electrodes
BS 6811:Part 2:Section 2.1:1987, IEC 60851-1:1985 BS 6811:Part 2:Section 2.1:1987, IEC 60851-1:1985. Winding wires. Methods of test. General test conditions and schedule of tests
BS 6811:Part 2:Section 2.2:1987, IEC 60851-2:1985 BS 6811:Part 2:Section 2.2:1987, IEC 60851-2:1985. Winding wires. Methods of test. Determination of dimensions
BS EN 60851-4:1995 BS EN 60851-4:1995. Methods of test for winding wires. Chemical properties
BS 6811:Part 2:Section 2.6:1987, IEC 60851-6:1985 BS 6811:Part 2:Section 2.6:1987, IEC 60851-6:1985. Winding wires. Methods of test. Thermal properties
BS AU 210-1:1987 BS AU 210-1:1987. Drawbars for caravans and light trailers. Method of calculation for the mechanical strength of steel drawbars
BS 5258-13:1986 BS 5258-13:1986. Safety of domestic gas appliances. Specification for convector heaters
BS 6813:1987 BS 6813:1987. Specification for trade cutlery for use with food
BS AU 207:1986 BS AU 207:1986. Specification for dimensions of car radio installation space
BS 3396-3:1987 BS 3396-3:1987. Woven glass fibre fabrics for plastics reinforcement. Specification for finished fabrics for use with polyester resin systems
BS 6579-5:1986 BS 6579-5:1986. Safety fences and barriers for highways. Specification for open box beam safety fence (single height)
BS AU 213:1987, ISO 8703:1986 BS AU 213:1987, ISO 8703:1986. Specification for calculation of forces on control devices for inertia braking of caravans and light trailers
BS 5465:1987 BS 5465:1987. Specification for electrodes and fluxes for the submerged arc welding of austenitic stainless steels
BS 6806-1:1987 BS 6806-1:1987. Formaldehyde in textiles. Method for determination of total formaldehyde
BS 6806-2:1987 BS 6806-2:1987. Formaldehyde in textiles. Method for determination of 'free' formaldehyde
BS 6806-3:1987 BS 6806-3:1987. Formaldehyde in textiles. Method for determination of released formaldehyde
BS 6818-2:1987, ISO 8759-2:1985 BS 6818-2:1987, ISO 8759-2:1985. Front-mounted linkage and power take-off for agricultural wheeled tractors. Specification for front linkage
BS F 130:1987 BS F 130:1987. Specification for rubber bonded compressed aramid fibre jointing material for aerospace purposes
BS 5258-1:1986 BS 5258-1:1986. Safety of domestic gas appliances. Specification for central heating boilers and circulators
BS 6818-1:1987, ISO 8759-1:1985 BS 6818-1:1987, ISO 8759-1:1985. Front-mounted linkage and power take-off for agricultural wheeled tractors. Specification for power take-off
BS AU 211:1987, ISO 8719-1986 BS AU 211:1987, ISO 8719-1986. Specification for dimensions of four-hole flanges for gear-driven air compressors for commercial vehicles and buses
BS AU 215-1:1987, ISO 7706-1985 BS AU 215-1:1987, ISO 7706-1985. Power take offs (PTOs). Specification for dimensions for clearance envelope for commercial road vehicles
BS AU 215-2:1987, ISO 7804-1985 BS AU 215-2:1987, ISO 7804-1985. Power take offs (PTOs). Specification for dimensions of side openings for commercial road vehicles
BS 1902-7.0:1987 BS 1902-7.0:1987. Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Introduction and definitions
BS 1902-7.1:1987 BS 1902-7.1:1987. Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Guidance on sampling (of unshaped refractories)
BS 1902-7.2:1987 BS 1902-7.2:1987. Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Testing of material as supplied and received (method 1902-702)
BS 1902-7.3:1987 BS 1902-7.3:1987. Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Preparation of test pieces from dense castables by vibration (method 1902-703)
BS 1902-7.4:1987 BS 1902-7.4:1987. Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Preparation of test pieces from insulating castables (method 1902-704)
BS 1902-7.5:1987 BS 1902-7.5:1987. Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Preparation of test pieces from mouldables and ramming mixes (method 1902-705)
BS EN 60873:1993 BS EN 60873:1993. Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems
BS 5514:Part 1:1987, ISO 3046/1-1986 BS 5514:Part 1:1987, ISO 3046/1-1986. Reciprocating internal combustion engines: performance. Specification for standard reference conditions and declarations of power, fuel consumption and lubricating oil consumption
BS 6290:Part 4:1987 BS 6290:Part 4:1987. Lead-acid stationary cells and batteries. Specification for lead-acid valve regulated sealed type
BS 5240:Part 1:1987 BS 5240:Part 1:1987. Industrial safety helmets. Specification for construction and performance
BS 6729:1987 BS 6729:1987. Method for determination of the dynamic fracture toughness of metallic materials
BS AU 214a-1:1987, ISO 8667:1986 BS AU 214a-1:1987, ISO 8667:1986. Gearbox flanges. Specification for dimensions of cross-tooth gearbox flanges, type T, for commercial vehicles and buses
BS 6732:1987, EN 50043:1985 BS 6732:1987, EN 50043:1985. Specification for low-voltage switchgear and controlgear for industrial use. Size numbers and gauges for flat connections
BS 4575:Part 2:1987 BS 4575:Part 2:1987. Fluid power transmission and control systems. Code of practice for pneumatic equipment and systems
BS 684:Part 1:Section 1.14:1987 BS 684:Part 1:Section 1.14:1987. Methods of analysis of fats and fatty oils. Physical methods. Determination of colour
BS 3424-17:1987 BS 3424-17:1987. Testing coated fabrics. Method 20. Method for determination of dimensional stability to water immersion
BS 3424-20:1987 BS 3424-20:1987. Testing coated fabrics. Method 23. Method for determination of dimensional changes on mechanical relaxation at zero tension
BS 4317:Part 17:1987, ISO 7305-1986 BS 4317:Part 17:1987, ISO 7305-1986. Methods of test for cereals and pulses. Determination of fat acidity
BS 4999-108:1987 BS 4999-108:1987. General requirements for rotating electrical machines. Specification for terminal markings and direction of rotation
BS 4999:Part 112:1987 BS 4999:Part 112:1987. General requirements for rotating electrical machines. Specification for starting performance of single-speed three-phase cage induction motors
BS 4999-140:1987 BS 4999-140:1987. General requirements for rotating electrical machines. Specification for voltage regulation and parallel operation of a.c. synchronous generators
BS 4999-143:1987 BS 4999-143:1987. General requirements for rotating electrical machines. Specification for tests
BS 506-1:1987 BS 506-1:1987. Methanol for industrial use. Specification for methanol
BS 509-1:1987 BS 509-1:1987. Acetone for industrial use. Specification for acetone
BS 3900:Part J4:1987 BS 3900:Part J4:1987. Methods of test for paints. Testing of coating powders. Determination of the storage stability of coating powders
BS 4317-2:1987, ISO 711-1985 BS 4317-2:1987, ISO 711-1985. Methods of test for cereals and pulses. Determination of moisture content of cereals and cereal products (reference method)
BS 4317:Part 3:1987, ISO 712-1986 BS 4317:Part 3:1987, ISO 712-1986. Methods of test for cereals and pulses. Determination of moisture content of cereals and cereal products (routine method)
BS 3221-6:1987 BS 3221-6:1987. Medicine measures. Specification for free-standing plastics medicine measuring spoons of 5 mL capacity
BS 5485:Part 2:1987, ISO 4510/2-1986 BS 5485:Part 2:1987, ISO 4510/2-1986. Service tools used with earth-moving machinery. Guide to common repair tools: mechanical pullers and pushers
BS 6149:Part 1:1987, ISO 5366-1:1986 BS 6149:Part 1:1987, ISO 5366-1:1986. Tracheostomy tubes. Specification for connectors
BS 6153:1987, ISO 5364-1986 BS 6153:1987, ISO 5364-1986. Specification for oropharyngeal airways
BS 6747:1987 BS 6747:1987. Specification for orthodontic resins
BS 6822:1987, ISO 8532-1986 BS 6822:1987, ISO 8532-1986. Specification for format for transmission of certificate numbers of securities
BS 6823:1987, ISO 7133-1985 BS 6823:1987, ISO 7133-1985. Glossary of terminology and content of commercial specifications for tractor-scrapers used for earth-moving, and their equipment
BS 1470:1987 BS 1470:1987. Specification for wrought aluminium and aluminium alloys for general engineering purposes: plate, sheet and strip
BS 4999:Part 101:1987 BS 4999:Part 101:1987. General requirements for rotating electrical machines. Specification for rating and performance
BS 6212:1987, ISO 3271-1985 BS 6212:1987, ISO 3271-1985. Method for determination of tumbler strength of iron ores
BS 6824:1987, ISO 3450-1985 BS 6824:1987, ISO 3450-1985. Specification for performance and test of braking systems for wheeled earth-moving machinery
BS 67:1987 BS 67:1987. Specification for ceiling roses
BS 3730-1:1987, ISO 6318:1985 BS 3730-1:1987, ISO 6318:1985. Assessment of departures from roundness. Glossary of roundness measurement terms
BS 6393:1987, ISO 5436-1985 BS 6393:1987, ISO 5436-1985. Specification for calibration of stylus instruments
BS 6740:1986, ISO 4291-1985 BS 6740:1986, ISO 4291-1985. Method for determining departures from roundness by measuring variations in radius
BS 6741:Part 1:1987, ISO 4287-1:1984 BS 6741:Part 1:1987, ISO 4287-1:1984. Glossary of surface roughness terms. Surface and its parameters
BS 6741:Part 2:1987, ISO 4287-2:1984 BS 6741:Part 2:1987, ISO 4287-2:1984. Glossary of surface roughness terms. Measurement of surface roughness parameters
BS 6811-1.1:1987 BS 6811-1.1:1987. Winding wires. Basic dimensions. Specification for diameters of conductors for round winding wires
BS 6831:1987, ISO 7846-1985 BS 6831:1987, ISO 7846-1985. Specification for industrial real-time FORTRAN
BS 1493:1987 BS 1493:1987. Method of specifying general purpose polystyrene (PS) moulding and extrusion materials
BS 2634-1:1987, ISO 2632-1:1985 BS 2634-1:1987, ISO 2632-1:1985. Roughness comparison specimens. Specification for turned, ground, bored, milled, shaped and planed specimens
BS 2634-2:1987, ISO 2632-2:1985 BS 2634-2:1987, ISO 2632-2:1985. Roughness comparison specimens. Specification for spark-eroded, shot-blasted, grit-blasted, and polished specimens
BS 3126:1987 BS 3126:1987. Method of specifying toughened polystyrene (SB) moulding and extrusion materials
BS 3900-B15:1987 BS 3900-B15:1987. Methods of test for paints. Rapid method for estimation of lead in liquid paints
BS EN ISO 3882:1995 BS EN ISO 3882:1995. Metallic and other non-organic coatings. Review of methods of measurement of thickness
BS 5527:Part 1:1987, ISO 3471/1-1986 BS 5527:Part 1:1987, ISO 3471/1-1986. Roll-over protective structures on earth-moving machinery: laboratory tests and performance requirements. Specification for crawler, wheel loaders and tractors, backhoe loaders, graders, tractor scrapers, articulated steer dumpers
BS 535:1987 BS 535:1987. Specification for light sources for miners' portable electric lamps
BS 1746:1987 BS 1746:1987. Specification for domestic pressure cookers
BS 4471:1987 BS 4471:1987. Specification for sizes of sawn and processed softwood
BS 6743:1987 BS 6743:1987. Specification for performance of handles and handle assemblies attached to cookware
BS 8201:1987 BS 8201:1987. Code of practice for flooring of timber, timber products and wood based panel products
DD 140-2:1987 DD 140-2:1987. Wall ties. Recommendations for design of wall ties
BS 5759:1987 BS 5759:1987. Specification for webbing load restraint assemblies for use in surface transport
BS 3492:1987 BS 3492:1987. Specification for road and rail tanker hoses and hose assemblies for petroleum products, including aviation fuels
BS 874-3.1:1987 BS 874-3.1:1987. Methods for determining thermal insulating properties. Tests for thermal transmittance and conductance. Guarded hot-box method
BS 1123-1:1987 BS 1123-1:1987. Safety valves, gauges and fusible plugs for compressed air or inert gas installations. Code of practice for installation
BS 2000:Part 0:Addendum No. 1:1987 BS 2000:Part 0:Addendum No. 1:1987. Methods of test for petroleum and its products. Standard reagents and thermometers
BS EN ISO 3457:1995 BS EN ISO 3457:1995. Earth-moving machinery. Guards and shields. Definitions and specifications
BS 6068-2.29:1987, ISO 8288-1986 BS 6068-2.29:1987, ISO 8288-1986. Water quality. Physical, chemical and biochemical methods. Determination of cobalt, nickel, copper, zinc, cadmium and lead: flame atomic absorption spectrometric methods
BS 6816:1987, EN 23950:1989,ISO 3950:1984 BS 6816:1987, EN 23950:1989,ISO 3950:1984. Designation system for teeth and areas of the oral cavity
BS 5942-8:1987, IEC 60581-8:1986 BS 5942-8:1987, IEC 60581-8:1986. High fidelity audio equipment and systems; minimum performance requirements. Specification for combination equipment
BS M 62:1987, ISO 7661-1984 BS M 62:1987, ISO 7661-1984. Specification for design and qualification testing of clamp blocks for fluid system tube lines having axial alignment. Metric series
BS 5042:1987 BS 5042:1987. Specification for bayonet lampholders
BS 6809:1987 BS 6809:1987. Method for calibration of radiometers for use in fire testing
BS 6827:1987, ISO 8455-1986 BS 6827:1987, ISO 8455-1986. Guide to storage and transport of green coffee in bags
BS 8010-2.1:1987 BS 8010-2.1:1987. Code of practice for pipelines. Pipelines on land: design, construction and installation. Ductile iron
BS 2544:1987 BS 2544:1987. Methods for determination of thickness of textile materials
BS 6114:1987, ISO 6484-1986 BS 6114:1987, ISO 6484-1986. Method for measurement of volumetric ratings of elevating scrapers used for earth-moving
BS 6812:Part 1:1987, ISO 6393-1985 BS 6812:Part 1:1987, ISO 6393-1985. Airborne noise emitted by earth-moving machinery. Method of measurement of exterior noise in a stationary test condition
BS 6812:Part 2:1987, ISO 6394-1985 BS 6812:Part 2:1987, ISO 6394-1985. Airborne noise emitted by earth-moving machinery. Method of measurement at the operator's position in a stationary test condition
BS EN 20140-9:1994, BS 2750-9:1987,ISO 140-9:1985 BS EN 20140-9:1994, BS 2750-9:1987,ISO 140-9:1985. Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it
BS 3156-11.1.2:1987, ISO 6975-1986 BS 3156-11.1.2:1987, ISO 6975-1986. Analysis of fuel gases. Methods for non-manufactured gases. Hydrocarbons and inert gases. Determination of hydrocarbons from butane (C4) to hexadecane (C16) by gas chromatography
BS 6288-6:1987, IEC 60094-6:1985 BS 6288-6:1987, IEC 60094-6:1985. Magnetic tape sound recording and reproducing systems. Specification for reel-to-reel systems
BS 6829-1.1:1987, ISO 6844-1983 BS 6829-1.1:1987, ISO 6844-1983. Analysis of surface active agents (raw materials). General methods. Method for determination of mineral sulphate content
BS 3G 101:1987 BS 3G 101:1987. Specification for general requirements for mechanical and electromechanical aircraft indicators
BS 3735:1987 BS 3735:1987. Specification for plastics and rubber dustbin lids
BS 5350:Part G1:1987 BS 5350:Part G1:1987. Methods of test for adhesives. Tests on anaerobic adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners
BS 5350-G2:1987 BS 5350-G2:1987. Methods of test for adhesives. Tests on anaerobic adhesives. Determination of static shear strength of anaerobic adhesives
BS 5350-G3:1987 BS 5350-G3:1987. Methods of test for adhesives. Determination of ability of anaerobic adhesives to set on metal surfaces
BS 6808-1:1987 BS 6808-1:1987. Coordinate measuring machines. Glossary of terms
BS 4999-102:1987, IEC 60034-2:1972,IEC 60034-2A:1974 BS 4999-102:1987, IEC 60034-2:1972,IEC 60034-2A:1974. General requirements for rotating electrical machines. Methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
BS 4999-103:1987 BS 4999-103:1987. General requirements for rotating electrical machines. Specification for symbols
BS 4999-111:1987 BS 4999-111:1987. General requirements for rotating electrical machines. Specification for built-in thermal protection for electric motors rated at 660 volts a.c. and below
BS 4999-141:1987 BS 4999-141:1987. General requirements for rotating electrical machines. Specification for standard dimensions
BS 4999-142:1987 BS 4999-142:1987. General requirements for rotating electrical machines. Specification for mechanical performance: vibration
BS 4999-144:1987 BS 4999-144:1987. General requirements for rotating electrical machines. Specification for the insulation of bars and coils of high voltage machines, including test methods
BS 4651-2:1987, ISO 7108-1985 BS 4651-2:1987, ISO 7108-1985. Ammonia solution. Method for determination of ammonia content
BS 4651-3:1987, ISO 7109-1985 BS 4651-3:1987, ISO 7109-1985. Ammonia solution. Method for determination of residue on evaporation
BS 6710:1987 BS 6710:1987. Specification for dimensions of chain wheel tooth forming tools
BS 3195-3:1987, EN 58:1984 BS 3195-3:1987, EN 58:1984. Methods for sampling petroleum products. Method for sampling bituminous binders
BS CECC 51001:1987 BS CECC 51001:1987. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: mercury wetted change-over contact units, magnetically biased
BS 1125:1987 BS 1125:1987. Specification for WC flushing cisterns (including dual flush cisterns and flush pipes)
BS AU 50:Part 2:Section 7:1987 BS AU 50:Part 2:Section 7:1987. Tyres and wheels. Wheels and rims. Code of practice for the selection and care of wheels for commercial vehicles
BS 5041-1:1987 BS 5041-1:1987. Fire hydrant systems equipment. Specification for landing valves for wet risers
BS 5041-2:1987 BS 5041-2:1987. Fire hydrant systems equipment. Specification for landing valves for dry risers
BS 5982:1987, ISO 6014-1986 BS 5982:1987, ISO 6014-1986. Method for determination of ground speed of earth-moving machinery
BS 6102-10:1987, ISO 8488-1986 BS 6102-10:1987, ISO 8488-1986. Cycles. Specification for screw threads used to assemble head fittings on bicycle forks
BS 6319-9:1987 BS 6319-9:1987. Testing of resin and polymer/cement compositions for use in construction. Method for measurement and classification of peak exotherm temperature
BS 6319-10:1987 BS 6319-10:1987. Testing of resin and polymer/cement compositions for use in construction. Method for measurement of temperature of deflection under a bending stress
BS CECC 96000:1987 BS CECC 96000:1987. Harmonized system of quality assessment for electronic components. Generic specification: electromechanical switches
BS 1902-9.1:1987 BS 1902-9.1:1987. Methods of testing refractory materials. Chemical analysis by instrumental methods. Analysis of alumino-silicate refractories by X-ray fluorescence
BS 1902-9.2:1987 BS 1902-9.2:1987. Methods of testing refractory materials. Chemical analysis by instrumental methods. Analysis of silica refractories by X-ray fluorescence
BS 5685-5:1987 BS 5685-5:1987. Electricity meters. Specification for input and output switching or logic arrangements for multi-rate registers for electricity meters
BS 6168:1987 BS 6168:1987. Specification for non-metallic spur gears
PD 6512-3:1987 PD 6512-3:1987. Use of elements of structural fire protection with particular reference to the recommendations given in BS 5588 'Fire precautions in the design and construction of buildings'. Guide to the fire performance of glass
BS A 297:1987, ISO 7994-1985 BS A 297:1987, ISO 7994-1985. Specification for internal drive, offset cruciform recess (Torq-Set(R)) for rotary fastening devices. Metric series
BS 1432:1987 BS 1432:1987. Specification for copper for electrical purposes: high conductivity copper rectangular conductors with drawn or rolled edges
BS 5993:1987 BS 5993:1987. Specification for leather-covered cricket balls
BS 6782-1:1987, ISO 3251-1974 BS 6782-1:1987, ISO 3251-1974. Binders for paints. Method for determination of volatile and non-volatile content
BS 6782:Part 2:1987, ISO 3681-1983 BS 6782:Part 2:1987, ISO 3681-1983. Binders for paints. Method for determination of saponification value (titrimetric method)
BS 6782:Part 3:1987, ISO 3682-1983 BS 6782:Part 3:1987, ISO 3682-1983. Binders for paints. Method for determination of acid value (titrimetric method)
BS 6782:Part 4:1987, ISO 4629-1978 BS 6782:Part 4:1987, ISO 4629-1978. Binders for paints. Method for determination of hydroxyl value (titrimetric method)
BS 6782:Part 5:1987, ISO 4630-1981 BS 6782:Part 5:1987, ISO 4630-1981. Binders for paints. Method for estimation of colour of clear liquids by the Gardner colour scale
BS 6782-6:1987, ISO 4625-1980 BS 6782-6:1987, ISO 4625-1980. Binders for paints. Method for determination of softening point (ring and ball method)
BS 8203:1987 BS 8203:1987. Code of practice for installation of sheet and tile flooring
BS 4140-23:1987, ISO 8008-1986 BS 4140-23:1987, ISO 8008-1986. Methods of test for aluminium oxide. Determination of specific surface area by nitrogen adsorption (single-point method)
BS 4639:1987 BS 4639:1987. Specification for brakes and braking systems for towed agricultural vehicles
BS 1753:1987 BS 1753:1987. Specification for safety requirements for children's cots for domestic use
BS 4790:1987 BS 4790:1987. Method for determination of the effects of a small source of ignition on textile floor coverings (hot metal nut method)
BS M 64:1987, ISO 8177-1986 BS M 64:1987, ISO 8177-1986. Specification for dimensions of omega clamps (saddle clamps) for fluid tubing installations
BS 6798:1987 BS 6798:1987. Specification for installation of gas-fired hot water boilers of rated input not exceeding 60 kW
BS 6044:1987 BS 6044:1987. Specification for pavement marking paints
BS 6161-14:1987 BS 6161-14:1987. Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of infra-red reflectance
BS 6161:Part 9:1987 BS 6161:Part 9:1987. Methods of test for anodic oxidation coatings on aluminium and its alloys. Measurement of wear properties with an abrasive wheel wear test apparatus
BS 6161-12:1987 BS 6161-12:1987. Methods of test for anodic oxidation coatings on aluminium and its alloys. Measurement of specular reflectance and specular gloss at angles of 20°, 45°, 60° or 85°

BIS Standards Catalogue