BIS Standards Catalogue

BS 7658-2:1993, ISO 10120:1991 BS 7658-2:1993, ISO 10120:1991. Carbon fibre. Method for determination of linear density
BS 6404-12:1993, IEC 60404-12:1992 BS 6404-12:1993, IEC 60404-12:1992. Magnetic materials. Guide to methods of assessment of temperature capability of interlaminar insulation coatings
BS 7644-1:1993 BS 7644-1:1993. Direct tension indicators. Specification for compressible washers
BS ISO/IEC 11159:1992 BS ISO/IEC 11159:1992. Information technology. Office equipment. Minimum information to be included in specification sheets. Copying machines
BS ISO 10459:1992 BS ISO 10459:1992. Textile machinery. Dyeing and finishing machines. Designation of operating ranges of component parts
BS ISO 9903:1991 BS ISO 9903:1991. Textile machinery and accessories. Wires for metallic card clothing
BS ISO 10457:1991 BS ISO 10457:1991. Textile machinery. Dyeing and finishing machines. Nominal speeds
BS ISO 8116-9:1991 BS ISO 8116-9:1991. Textile machinery and accessories. Beams for winding. Dyeing beams for textile fabrics
BS ISO 363:1992 BS ISO 363:1992. Textile machinery and accessories. Flat steel healds with closed end loops. Dimensions
BS ISO 96-2:1992 BS ISO 96-2:1992. Textile machinery and accessories. Rings and travellers for ring spinning and ring doubling frames. HZCH-, HZ- and J- rings and their appropriate travellers
BS ISO 96-1:1992 BS ISO 96-1:1992. Textile machinery and accessories. Rings and travellers for ring spinning and ring doubling frames. T-rings and their appropriate travellers
BS 5724:Part 2:Section 2.28:1993, ISO 10079-1:1991 BS 5724:Part 2:Section 2.28:1993, ISO 10079-1:1991. Medical electrical equipment. Particular requirements for safety. Specification for electrically powered suction equipment
BS 3900-J9:1993, ISO 8130-5:1992 BS 3900-J9:1993, ISO 8130-5:1992. Methods of test for paints. Testing of coating powders. Determination of flow properties of a coating powder/air mixture
BS 3900-J8:1993, ISO 8130-4:1992 BS 3900-J8:1993, ISO 8130-4:1992. Methods of test for paints. Testing of coating powders. Calculation of lower explosion limit of coating powders
BS 3900-J7:1993, ISO 8130-3:1992 BS 3900-J7:1993, ISO 8130-3:1992. Methods of test for paints. Testing of coating powders. Determination of density of coating powders by liquid displacement pyknometer
BS 3900-J6:1993, ISO 8130-2:1992 BS 3900-J6:1993, ISO 8130-2:1992. Methods of test for paints. Testing of coating powders. Determination of density of coating powders by gas comparison pyknometer (referee method)
BS 3900-J5:1993, ISO 8130-7:1992 BS 3900-J5:1993, ISO 8130-7:1992. Methods of test for paints. Testing of coating powders. Determination of loss of mass of coating powders on heating
BS 3900:Part J3:1993, ISO 8130-6:1992 BS 3900:Part J3:1993, ISO 8130-6:1992. Methods of test for paints. Testing of coating powders. Determination of the gelation time of coating powders
BS 3900-J2:1993, ISO 8130-1:1992 BS 3900-J2:1993, ISO 8130-1:1992. Methods of test for paints. Testing of coating powders. Determination of particle size distribution of coating powders by sieving
BS 6186-1:Addendum No. 1:1993, ISO 4156:1981/Amendment 1:1992 BS 6186-1:Addendum No. 1:1993, ISO 4156:1981/Amendment 1:1992. Specification for straight cylindrical involute splines: metric module, side fit. Inspection
BS AU 50-1.4.2a:1993, ISO 4251-2:1992 BS AU 50-1.4.2a:1993, ISO 4251-2:1992. Tyres and wheels. Tyres. Agricultural tractor and machine tyres. Specification for load ratings for ply rating marked series tyres
BS AU 50-1.4.1a:1993, ISO 4251-1:1992 BS AU 50-1.4.1a:1993, ISO 4251-1:1992. Tyres and wheels. Tyres. Agricultural tractor and machine tyres. Specification for designations and dimensions for ply rating marked series tyres
BS EN 60097:1993, IEC 60097:1991 BS EN 60097:1993, IEC 60097:1991. Specification for grid systems for printed circuits
BS 7652-1:1993, ISO 11040-1:1992 BS 7652-1:1993, ISO 11040-1:1992. Prefilled syringes. Specification for glass cylinders for dental local anaesthetic cartridges
BS 7079-D2:1993, ISO 8504-2:1992 BS 7079-D2:1993, ISO 8504-2:1992. Preparation of steel substrates before application of paints and related products. Methods for surface preparation. Abrasive blast-cleaning
BS 7079-D1:1993, ISO 8504-1:1992 BS 7079-D1:1993, ISO 8504-1:1992. Preparation of steel substrates before application of paints and related products. Methods for surface preparation. General principles
BS 5293-17:1993, ISO 4656-1:1992 BS 5293-17:1993, ISO 4656-1:1992. Sampling and testing carbon black for use in the rubber industry. Method for determination of dibutyl phthalate absorption number using an absorptometer
BS EN ISO 4622:1995, BS 3900-C7:1993 BS EN ISO 4622:1995, BS 3900-C7:1993. Paints and varnishes. Pressure test for stackability
BS EN ISO 9514:1995, BS 3900-A18:1993 BS EN ISO 9514:1995, BS 3900-A18:1993. Paints and varnishes. Determination of the pot-life of liquid systems. Preparation and conditioning of samples and guidelines for testing
BS EN 29888:1993, BS 6068-5.13:1993,ISO 9888:1991 BS EN 29888:1993, BS 6068-5.13:1993,ISO 9888:1991. Water quality. Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium. Static test (Zahn-Wellens method)
BS EN 29439:1992, BS 6068-5.12:1993,ISO 9439:1990 BS EN 29439:1992, BS 6068-5.12:1993,ISO 9439:1990. Water quality. Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds: method by analysis of released carbon dioxide
BS EN 29408:1993, BS 6068-5.11:1993,ISO 9408:1991 BS EN 29408:1993, BS 6068-5.11:1993,ISO 9408:1991. Water quality. Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds: method by determining the oxygen demand in a closed respirometer
BS ISO/IEC 9637-2:1992 BS ISO/IEC 9637-2:1992. Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Data stream binding. Binary encoding
BS ISO/IEC 11560:1992 BS ISO/IEC 11560:1992. Information technology. Information interchange on 130 mm optical disk cartridges using the magneto-optical effect, for write once, read multiple functionality
BS EN 26461-2:1993, BS 6068-4.9:1993,ISO 6461-2:1986 BS EN 26461-2:1993, BS 6068-4.9:1993,ISO 6461-2:1986. Water quality. Detection and enumeration of the spores of sulfite-reducing anaerobes (Clostridia). Method by membrane filtration
BS EN 10143:1993 BS EN 10143:1993. Continuously hot-dip metal coated steel sheet and strip. Tolerances on dimensions and shape
BS EN 2155-3:1993 BS EN 2155-3:1993. Specification for test methods for transparent materials for aircraft glazing. Determination of refractive index
BS 7630:1993 BS 7630:1993. Generic specification for symmetric pair/quad and multicore cables for digital communication
BS 4317-28:1993, ISO 7973:1992 BS 4317-28:1993, ISO 7973:1992. Methods of test for cereals and pulses. Determination of viscosity of flour using an amylograph
BS 3970-6:1993 BS 3970-6:1993. Sterilizing and disinfecting equipment for medical products. Specification for sterilizers using low-temperature steam with formaldehyde
BS 3159-2:1993 BS 3159-2:1993. Woodworking saws for hand use. Specification for tenon and dovetail saws
BS 2474:1993 BS 2474:1993. Recommendations for names for chemicals used in industry
BS EN 60687:1993, IEC 60687:1992 BS EN 60687:1993, IEC 60687:1992. Specification for alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S)
BS 4L 100:1993 BS 4L 100:1993. Procedure for inspection, testing and acceptance of wrought aluminium and aluminium alloys
BS 7029-2:1993 BS 7029-2:1993. Method of specifying thermoplastics injection mouldings. Additional requirements for polycarbonate, polyamide and polyethylene mouldings
BS 7029-1:1993 BS 7029-1:1993. Method of specifying thermoplastics injection mouldings. General requirements
DD ENV 41103-1:1993 DD ENV 41103-1:1993. Information systems inter-connection. Provision of the OSI connection-mode transport service using the OSI connection-mode network service in an end system attached to a LAN. LAN subnetwork dependent media independent requirements
BS 7646:1993 BS 7646:1993. Specification for general purpose self-service trolleys
BS 3999-16:1993, IEC 60496:1975 BS 3999-16:1993, IEC 60496:1975. Methods of measuring the performance of household electrical appliances. Electric warming plates
BS 3999:Part 9:1993, IEC 60442:1973 BS 3999:Part 9:1993, IEC 60442:1973. Methods of measuring the performance of household electrical appliances. Electric toasters
BS EN ISO 1513:1995, BS 3900-A2:1993 BS EN ISO 1513:1995, BS 3900-A2:1993. Paints and varnishes. Examination and preparation of samples for testing
BS 903:Part A5:1993, ISO 2285:1988 BS 903:Part A5:1993, ISO 2285:1988. Physical testing of rubber. Method for determination of tension set at normal and high temperatures
BS EN 60335-2-62:1993 BS EN 60335-2-62:1993. Specification for safety of household and similar electrical appliances. Particular requirements. Commercial electric rinsing sinks
BS EN 2155-2:1993 BS EN 2155-2:1993. Specification for test methods for transparent materials for aircraft glazing. Determination of water absorption
BS 328-1:1993 BS 328-1:1993. Drills and reamers. Specification for twist drills
BS 6803-1:1993 BS 6803-1:1993. Vehicle security alarm systems. Specification for installed systems
BS EN 21539:1992, ISO/IEC 1539:1991 BS EN 21539:1992, ISO/IEC 1539:1991. Information technology. Programming languages. FORTRAN
BS ISO 10228:1991 BS ISO 10228:1991. Cross-country skis. Binding mounting area. Requirements for test screws
BS ISO 10045:1991 BS ISO 10045:1991. Alpine skis. Binding mounting area. Requirements for test screws
BS ISO 9838:1991 BS ISO 9838:1991. Alpine ski-bindings. Test soles for ski-binding tests
BS ISO 1997:1992 BS ISO 1997:1992. Granulated cork and cork powder. Classification, properties and packing
DD ENV 41103-5:1993 DD ENV 41103-5:1993. Information systems inter-connection. Provision of the OSI connection-mode transport service using the OSI connection-mode network service in an end system attached to a LAN. Profile TC53 (M-IT-02 profile T/613)
DD ENV 41103-4:1993 DD ENV 41103-4:1993. Information systems inter-connection. Provision of the OSI connection-mode transport service using the OSI connection-mode network service in an end system attached to a LAN. Local area subnetwork-type dependent requirements for the token ring medium access control sublayer and physical layer
DD ENV 41103-3:1993 DD ENV 41103-3:1993. Information systems inter-connection. Provision of the OSI connection-mode transport service using the OSI connection-mode network service in an end system attached to a LAN. Profile TC51 (M-IT-02 profile T/611)
DD ENV 41103-2:1993 DD ENV 41103-2:1993. Information systems inter-connection. Provision of the OSI connection-mode transport service using the OSI connection-mode network service in an end system attached to a LAN. ISO 8802-3 CSMA/CD subnetwork dependent media requirements
BS EN 28654:1993, ISO 8654:1987 BS EN 28654:1993, ISO 8654:1987. Colours of gold alloys. Definition, range of colours and designation
BS 7645:1993, IEC 60757:1983 BS 7645:1993, IEC 60757:1983. Code for designation of colours
BS 7638:1993, IEC 60781:1989 BS 7638:1993, IEC 60781:1989. Application guide for calculation of short-circuit currents in low-voltage radial systems
BS 7624:1993 BS 7624:1993. Specification for installation of domestic direct gas-fired tumble dryers of up to 3kW heat input (2nd and 3rd family gases)
PD 6570-2:1992 PD 6570-2:1992. Draft standard to match to and work with ETS 300 001/NET4 "Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks run by certain public telecommunications operators". Specification for cordless telephone apparatus using radio links
BS 3999-1:1993, IEC 60530:1975 BS 3999-1:1993, IEC 60530:1975. Methods of measuring the performance of household electrical appliances. Electric kettles and jugs
BS 3502-3:1993 BS 3502-3:1993. Symbols for plastics and rubber materials. Schedule for symbols for compounding ingredients
BS 6548-4:1993, IEC 60706-4:1992 BS 6548-4:1993, IEC 60706-4:1992. Maintainability of equipment. Guide to the planning of maintenance and maintenance support
BS EN 61143-2:1994 BS EN 61143-2:1994. Specification for electrical measuring instruments. X-t recorders. Recommended additional test methods
BS EN 137:1993 BS EN 137:1993. Specification for respiratory protective devices: self-contained open-circuit compressed air breathing apparatus
BS ISO TR 9547:1988 BS ISO TR 9547:1988. Programming language processors. Test methods. Guidelines for their development and acceptability
BS ISO/IEC 10164-4:1992 BS ISO/IEC 10164-4:1992. Information technology. Open systems interconnection. Systems management. Alarm reporting function
BS EN 61100:1993, IEC 61100:1992 BS EN 61100:1993, IEC 61100:1992. Classification of insulating liquids according to fire point and net calorific value
BS 1042:Part 1:Section 1.6:1993, ISO TR 3313:1992 BS 1042:Part 1:Section 1.6:1993, ISO TR 3313:1992. Measurement of fluid flow in closed conduits. Pressure differential devices. Method of measurement of pulsating fluid flow in a pipe, by means of orifice plates, nozzles or Venturi tubes
BS 5426:1993 BS 5426:1993. Specification for workwear and career wear
BS 6068-6.9:1993, ISO 5667-9:1992 BS 6068-6.9:1993, ISO 5667-9:1992. Water quality. Sampling. Guidance on sampling from marine waters
BS 6441:1993, ISO 91-1:1992 BS 6441:1993, ISO 91-1:1992. Schedule for petroleum measurement tables
BS QC 301701:1992, IEC 60384-12-1:1988 BS QC 301701:1992, IEC 60384-12-1:1988. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed polycarbonate film dielectric metal foil d.c. capacitors. Assessment level E
BS CECC 30301:1993 BS CECC 30301:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Aluminium electrolytic capacitors with non-solid electrolyte. (Assessment level E)
BS QC 300801:1993 BS QC 300801:1993. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed tantalum chip capacitors. Assessment level E
BS QC 300101:1993, IEC 60384-11-1:1988 BS QC 300101:1993, IEC 60384-11-1:1988. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors. Assessment level E
BS ISO/IEC 10026-2:1992 BS ISO/IEC 10026-2:1992. Information technology. Open systems interconnection. Distributed transaction processing. OSI TP service
BS EN 412:1993 BS EN 412:1993. Specification for protective aprons for use with hand knives
BS EN 510:1993 BS EN 510:1993. Specification for protective clothing for use where there is a risk of entanglement with moving parts
BS EN 23994:1993, ISO 3994:1977 BS EN 23994:1993, ISO 3994:1977. Plastics products. Hose of polymer reinforced thermoplastics for suction and discharge
BS EN 28028:1993, ISO 8028:1987 BS EN 28028:1993, ISO 8028:1987. Rubber and/or plastics hose assemblies for airless paint spraying. Specification
BS EN 28031:1993, ISO 8031:1987 BS EN 28031:1993, ISO 8031:1987. Rubber and plastics hoses and hose assemblies. Determination of electrical resistance
BS EN 28653:1993 BS EN 28653:1993. Jewellery. Ring-sizes. Definition, measurement and designation
BS ISO/IEC 10026-1:1992 BS ISO/IEC 10026-1:1992. Information technology. Open systems interconnection. Distributed transaction processing. OSI TP model
BS EN 61180-1:1995, IEC 61180-1:1992 BS EN 61180-1:1995, IEC 61180-1:1992. High-voltage test techniques for low-voltage equipment. Definitions, test and procedure requirements
BS 6911-8:1993, ISO 10266:1992 BS 6911-8:1993, ISO 10266:1992. Testing earth-moving machinery. Determination of slope limits for machine fluid systems operation (static test method)
BS 2782-6:Method 631A:1993, ISO 4591:1992 BS 2782-6:Method 631A:1993, ISO 4591:1992. Methods of testing plastics. Dimensional properties. Determination of gravimetric thickness and yield of flexible sheet
BS 2782-6:Method 632A:1993, ISO 4592:1992 BS 2782-6:Method 632A:1993, ISO 4592:1992. Methods of testing plastics. Dimensional properties. Determination of length and width of flexible sheet
BS 3680-2B:1993, ISO 9555-2:1992 BS 3680-2B:1993, ISO 9555-2:1992. Measurement of liquid flow in open channels. Dilution methods. Methods of measurement using radioactive tracers
BS 3680-2D:1993, ISO 9555-4:1992 BS 3680-2D:1993, ISO 9555-4:1992. Measurement of liquid flow in open channels. Dilution methods. Methods of measurement using fluorescent tracers
BS 5594:1993, ISO 4347:1992 BS 5594:1993, ISO 4347:1992. Specification for leaf chains, clevises and sheaves
BS QC 300601:1993, IEC 60384-8-1:1988 BS QC 300601:1993, IEC 60384-8-1:1988. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors of ceramic dielectric, class 1. Assessment level E
BS QC 300301:1993 BS QC 300301:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed capacitors for use in electronic equipment. Aluminium electrolytic capacitors with non-solid electrolyte. Assessment level E
BS QC 790105:1993, IEC 60748-2-7:1992 BS QC 790105:1993, IEC 60748-2-7:1992. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Blank detail specification. Integrated circuit fusible-link programmable bipolar read-only memories
PD 6534:1993 PD 6534:1993. Guide to the use in the UK of DD ENV 206:1992. Concrete. Performance, production, placing and compliance criteria
BS ISO 10834:1992 BS ISO 10834:1992. Textile floor coverings. Non-destructive measurement of pile thickness above the backing. WRONZ gauge method
BS ISO 10833:1992 BS ISO 10833:1992. Textile floor coverings. Determination of mechanical damage at a cut edge. Modified Vettermann drum tester method
DD ENV 41215:1993 DD ENV 41215:1993. Information technology. Functional standard for profile A/DI32. Directory. Behaviour of DSAs for distributed operations
BS 7643-3:1993, ISO 6242-3:1992 BS 7643-3:1993, ISO 6242-3:1992. Building construction. Expression of users' requirements. Acoustical requirements
BS 7643-2:1993, ISO 6242-2:1992 BS 7643-2:1993, ISO 6242-2:1992. Building construction. Expression of users' requirements. Air purity requirements
BS 7643-1:1993, ISO 6242-1:1993 BS 7643-1:1993, ISO 6242-1:1993. Building construction. Expression of users' requirements. Thermal requirements
BS 7634:1993, ISO 10083:1992 BS 7634:1993, ISO 10083:1992. Specification for oxygen concentrators for use with medical gas pipeline systems
BS 7608:1993 BS 7608:1993. Code of practice for fatigue design and assessment of steel structures
BS 4317-13:1993, ISO 5529:1992 BS 4317-13:1993, ISO 5529:1992. Methods of test for cereals and pulses. Determination of sedimentation index for wheat (Zeleny test)
BS 2782-3:Method 327A:1993 BS 2782-3:Method 327A:1993. Methods of testing plastics. Mechanical properties. Determination of tensile strength and elongation at break of polytetrafluoroethylene (PTFE) products
BS 2646-5:1993 BS 2646-5:1993. Autoclaves for sterilization in laboratories. Methods of test for function and performance
BS 2646-1:1993 BS 2646-1:1993. Autoclaves for sterilization in laboratories. Specification for design, construction, safety and performance
BS 7632:1993, IEC 60594:1977 BS 7632:1993, IEC 60594:1977. Internal fuses and internal overpressure disconnectors for capacitors for inductive heat generating plants
DD ENV 41214:1993 DD ENV 41214:1993. Information technology. Functional standard for profile A/MH11. Message Handling Systems (1988 and later). Common facilities. MTA and MTS
BS 5192-2:1993 BS 5192-2:1993. Guide to production control. Production programming
BS 6728-2:1993 BS 6728-2:1993. Thermoplastics hot water bottles. Specification for hot water bottles manufactured from polyolefin materials
BS EN 473:1993 BS EN 473:1993. General principles for qualification and certification of NDT personnel
BS EN 60204-1:1993 BS EN 60204-1:1993. Safety of machinery. Electrical equipment of machines. Specification for general requirements
BS 4325:Part 8:1993, ISO 5504:1992 BS 4325:Part 8:1993, ISO 5504:1992. Methods for analysis of oilseed residues. Determination of total isothiocyanate content and vinylthiooxazolidone content
BS 6068-6.10:1993, ISO 5667-10:1992 BS 6068-6.10:1993, ISO 5667-10:1992. Water quality. Sampling. Guidance on sampling of waste waters
BS 6068-3.2:1993, ISO 9697:1992 BS 6068-3.2:1993, ISO 9697:1992. Water quality. Radiological methods. Measurement of gross beta activity in non-saline water
BS 6068-3.1:1993, ISO 9696:1992 BS 6068-3.1:1993, ISO 9696:1992. Water quality. Radiological methods. Measurement of gross alpha activity in non-saline water: thick source method
BS 6068-2.41:1993, ISO 10359-1:1992 BS 6068-2.41:1993, ISO 10359-1:1992. Water quality. Physical, chemical and biochemical methods. Determination of fluoride: electrochemical probe method for potable and lightly polluted water
BS 7522-2:1993 BS 7522-2:1993. Low vision aids. Specification for spectacle magnifiers and similar devices
BS 7637:1993, ISO 10285:1992 BS 7637:1993, ISO 10285:1992. Specification for linear motion, recirculating ball, sleeve type rolling bearings (metric series)
BS 7641:1993, ISO 9836:1992 BS 7641:1993, ISO 9836:1992. Performance standards in building. Definition and calculation of area and space indicators
BS 7642:1993, ISO 7162:1992 BS 7642:1993, ISO 7162:1992. Performance standards in building. Contents and format of standards for evaluation of performance
BS 5775-13:1993, ISO 31-13:1992 BS 5775-13:1993, ISO 31-13:1992. Specification for quantities, units and symbols. Solid state physics
BS 5775-12:1993, ISO 31-12:1992 BS 5775-12:1993, ISO 31-12:1992. Specification for quantities, units and symbols. Characteristic numbers
BS 5775-10:1993, ISO 31-10:1992 BS 5775-10:1993, ISO 31-10:1992. Specification for quantities, units and symbols. Nuclear reactions and ionizing radiations
BS 5775-9:1993, ISO 31-9:1992 BS 5775-9:1993, ISO 31-9:1992. Specification for quantities, units and symbols. Atomic and nuclear physics
BS 5775-7:1993, ISO 31-7:1992 BS 5775-7:1993, ISO 31-7:1992. Specification for quantities, units and symbols. Acoustics
BS 5775-6:1993, ISO 31-6:1992 BS 5775-6:1993, ISO 31-6:1992. Specification for quantities, units and symbols. Light and related electromagnetic radiations
BS 5775-5:1993, ISO 31-5:1992 BS 5775-5:1993, ISO 31-5:1992. Specification for quantities, units and symbols. Electricity and magnetism
BS 5775-4:1993, ISO 31-4:1992 BS 5775-4:1993, ISO 31-4:1992. Specification for quantities, units and symbols. Heat
BS 5775-3:1993, ISO 31-3:1992 BS 5775-3:1993, ISO 31-3:1992. Specification for quantities, units and symbols. Mechanics
BS 5775-2:1993, ISO 31-2:1992 BS 5775-2:1993, ISO 31-2:1992. Specification for quantities, units and symbols. Periodic and related phenomena
BS 5775-1:1993, ISO 31-1:1992 BS 5775-1:1993, ISO 31-1:1992. Specification for quantities, units and symbols. Space and time
BS CECC 30501:1993 BS CECC 30501:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed metallized polycarbonate film dielectric capacitors for direct current
BS EN 10028-2:1993 BS EN 10028-2:1993. Specification for flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties
BS EN 10028-1:1993 BS EN 10028-1:1993. Specification for flat products made of steels for pressure purposes. General requirements
BS 1941:1993 BS 1941:1993. Specification for 4-methylpentan-2-one (isobutyl methyl ketone) for industrial use
BS 7631:1993, IEC 60593:1977 BS 7631:1993, IEC 60593:1977. Internal fuses and internal overpressure disconnectors for shunt capacitors
BS 7311-2:1993 BS 7311-2:1993. Cabinet towels. Specification for processing
BS 5555:1993, ISO 1000:1992 BS 5555:1993, ISO 1000:1992. Specification for SI units and recommendations for the use of their multiples and of certain other units
BS 2000-342:1993 BS 2000-342:1993. Methods of test for petroleum and its products. Gasoline, kerosine and distillate fuels. Determination of mercaptan sulfur. Potentiometric method
BS 2000:Part 336:1993 BS 2000:Part 336:1993. Methods of test for petroleum and its products. Petroleum products. Determination of sulfur content. Energy-dispersive X-ray fluorescence method
BS 2000-313:1993 BS 2000-313:1993. Methods of test for petroleum and its products. Determination of air release value of hydraulic, turbine and lubricating oils
BS 2000-306:1993 BS 2000-306:1993. Methods of test for petroleum and its products. Determination of oxidation stability of straight mineral oil
BS 2000-288:1993 BS 2000-288:1993. Methods of test for petroleum and its products. Determination of nickel, sodium and vanadium. Atomic absorption spectroscopy method
BS 2000-284:1993 BS 2000-284:1993. Methods of test for petroleum and its products. Determination of saponifiable and unsaponifiable matter in oils, fats and waxes
BS 2000-281:1993 BS 2000-281:1993. Methods of test for petroleum and its products. Determination of anti-wear properties of hydraulic fluids. Vane pump method
BS 2000-272:1993 BS 2000-272:1993. Methods of test for petroleum and its products. Determination of mercaptan sulfur and hydrogen sulfide content of LPG. Electrometric titration method
BS 2000:Part 230:1993 BS 2000:Part 230:1993. Methods of test for petroleum and its products. Determination of minimum handling and storage temperatures of fuel oil. Ferranti viscometer method
BS 2000-223:1993 BS 2000-223:1993. Methods of test for petroleum and its products. Determination of ash of petroleum products containing mineral matter
BS 2000:Part 220:1993 BS 2000:Part 220:1993. Methods of test for petroleum and its products. Determination of rust prevention characteristics of lubricating greases
BS 2000-213:1993 BS 2000-213:1993. Methods of test for petroleum and its products. Determination of neutralization value of bitumen. Colour indicator titration method
BS 2000:Part 195:1993 BS 2000:Part 195:1993. Methods of test for petroleum and its products. Determination of distillation characteristics of volatile organic liquids
BS 2000-182:1993 BS 2000-182:1993. Methods of test for petroleum and its products. Determination of inorganic acidity of petroleum products. Colour indicator titration method
BS 2000-179:1993 BS 2000-179:1993. Methods of test for petroleum and its products. Determination of cone penetration of petrolatum
BS 2000:Part 177:1993 BS 2000:Part 177:1993. Methods of test for petroleum and its products. Determination of neutralization number. Potentiometric titration method
BS 2000-168:1993 BS 2000-168:1993. Methods of test for petroleum and its products. Determination of rolling bearing performance of lubricating grease
BS 2000:Part 163:1993 BS 2000:Part 163:1993. Methods of test for petroleum and its products. Determination of sulfated ash of lubricating oils and additives
BS 2000:Part 156:1993 BS 2000:Part 156:1993. Methods of test for petroleum and its products. Determination of hydrocarbon types. Fluorescent indicator adsorption method
BS 2000:Part 154:1993 BS 2000:Part 154:1993. Methods of test for petroleum and its products. Petroleum products. Corrosiveness to copper. Copper strip test
BS 2000-149:1993 BS 2000-149:1993. Methods of test for petroleum and its products. Petroleum products. Lubricating oils and additives. Determination of phosphorus content. Quinoline phosphomolybdate method
BS 2000:Part 146:1993 BS 2000:Part 146:1993. Methods of test for petroleum and its products. Determination of foaming characteristics of lubricating oils
BS 2000:Part 143:1993 BS 2000:Part 143:1993. Methods of test for petroleum and its products. Determination of asphaltenes (heptane insolubles)
BS 2000-142:1993 BS 2000-142:1993. Methods of test for petroleum and its products. Determination of oxidation stability of lubricating grease. Oxygen bomb method
BS 2000:Part 139:1993 BS 2000:Part 139:1993. Methods of test for petroleum and its products. Petroleum products and lubricants. Neutralization number. Colour-indicator titration method
BS 2000:Part 138:1993 BS 2000:Part 138:1993. Methods of test for petroleum and its products. Determination of oxidation stability of aviation fuel. Potential residue method
BS 2000-137:1993 BS 2000-137:1993. Methods of test for petroleum and its products. Determination of oil content of water mix metalworking oil dilutions
BS 2000:Part 136:1993 BS 2000:Part 136:1993. Methods of test for petroleum and its products. Determination of saponification number. Titration method
BS 2000-135:1993 BS 2000-135:1993. Methods of test for petroleum and its products. Determination of rust-preventing characteristics of steam-turbine oil in the presence of water
BS 2000-133:1993 BS 2000-133:1993. Methods of test for petroleum and its products. Determination of drop melting point of wax and petrolatum
BS 2000:Part 132:1993 BS 2000:Part 132:1993. Methods of test for petroleum and its products. Determination of dropping point of lubricating grease
BS 2000-129:1993 BS 2000-129:1993. Methods of test for petroleum and its products. Determination of bromine number. Colour indicator titration method
BS 2000-121:1993 BS 2000-121:1993. Methods of test for petroleum and its products. Determination of oil separation from lubricating grease. Pressure filtration method
BS 2000-112:1993 BS 2000-112:1993. Methods of test for petroleum and its products. Determination of corrosiveness to copper of lubricating grease. Copper strip method
BS 2000-107:1993 BS 2000-107:1993. Methods of test for petroleum and its products. Determination of sulfur. Lamp combustion method
BS 2000-76:1993 BS 2000-76:1993. Methods of test for petroleum and its products. Determination of congealing point of waxes and petrolatum
BS 2000-72:1993 BS 2000-72:1993. Methods of test for petroleum and its products. Determination of viscosity of cutback bitumen
BS 2000-61:1993 BS 2000-61:1993. Methods of test for petroleum and its products. Determination of sulfur. Bomb method
BS 2000-58:1993 BS 2000-58:1993. Methods of test for petroleum and its products. Determination of softening point of bitumen. Ring and ball method
BS 2000:Part 57:1993 BS 2000:Part 57:1993. Methods of test for petroleum and its products. Determination of smoke point
BS 2000-50:1993 BS 2000-50:1993. Methods of test for petroleum and its products. Determination of cone penetration of lubricating grease
BS 2000-49:1993 BS 2000-49:1993. Methods of test for petroleum and its products. Determination of needle penetration of bituminous material
BS 2000:Part 48:1993 BS 2000:Part 48:1993. Methods of test for petroleum and its products. Determination of oxidation characteristics of lubricating oil
BS EN 2556:1993 BS EN 2556:1993. Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series
BS EN 2555:1993 BS EN 2555:1993. Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, inch based series
BS EN 2553:1993 BS EN 2553:1993. Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2017A, inch based series
BS EN 2552:1993 BS EN 2552:1993. Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, anodized or chromated, inch based series
BS EN 2551:1993 BS EN 2551:1993. Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, inch based series
BS 7626:1993 BS 7626:1993. Specification for current transformers
BS 7625:1993 BS 7625:1993. Specification for voltage transformers
BS 6005:1993 BS 6005:1993. Specification for moulded transparent polycarbonate bowls used in compressed air filters and lubricators
BS 5551-4.5:1993, ISO 10084:1992 BS 5551-4.5:1993, ISO 10084:1992. Fertilizers. Chemical analysis. Method for determination of mineral-acid-soluble sulfate content of solid fertilizers
BS 5551-2.10:1993, ISO 5308:1992 BS 5551-2.10:1993, ISO 5308:1992. Fertilizers. Sampling. Method of checking the performance of mechanical devices for sampling of solid fertilizer moving in bulk
BS 5551-2.1:1993, ISO 8633:1992 BS 5551-2.1:1993, ISO 8633:1992. Fertilizers. Sampling. Simple sampling method for small lots of solid fertilizer
BS 5080-1:1993 BS 5080-1:1993. Structural fixings in concrete and masonry. Method of test for tensile loading
BS 2000-47:1993 BS 2000-47:1993. Methods of test for petroleum and its products. Solubility of bituminous binders
BS 2000-45:1993 BS 2000-45:1993. Methods of test for petroleum and its products. Determination of loss on heating of bitumen and flux oil
BS 2000-35:1993 BS 2000-35:1993. Methods of test for petroleum and its products. Determination of open flash and fire point. Pensky-Martens method
BS 2000-27:1993 BS 2000-27:1993. Methods of test for petroleum and its products. Determination of distillation characteristics of cutback bitumen
BS 2000-19:1993 BS 2000-19:1993. Methods of test for petroleum and its products. Determination of demulsibility characteristics of lubricating oil
BS 2000:Part 15:1993 BS 2000:Part 15:1993. Methods of test for petroleum and its products. Determination of pour point
BS 2000-12:1993 BS 2000-12:1993. Methods of test for petroleum and its products. Determination of specific energy
BS 2000:Part 10:1993 BS 2000:Part 10:1993. Methods of test for petroleum and its products. Determination of kerosine burning characteristics. 24 hour method
BS 2000:Part 1:1993 BS 2000:Part 1:1993. Methods of test for petroleum and its products. Determination of acidity
BS 2000:Part 280:1992 BS 2000:Part 280:1992. Methods of test for petroleum and its products. Determination of oxidation stability of inhibited mineral turbine oils
BS 2000:Part 170:1992 BS 2000:Part 170:1992. Methods of test for petroleum and its products. Determination of flash point. Abel closed cup method
BS 2000:Part 40:1992 BS 2000:Part 40:1992. Methods of test for petroleum and its products. Determination of oxidation stability of gasoline. Induction period method
BS EN ISO 1207:1994 BS EN ISO 1207:1994. Slotted cheese head screws. Product grade A
BS AU 248:1993, ISO 9981:1990 BS AU 248:1993, ISO 9981:1990. Specification for automotive V-ribbed belt drives. Dimensions of pulleys and belts of PK profile
BS EN 22872:1993, ISO 2872:1985 BS EN 22872:1993, ISO 2872:1985. Complete, filled transport packages. Method for determination of resistance to compression
BS EN 2550:1993 BS EN 2550:1993. Rivets, solid 100° normal countersunk head, in aluminium 1050A, inch based series
BS EN 2149:1993 BS EN 2149:1993. Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series
BS EN 2148:1993 BS EN 2148:1993. Rivets, solid, universal head, in aluminium alloy 5056A, inch based series
BS EN 2146:1993 BS EN 2146:1993. Rivets, solid, universal head, in aluminium alloy 2017A, inch based series
BS EN 2143:1993 BS EN 2143:1993. Rivets, solid, universal head, in aluminium 1050A, inch based series
BS 7633:1993, IEC 60595:1977 BS 7633:1993, IEC 60595:1977. Internal fuses for series capacitors
BS 7087-17:1993 BS 7087-17:1993. Herbs and spices ready for food use. Specification for chillies (whole and ground)
BS 7087-16:1993 BS 7087-16:1993. Herbs and spices ready for food use. Specification for oregano (whole, rubbed and ground)
BS 949-3:1993 BS 949-3:1993. Screwing taps. Specification for pipe thread taps
BS 6450-6.1:1993 BS 6450-6.1:1993. Private branch exchanges for connection to public switched telephone networks run by certain public telecommunications operators. Simple call-routeing mode (SCRM). Specification for the simple call-routeing mode of PBX operation, with terminating stations treated as an entirety
BS CECC 30801:1993 BS CECC 30801:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Tantalum surface mounting capacitors
BS CECC 30702:1993 BS CECC 30702:1993. Specification for harmonized system for quality assessment for electronic components. Blank detail specification. Fixed capacitors of ceramic dielectric, class 2. (Assessment level P. Telecom level)
BS CECC 30701:1993 BS CECC 30701:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed capacitors of ceramic dielectric, class 2. (Assessment level E)
BS EN 364:1993 BS EN 364:1993. Personal protective equipment against falls from a height. Test methods
PD 6533:1993 PD 6533:1993. Guide to methods for assessing the durability of geotextiles. An interim document
BS 5G 178-1:1993 BS 5G 178-1:1993. Crimped joints for aircraft electrical cables and wires. Specification for design requirements (including tests) for components and tools
BS EN 60567:1993, IEC 60567:1992 BS EN 60567:1993, IEC 60567:1992. Guide for the sampling of gases and of oil from oil-filled electrical equipment and for the analysis of free and dissolved gases
BS EN 29202:1993, ISO 9202:1991 BS EN 29202:1993, ISO 9202:1991. Jewellery. Fineness of precious metal alloys
BS EN 401:1993 BS EN 401:1993. Respiratory protective devices for self-rescue. Self-contained closed-circuit breathing apparatus. Chemical oxygen (KO2) escape apparatus. Requirements, testing, marking
BS EN 400:1993 BS EN 400:1993. Respiratory protective devices for self-rescue. Self-contained closed-circuit breathing apparatus. Compressed oxygen escape apparatus. Requirements, testing, marking
BS 7588:1993 BS 7588:1993. Guide to hierarchical interconnection technology
BS 7371-2:1993 BS 7371-2:1993. Coatings on metal fasteners. Specification for torque/clamping force relationship
BS 6450-2:1993 BS 6450-2:1993. Private branch exchanges for connection to public switched telephone networks run by certain public telecommunications operators. Specification for private branch exchanges with terminating stations treated as an entirety
BS EN 360:1993 BS EN 360:1993. Personal protective equipment against falls from a height. Retractable type fall arresters
BS 5192-1:1993 BS 5192-1:1993. Guide to production control. Introduction
BS EN 365:1993 BS EN 365:1993. Personal protective equipment against falls from a height. General requirements for instructions for use and for marking
BS EN 363:1993 BS EN 363:1993. Personal protective equipment against falls from a height. Fall arrest systems
BS EN 362:1993 BS EN 362:1993. Personal protective equipment against falls from a height. Connectors
BS EN 361:1993 BS EN 361:1993. Personal protective equipment against falls from a height. Full body harnesses
BS EN 358:1993 BS EN 358:1993. Personal equipment for work positioning and prevention of falls from a height. Work positioning systems
BS EN 355:1993 BS EN 355:1993. Personal protective equipment against falls from a height. Energy absorbers
BS EN 354:1993 BS EN 354:1993. Personal protective equipment against falls from a height. Lanyards
BS EN 353-2:1993 BS EN 353-2:1993. Personal protective equipment against falls from a height. Specification for guided type fall arresters on a flexible anchorage line
BS EN 353-1:1993 BS EN 353-1:1993. Personal protective equipment against falls from a height. Specification for guided type fall arresters on a rigid anchorage line
BS 4366:1993 BS 4366:1993. Specification for industrial nitrogen
BS 1000:Auxiliaries I(e):Part 3:1993 BS 1000:Auxiliaries I(e):Part 3:1993. Universal Decimal Classification. English full edition. Auxiliary table I(e). Common auxiliaries of place (5/9) Asia, Africa, the Americas, Pacific and circumpolar territories
BS EN 60994:1993, IEC 60994:1991 BS EN 60994:1993, IEC 60994:1991. Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)
BS EN 26591-1:1993 BS EN 26591-1:1993. Packaging. Sacks. Description and method of measurement. Empty paper sacks
BS EN 26590-2:1993 BS EN 26590-2:1993. Packaging. Sacks. Vocabulary and types. Sacks made from thermoplastic flexible film
BS 7628:1993 BS 7628:1993. Specification for combined transformers
BS 6356-7:1993 BS 6356-7:1993. Spraying equipment for crop protection. Guide for typical data sheet layout
BS 5760-10.1:1993, IEC 60605-1:1978 BS 5760-10.1:1993, IEC 60605-1:1978. Reliability of systems, equipment and components. Guide to reliability testing. General requirements
BS 4364:1993 BS 4364:1993. Specification for industrial oxygen
BS EN 26591-2:1993 BS EN 26591-2:1993. Packaging. Sacks. Description and method of measurement. Empty sacks made from thermoplastic flexible film
BS EN 26590-1:1993 BS EN 26590-1:1993. Packaging. Sacks. Vocabulary and types. Paper sacks
BS EN 26599-1:1993, ISO 6599/1:1983 BS EN 26599-1:1993, ISO 6599/1:1983. Packaging. Sacks. Conditioning for testing. Paper sacks
BS EN 27023:1993, ISO 7023:1983 BS EN 27023:1993, ISO 7023:1983. Packaging. Sacks. Method of sampling empty sacks for testing
BS EN 27965-1:1993, ISO 7965-1:1984 BS EN 27965-1:1993, ISO 7965-1:1984. Packaging. Sacks. Drop test. Paper sacks
DD ENV 606:1993 DD ENV 606:1993. Bar coded transport and handling labels for steel products
DD ENV 328:1993 DD ENV 328:1993. Heat exchangers. Test procedures for establishing performance of unit air coolers for refrigeration
BS 7622-1:1993 BS 7622-1:1993. Measurement of smoke density of electric cables burning under defined conditions. Test apparatus
BS 6912:Part 10:1993, ISO 5010:1992 BS 6912:Part 10:1993, ISO 5010:1992. Safety of earth-moving machinery. Specification for steering capability of rubber tyred earth-moving machines
BS 4172:Part 2:1993 BS 4172:Part 2:1993. Hand-held pressurized aerosol dispensers against houseflies. Method for determination of insecticidal efficiency
BS 4172:Part 1:1993 BS 4172:Part 1:1993. Hand-held pressurized aerosol dispensers against houseflies. Specification for insecticidal efficiency
BS 6586-1:1993 BS 6586-1:1993. Rigid polyurethane (PUR) foam produced by the press injection method. Specification for PUR foam for insulated panels for transport containers and insulated vehicles bodies
BS 6161-13:1993, ISO 10215:1992 BS 6161-13:1993, ISO 10215:1992. Methods of test for anodic oxidation coatings on aluminium and its alloys. Visual determination of image clarity. Chart scale method
BS 4881:1993 BS 4881:1993. Specification for polypropylene film cords, lines and twines
BS QC 301801:1993, IEC 60384-13-1:1991 BS QC 301801:1993, IEC 60384-13-1:1991. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed polypropylene film dielectric metal foil d.c. capacitors. Assessment level E
BS CECC 31601:1993 BS CECC 31601:1993. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed capacitors with paper or paper/plastic dielectrics
BS EN 28317:1993, ISO 8317:1989 BS EN 28317:1993, ISO 8317:1989. Child-resistant packaging. Requirements and testing procedures for reclosable packages
BS 6161-19:1993, ISO 10216:1992 BS 6161-19:1993, ISO 10216:1992. Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of image clarity. Instrumental method
BS 7622-2:1993 BS 7622-2:1993. Measurement of smoke density of electric cables burning under defined conditions. Test procedure and requirements
BS 7616:1993 BS 7616:1993. Specification for bushings for liquid filled transformers above 1 kV and up to 36 kV
BS 7252-9:1993, ISO 5832-9:1992 BS 7252-9:1993, ISO 5832-9:1992. Metallic materials for surgical implants. Specification for high-nitrogen stainless steel
BS 6450-5.1:1993 BS 6450-5.1:1993. Private branch exchanges for connection to the British Telecommunications public switched telephone network. Facilities on private branch exchanges. Specification for facilities on private branch exchanges with terminating stations treated as an entirety
BS 6450-1:1993 BS 6450-1:1993. Private branch exchanges for connection to public switched telephone networks run by certain public telecommunications operators. Specification for general requirements
BS 4730:1993 BS 4730:1993. Specification for UK 7-bit coded character set
BS 1524:1993 BS 1524:1993. Specification for cellulose acetate moulding materials
BS ISO/IEC 10744:1992 BS ISO/IEC 10744:1992. Information technology. Hypermedia/Time-based structuring language (HyTime)
BS ISO/IEC TR 9573-11:1992 BS ISO/IEC TR 9573-11:1992. Information processing. SGML support facilities. Techniques for using SGML. Application at ISO Central Secretariat for International Standards and Technical Reports
BS EN 50066:1993 BS EN 50066:1993. Specification for mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles
BS EN 405:1993 BS EN 405:1993. Respiratory protective devices. Valved filtering half masks to protect against gases or gases and particles
BS EN 368:1993 BS EN 368:1993. Protective clothing. Protection against liquid chemicals. Test method: resistance of materials to penetration by liquids
BS EN 145-2:1993 BS EN 145-2:1993. Respiratory protective devices. Self-contained closed-circuit compressed oxygen breathing apparatus. Specification for apparatus for special use
BS 6093:1993 BS 6093:1993. Code of practice for design of joints and jointing in building construction
BS 5551:Part 3:Section 3.2:1993, ISO 5311:1992 BS 5551:Part 3:Section 3.2:1993, ISO 5311:1992. Fertilizers. Physical properties. Method for determination of bulk density (tapped)
BS 5551:Part 3:Section 3.1:1993, ISO 3944:1992 BS 5551:Part 3:Section 3.1:1993, ISO 3944:1992. Fertilizers. Physical properties. Method for determination of bulk density (loose)
BS 3297-2:1993, IEC 60273:1990 BS 3297-2:1993, IEC 60273:1990. Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V
BS EN 21942-2:1993, ISO 1942-2:1989 BS EN 21942-2:1993, ISO 1942-2:1989. Dental vocabulary. Dental materials
BS 7370-4:1993 BS 7370-4:1993. Grounds maintenance. Recommendations for maintenance of soft landscape (other than amenity turf)
BS 7087-15:1993 BS 7087-15:1993. Herbs and spices ready for food use. Specification for cinnamon (whole and ground)
BS 6425-2:1993 BS 6425-2:1993. Test on gases evolved during the combustion of materials from cables. Determination of degree of acidity (corrosivity) of gases by measuring pH and conductivity
BS 6001-3:1993, ISO 2859-3:1991 BS 6001-3:1993, ISO 2859-3:1991. Sampling procedures for inspection by attributes. Specification for skip-lot procedures
BS 6001-2:1993, ISO 2859-2:1985 BS 6001-2:1993, ISO 2859-2:1985. Sampling procedures for inspection by attributes. Specification for sampling plans indexed by limiting quality (LQ) for isolated lot inspection
BS 142-1.4.4:1993, IEC 60255-22-4:1992 BS 142-1.4.4:1993, IEC 60255-22-4:1992. Electrical protection relays. Information and requirements for all protection relays. Specification for electrical disturbance tests. Fast transient disturbance test
BS EN 60387:1993, IEC 60387:1992 BS EN 60387:1993, IEC 60387:1992. Specification for symbols for alternating-current electricity meters
BS 3680-10E:1993, ISO 9195:1992 BS 3680-10E:1993, ISO 9195:1992. Measurement of liquid flow in open channels. Sediment transport. Sampling and analysis of gravel bed material
BS QC 300901:1992, IEC 60384-7-1:1991 BS QC 300901:1992, IEC 60384-7-1:1991. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed polystyrene film dielectric metal foil d.c. capacitors. Assessment level E
BS 1204:1993 BS 1204:1993. Specification for type MR phenolic and aminoplastic synthetic resin adhesives for wood
BS ISO/IEC 10040:1992 BS ISO/IEC 10040:1992. Information technology. Open systems interconnection. Systems management overview
BS 3680-3E:1993, ISO 6416:1992 BS 3680-3E:1993, ISO 6416:1992. Measurement of liquid flow in open channels. Stream flow measurement. Measurement of discharge by the ultrasonic (acoustic) method
BS 2782-4:Method 452B:1993 BS 2782-4:Method 452B:1993. Methods of testing plastics. Chemical properties. Determination of carbon black content of polyolefin compound
BS EN 20105-C06:1993, ISO 105-C06:1987 BS EN 20105-C06:1993, ISO 105-C06:1987. Textiles. Tests for colour fastness. Colour fastness to domestic and commercial laundering
BS EN 20105-C05:1993, ISO 105-C05:1989 BS EN 20105-C05:1993, ISO 105-C05:1989. Textiles. Tests for colour fastness. Colour fastness to washing: Test 5
BS EN 20105-C04:1993, ISO 105-C04:1989 BS EN 20105-C04:1993, ISO 105-C04:1989. Textiles. Tests for colour fastness. Colour fastness to washing: Test 4
BS EN 20105-C03:1993, ISO 105-C03:1989 BS EN 20105-C03:1993, ISO 105-C03:1989. Textiles. Tests for colour fastness. Colour fastness to washing: Test 3
BS EN 20105-C02:1993, ISO 105-C02:1989 BS EN 20105-C02:1993, ISO 105-C02:1989. Textiles. Tests for colour fastness. Colour fastness to washing: Test 2
BS EN 20105-C01:1993, ISO 105-C01:1989 BS EN 20105-C01:1993, ISO 105-C01:1989. Textiles. Tests for colour fastness. Colour fastness to washing: Test 1
BS EN 20105-B02:1993, ISO 105-B02:1988 BS EN 20105-B02:1993, ISO 105-B02:1988. Textiles. Tests for colour fastness. Colour fastness artificial light (xenon arc fading lamp test)
BS EN 20105-A03:1993, ISO 105-A03:1987 BS EN 20105-A03:1993, ISO 105-A03:1987. Textiles. Tests for colour fastness. Grey scale for assessing staining
BS EN 20105-A02:1993, ISO 105-A02:1987 BS EN 20105-A02:1993, ISO 105-A02:1987. Textiles. Tests for colour fastness. Grey scale for assessing change in colour
BS EN 20105-A01:1993, ISO 105-A01:1989 BS EN 20105-A01:1993, ISO 105-A01:1989. Textiles. Tests for colour fastness. General principles of testing
BS 5358:1993 BS 5358:1993. Specification for solvent-borne priming paints for woodwork
BS 6319-11:1993 BS 6319-11:1993. Testing of resin and polymer/cement compositions for use in construction. Methods for determination of creep in compression and in tension
BS EN 564:1993 BS EN 564:1993. Mountaineering equipment. Accessory cord. Safety requirements and test method
BS EN 565:1993 BS EN 565:1993. Mountaineering equipment. Tape. Safety requirements and test method
BS EN 566:1993 BS EN 566:1993. Mountaineering equipment. Slings. Safety requirements and test method
BS EN 10079:1993 BS EN 10079:1993. Definition of steel products
BS EN 61104:1993, IEC 61104:1992 BS EN 61104:1993, IEC 61104:1992. Compact disc video system. 12 cm CD-V
DD ENV 41513:1993 DD ENV 41513:1993. Information systems interconnection. Virtual terminal. Basic class. VT Font assignment type 1
BS ISO/IEC 11072:1993 BS ISO/IEC 11072:1993. Information Technology. Computer graphics. Computer Graphics Reference Model
BS 6108-1:1993, ISO 6489-1:1991 BS 6108-1:1993, ISO 6489-1:1991. Couplings on agricultural towing vehicles. Specification for hook type
BS 5082:1993 BS 5082:1993. Specification for water-borne priming paints for woodwork
BS 1384-2:1993, ISO 5-2:1991 BS 1384-2:1993, ISO 5-2:1991. Photographic density measurements. Specification for geometric conditions for transmission density
BS 3680-3H:1993, ISO 9213:1992 BS 3680-3H:1993, ISO 9213:1992. Measurement of liquid flow in open channels. Stream flow measurement. Electromagnetic method using a full-channel-width coil
BS 7623:1993, IEC 61153:1992 BS 7623:1993, IEC 61153:1992. Electrical and pneumatic analogue chart recorders for use in industrial-process control systems. Guidance for inspection and routine testing
BS EN 567:1993 BS EN 567:1993. Mountaineering equipment. Rope clamp. Safety requirements and test method
BS EN 568:1993 BS EN 568:1993. Mountaineering equipment. Ice anchors. Safety requirements and test method
BS EN 569:1993 BS EN 569:1993. Mountaineering equipment. Pitons. Safety requirements and test method
BS ISO/IEC 10090:1992 BS ISO/IEC 10090:1992. Information technology. 90 mm optical disk cartridges, rewritable and read only, for data interchange
BS ISO/IEC 10165-2:1992 BS ISO/IEC 10165-2:1992. Information technology. Open systems interconnection. Structure of management information. Definition of management information
BS AU 50-1.1.3:1993, ISO 8767:1992 BS AU 50-1.1.3:1993, ISO 8767:1992. Tyres and wheels. Tyres. Car tyres. Method of measuring rolling resistance
BS AU 247:1993, ISO 9815:1992 BS AU 247:1993, ISO 9815:1992. Method of test for lateral stability of passenger car/trailer combinations
DD ENV 41213-3:1993 DD ENV 41213-3:1993. Information systems interconnection. Virtual terminal. Basic class. A-mode Telnet. Underlying layers check list
DD ENV 41213-1:1993 DD ENV 41213-1:1993. Information systems interconnection. Virtual terminal. Basic class. A-mode Telnet. Virtual terminal service
DD ENV 41211-1:1993 DD ENV 41211-1:1993. Information systems interconnection. Virtual terminal. Basic class. A-mode X.3. Virtual terminal service
BS EN 60933-3:1993, IEC 60933-3:1992 BS EN 60933-3:1993, IEC 60933-3:1992. Audio, video and audiovisual systems. Interconnections and matching values. Specification for interface for the interconnection of ENG cameras and portable VTRs using non-composite signals, for 625 line/50 field systems
BS 7620:1993, ISO 9982:1991 BS 7620:1993, ISO 9982:1991. Specification for industrial belt drives. Dimensions of pulleys and V-ribbed belts of PH, PJ, PK, PL and PM profiles
BS 6347-8:1993, ISO 789-8:1991 BS 6347-8:1993, ISO 789-8:1991. Performance assessment of agricultural tractors. Method of testing engine air cleaners
BS 6347-7:1993, ISO 789-7:1991 BS 6347-7:1993, ISO 789-7:1991. Performance assessment of agricultural tractors. Method for determination of axle power
BS 8010-3:1993 BS 8010-3:1993. Code of practice for pipelines. Pipelines subsea: design, construction and installation
BS 7621:1993, ISO 9847:1992 BS 7621:1993, ISO 9847:1992. Method for calibrating field pyranometers by comparison to a reference pyranometer
BS 7164-23.1:1993, ISO 6528-1:1992 BS 7164-23.1:1993, ISO 6528-1:1992. Chemical tests for raw and vulcanized rubber. Methods for determination of total sulfur content. Oxygen combustion flask method
BS 6450-3.1:1993 BS 6450-3.1:1993. Private branch exchanges for connection to public switched telephone networks run by certain public telecommunication operators. Direct dialling in on private branch exchanges. Specification for direct dialling in on private branch exchanges with terminating stations treated as an entirety
BS 6121-5:1993 BS 6121-5:1993. Mechanical cable glands. Code of practice for selection, installation and inspection of cable glands used in electrical installations
BS 6057-3.6:1993, ISO 506:1992 BS 6057-3.6:1993, ISO 506:1992. Rubber latices. Methods of test. Determination of volatile fatty acid number of natural rubber latices
BS 5551-4.4.2:1993, ISO 8190:1992 BS 5551-4.4.2:1993, ISO 8190:1992. Fertilizers. Chemical analysis. Determination of water. Gravimetric method by drying at 105°C
BS 5551-4.4.1:1993, ISO 8189:1992 BS 5551-4.4.1:1993, ISO 8189:1992. Fertilizers. Chemical analysis. Determination of water. Gravimetric method by drying under reduced pressure
BS 4742-2:1993, ISO 5675:1992 BS 4742-2:1993, ISO 5675:1992. Hydraulic equipment for agricultural machinery. Specification for quick-action hydraulic couplers for general purposes
BS 3680-3Q:1993 BS 3680-3Q:1993. Measurement of liquid flow in open channels. Stream flow measurement. Code of practice for safe practice in stream gauging
BS 3406-4:1993 BS 3406-4:1993. Methods for determination of particle size distribution. Guide to microscope and image analysis methods
BS 684:Part 2:Section 2.3:1993, ISO 663:1992 BS 684:Part 2:Section 2.3:1993, ISO 663:1992. Methods of analysis of fats and fatty oils. Other methods. Determination of insoluble impurities content
BS EN 60601-2-22:1993, BS 5724:Section 2.122:1993,IEC 60601-2-22:1992 BS EN 60601-2-22:1993, BS 5724:Section 2.122:1993,IEC 60601-2-22:1992. Medical electrical equipment. Particular requirements for safety. Specification for diagnostic and therapeutic laser equipment
BS EN 61011-2:1993 BS EN 61011-2:1993. Electric fence energizers. Safety requirements for battery-operated electric fence energizers not for connection to the supply mains
BS EN 61011-1:1993 BS EN 61011-1:1993. Electric fence energizers. Safety requirements for battery-operated electric fence energizers suitable for connection to the supply mains
BS EN 28662-1:1993, ISO 8662-1:1988 BS EN 28662-1:1993, ISO 8662-1:1988. Hand-held portable power tools. Measurement of vibrations at the handle. General
BS EN 24624:1993, ISO 4624:1978 BS EN 24624:1993, ISO 4624:1978. Paints and varnishes. Pull-off test
DD ENV 41213-2:1993 DD ENV 41213-2:1993. Information systems interconnection. Virtual terminal. Basic class. A-mode Telnet. Virtual Terminal Protocol check list
DD ENV 41211-3:1993 DD ENV 41211-3:1993. Information systems interconnection. Virtual terminal. Basic class. A-mode X.3. Underlying layers check list
DD ENV 41211-2:1993 DD ENV 41211-2:1993. Information systems interconnection. Virtual terminal. Basic class. A-mode X.3. Virtual terminal protocol check list
PD 6562:1992 PD 6562:1992. A draft amendment to BS 6789-3.1:1985 'Apparatus with one or more particular functions for connection to the British Telecommunications public switched network. Part 3. Apparatus with auto-calling, auto-answering and auto-clearing facilities. Section 3.1. Specification for auto-calling facilities'
BS 4783-6:1993 BS 4783-6:1993. Storage, transportation and maintenance of media for use in data processing and information storage. Recommendations for optical disk cartridges (ODC)
BS 4783-7:1993 BS 4783-7:1993. Storage, transportation and maintenance of media for use in data processing and information storage. Recommendations for optical data disks (CD-ROM)
BS EN 60335-2-48:1992 BS EN 60335-2-48:1992. Specification for safety of household and similar electrical appliances. Particular requirements. Commercial electric grillers and toasters
BS EN 60335-2-27:1992 BS EN 60335-2-27:1992. Specification for safety of household and similar electrical appliances. Particular requirements. Ultra-violet and infra-red radiation skin treatment appliances for household and similar use
BS 6538-2:1992, ISO 5636-3:1992 BS 6538-2:1992, ISO 5636-3:1992. Air permeance of paper and board. Method for determination of air permeance using the Bendtsen apparatus
BS 6320:1992 BS 6320:1992. Specification for modems for connection to public switched telephone networks and speech band private circuits run by certain public telecommunications operators
BS 7618:Part 1:1992, ISO 9703-1:1992 BS 7618:Part 1:1992, ISO 9703-1:1992. Alarm signals for anaesthesia and respiratory care. Specification for visual alarm signals
BS 6548-3:1992, IEC 60706-3:1987 BS 6548-3:1992, IEC 60706-3:1987. Maintainability of equipment. Guide to maintainability, verification and the collection, analysis and presentation of maintainability data
BS 4415-1:1992, ISO 1924-1:1992 BS 4415-1:1992, ISO 1924-1:1992. Determination of the tensile properties of paper and board. Constant rate of loading method
BS 4325-9:1992, ISO 5502:1992 BS 4325-9:1992, ISO 5502:1992. Methods for analysis of oilseed residues. Preparation of test samples
BS 4231:1992, ISO 3448:1992 BS 4231:1992, ISO 3448:1992. Classification for viscosity grades of industrial liquid lubricants
BS EN 61110:1992, IEC 61110:1992 BS EN 61110:1992, IEC 61110:1992. System Omega and differential Omega receivers for ships. Operational and performance requirements. Methods of testing and required test results
BS EN 60335-2-10:1992 BS EN 60335-2-10:1992. Specification for safety of household and similar electrical appliances. Particular requirements. Floor treatment machines and wet scrubbing machines
PD 6572:1992 PD 6572:1992. Text for BS 6833:Part 6:1992 "Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks. Part 6. Specification for cordless portable parts and cordless fixed parts as separate stand alone items of apparatus"
PD 6571:1992 PD 6571:1992. Text for BS 6789-2:1992 "Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunication operators. Part 2. Specification for apparatus with loudspeaking facilities"
BS QC 301901:1992 BS QC 301901:1992. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed multilayer ceramic chip capacitors. Assessment level E
BS EN 60870-5-3:1992 BS EN 60870-5-3:1992. Telecontrol equipment and systems. Transmission protocols. Specification for general structure of application data
BS 7442-4.1:1992 BS 7442-4.1:1992. Rubber or plastics covered rollers. Requirements. Specification for apparent hardness
BS 751:1992 BS 751:1992. Specification for steel baseplates for flat bottom railway rails
BS 499-1:Supplement:1992 BS 499-1:Supplement:1992. Welding terms and symbols. Supplement. Definitions for electric welding equipment
PD 6570-6:1992 PD 6570-6:1992. Draft standard to match to and work with ETS 300 001/NET4 "Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks run by certain public telecommunications operators". Specification for cordless portable parts and cordless fixed parts as separate stand alone items
PD 6569-6.2:1992 PD 6569-6.2:1992. Draft standard to match to and work with ETS 300 001/NET4 "Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators". Specification for series connected apparatus. Apparatus having less than maximum allowable impairments
PD 6569-6.1:1992 PD 6569-6.1:1992. Draft standard to match to and work with ETS 300 001/NET4 "Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators". Specification for series connected apparatus. Apparatus having maximum allowable impairments
PD 6569-3.2:1992 PD 6569-3.2:1992. Draft standard to match to and work with ETS 300 001/NET4. Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Apparatus with auto-calling, auto-answering and auto-clearing facilities. Specification for auto-answering and auto-clearing facilities
PD 6569-3.1:1992 PD 6569-3.1:1992. Draft standard to match to and work with ETS 300 001/NET4. Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Apparatus with auto-calling, auto-answering and auto-clearing facilities. Specification for auto-calling facilities
PD 6569-2:1992 PD 6569-2:1992. Draft standard to match to and work with ETS 300 001/NET4 "Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators". Specification for apparatus with loudspeaking facilities
BS EN 19:1992 BS EN 19:1992. Marking of general purpose industrial valves
BS 6840-3:1992, IEC 60268-3:1988 BS 6840-3:1992, IEC 60268-3:1988. Sound system equipment. Methods for specifying and measuring the characteristics of sound system amplifiers
BS 6783-13:1992, ISO 11400:1992 BS 6783-13:1992, ISO 11400:1992. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for the determination of phosphorus in nickel, ferronickel and nickel alloys by phosphovanadomolybdate molecular absorption spectrometry
BS 5223:Part 2:1992 BS 5223:Part 2:1992. Specification for hospital bedding. Combustion modified, flexible polyurethane, general purpose foam mattress cores
BS 5057:1992, IEC 60760:1989 BS 5057:1992, IEC 60760:1989. Specification for flat, quick-connect terminations
BS 4656-30:1992 BS 4656-30:1992. Accuracy of machine tools and methods of test. Specification for machining centres and computer numerically controlled milling machines, horizontal and vertical spindle types
BS 3748:1992, ISO 2493:1992 BS 3748:1992, ISO 2493:1992. Method for determination of resistance to bending of paper and board
BS QC 960300:1992, IEC 61020-6:1991 BS QC 960300:1992, IEC 61020-6:1991. Harmonized system of quality assessment for electronic components. Electromechanical switches for use in electronic equipment. Sectional specification for sensitive switches
BS 6651:1992 BS 6651:1992. Code of practice for protection of structures against lightning
BS EN 2591-D1:1992 BS EN 2591-D1:1992. Elements of electrical and optical connection. Test methods. Acceleration, steady state
BS CECC 40104:1992 BS CECC 40104:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed low power non-wirewound resistors of enhanced quality
BS EN 2591-C1:1992 BS EN 2591-C1:1992. Elements of electrical and optical connection. Test methods. Endurance at temperature
BS EN 2591:1992 BS EN 2591:1992. Elements of electrical and optical connection. Test methods. General
BS EN 2591-B1:1992 BS EN 2591-B1:1992. Elements of electrical and optical connection. Test methods. Contact resistance. Low level
PD 6570-1:1992 PD 6570-1:1992. Draft standard to match to and work with ETS 300 001/NET4 "Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks run by certain public telecommunications operators". Specification for general requirements
PD 6569-7:1992 PD 6569-7:1992. Draft standard to match to and work with ETS 300 001/NET4 "Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators". Specification for apparatus with call barring facilities
PD 6569-1:1992 PD 6569-1:1992. Draft standard to match to and work with ETS 300 001/NET4 "Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators". Specification for general requirements
PD 6568:1992 PD 6568:1992. Draft standard to match to and work with ETS 300 001/NET4. Specification for simple telephones for connection to public switched telephone networks run by certain public telecommunications operators
PD 6567:1992 PD 6567:1992. A draft amendment to BS 6833-1:1987 "Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks. Part 1. Specification for general requirements"
PD 6566:1992 PD 6566:1992. A draft amendment to BS 6789-7:1988 "Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Part 7. Specification for apparatus with call barring facilities"
PD 6565:1992 PD 6565:1992. A draft amendment to BS 6789-6.2:1989 "Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Part 6. Specification for series connected apparatus. Section 6.2. Apparatus having less than maximum allowable impairments"
PD 6564:1992 PD 6564:1992. A draft amendment to BS 6789-6.1:1986 "Apparatus with one or more particular functions for connection to certain public switched telephone networks. Part 6. Specification for series connected apparatus. Section 6.1. Apparatus having maximum allowable impairments"
PD 6563:1992 PD 6563:1992. A draft amendment to BS 6789-3.2:1987 "Apparatus with one or more particular functions for connection to certain public switched telephone networks. Part 3. Apparatus with auto-calling, auto-answering and auto-clearing facilities. Section 3.2. Specification for auto-answering and auto-clearing facilities"
DD 210:1992 DD 210:1992. Guide to a framework for user requirements for Information Technology
PD 6561:1992 PD 6561:1992. A draft amendment to BS 6789-1:1984 "Apparatus with one or more particular functions for connection to the British Telecommunications public switched telephone network. Part 1. Specification for general requirements"
PD 6560:1992 PD 6560:1992. A draft amendment to BS 6305:1992 "Specification for general requirements for apparatus for connection to public switched telephone networks run by certain public telecommunications operators"
BS 7593:1992 BS 7593:1992. Code of practice for treatment of water in domestic hot water central heating systems
BS 949-2:1992 BS 949-2:1992. Screwing taps. Specification for unified ground thread taps. Manufacturing tolerances
BS 6912-9:1992, ISO 10567:1992 BS 6912-9:1992, ISO 10567:1992. Safety of earth-moving machinery. Methods for the calculation and verification of the lift capacity of hydraulic excavators
BS 6100-0:1992 BS 6100-0:1992. Glossary of building and civil engineering terms. Introduction
BS 2782-1:Method 140A:1992, ISO 1210:1992 BS 2782-1:Method 140A:1992, ISO 1210:1992. Methods of testing plastics. Thermal properties. Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
BS 5234-2:1992 BS 5234-2:1992. Partitions (including matching linings). Specification for performance requirements for strength and robustness including methods of test
BS 5117-0:1992 BS 5117-0:1992. Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). General introduction
BS EN 171:1992 BS EN 171:1992. Specification for infra-red filters used in personal eye-protection equipment
BS EN 25814:1992, ISO 5814:1990 BS EN 25814:1992, ISO 5814:1990. Method for determination of dissolved oxygen in water: electrochemical probe method
BS EN 60335-2-49:1992 BS EN 60335-2-49:1992. Specification for safety of household and similar electrical appliances. Particular requirements. Commercial catering electric hot cupboards
BS AU 50-1.4.5:1992, ISO 7867-1:1992 BS AU 50-1.4.5:1992, ISO 7867-1:1992. Tyres and wheels. Tyres. Agricultural tractor and machine tyres. Specification for designations, dimensions and marking for metric series tyres
BS EN 169:1992 BS EN 169:1992. Specification for filters for personal eye-protection equipment used in welding and similar operations
BS EN 136-10:1992 BS EN 136-10:1992. Parts for full face masks for respiratory protective devices. Specification for full face masks for special use
BS 7455-8:1992, ISO 7530-8:1992 BS 7455-8:1992, ISO 7530-8:1992. Analysis of nickel alloys by flame atomic absorption spectrometry. Method for determination of silicon
BS 7455-7:1992, ISO 7530-7:1992 BS 7455-7:1992, ISO 7530-7:1992. Analysis of nickel alloys by flame atomic absorption spectrometry. Method for determination of aluminium
BS 6783-12:1992, ISO 9388:1992 BS 6783-12:1992, ISO 9388:1992. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for the determination of phosphorus in nickel alloys by molybdenum blue molecular absorption spectrometry
BS 5293-20:1992, ISO 3257:1992 BS 5293-20:1992, ISO 3257:1992. Sampling and testing carbon black for use in the rubber industry. Method for evaluation in styrene-butadiene rubbers
BS 5293-6:1992, ISO 1437:1992 BS 5293-6:1992, ISO 1437:1992. Sampling and testing carbon black for use in the rubber industry. Method for determination of sieve residue
BS 5293-5:1992, ISO 1126:1992 BS 5293-5:1992, ISO 1126:1992. Sampling and testing carbon black for use in the rubber industry. Method for determination of loss of mass on heating
BS 5202:Part 4:1992, ISO 2881:1992 BS 5202:Part 4:1992, ISO 2881:1992. Methods for chemical analysis of tobacco and tobacco products. Determination of alkaloid content (spectrometric method)
BS 5086-6:1992, ISO 1740:1991 BS 5086-6:1992, ISO 1740:1991. Analysis of butter. Method for determination of fat acidity and free fatty acids in the fat of butter and milk fat products (reference method)
BS EN ISO 2409:1995, BS 3900-E6:1992 BS EN ISO 2409:1995, BS 3900-E6:1992. Paints and varnishes. Cross-cut test
BS 6317:1992 BS 6317:1992. Specification for simple telephones for connection to public switched telephone networks run by certain public telecommunications operators
BS EN 367:1992 BS EN 367:1992. Protective clothing. Protection against heat and fire. Method for determining heat transmission on exposure to flame
BS N 5:1992 BS N 5:1992. Specification for crew portable protective breathing equipment for use during aircraft emergencies
BS ISO/IEC 10165-4:1992 BS ISO/IEC 10165-4:1992. Information technology. Open systems interconnection. Structure of management information. Guidelines for the definition of managed objects
BS 7581:1992 BS 7581:1992. Guide to presentation of tables and graphs
BS 5944-6:1992, ISO 4412-3:1991 BS 5944-6:1992, ISO 4412-3:1991. Measurement of airborne noise from hydraulic fluid power systems and components. Method of test for pumps using a parallelepiped microphone array
BS 5944-2:1992, ISO 4412-2:1991 BS 5944-2:1992, ISO 4412-2:1991. Measurement of airborne noise from hydraulic fluid power systems and components. Method of test for motors
BS 5944-1:1992, ISO 4412-1:1991 BS 5944-1:1992, ISO 4412-1:1991. Measurement of airborne noise from hydraulic fluid power systems and components. Method of test for pumps
BS 4A 112:1992 BS 4A 112:1992. Specification for cadmium-plated steel shear bolts (Unified hexagons and Unified threads)
BS EN 61107:1992, IEC 61107:1992 BS EN 61107:1992, IEC 61107:1992. Data exchange for meter reading, tariff and load control. Direct local data exchange
BS EN 50014:1993 BS EN 50014:1993. Electrical apparatus for potentially explosive atmospheres. General requirements
BS EN 2243-5:1992 BS EN 2243-5:1992. Test methods for structural adhesives. Ageing tests
BS EN 303-1:1992 BS EN 303-1:1992. Heating boilers. Heating boilers with forced draught burners. Terminology, general requirements, testing and marking
BS 7562-4:1992 BS 7562-4:1992. Planning, design and installation of irrigation schemes. Guide to water resources
BS 1679-8:1992 BS 1679-8:1992. Containers for pharmaceutical dispensing. Specification for glass and plastics containers for solid dosage forms, semi-solids and powders
BS 3951:Part 2:Section 2.6:1992, ISO 9669:1990 BS 3951:Part 2:Section 2.6:1992, ISO 9669:1990. Freight containers. Specification and testing of series 1 freight containers. Interface connections for tank containers
BS 6811:Part 2:Section 2.3:1992, IEC 60851-3:1985 BS 6811:Part 2:Section 2.3:1992, IEC 60851-3:1985. Winding wires. Methods of test. Mechanical properties
BS QC 960201:1992, IEC 61020-4-1:1991 BS QC 960201:1992, IEC 61020-4-1:1991. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical switches for use in electronic equipment. Blank detail specification for lever (toggle) switches
BS QC 960301:1992 BS QC 960301:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical switches for use in electronic equipment. Blank detail specification for sensitive switches
BS QC 960401:1992 BS QC 960401:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical switches for use in electronic equipment. Blank detail specification for pushbutton switches
BS 3843-1:1992 BS 3843-1:1992. Guide to terotechnology (the economic management of assets). Introduction to terotechnology
BS 5234-1:1992 BS 5234-1:1992. Partitions (including matching linings). Code of practice for design and installation
BS 6221-12:1992, IEC 60326-12:1992 BS 6221-12:1992, IEC 60326-12:1992. Printed wiring boards. Specification for mass lamination panels (semi-manufactured multilayer printed boards)
BS EN 61099:1992, IEC 61099:1992 BS EN 61099:1992, IEC 61099:1992. Specification for unused synthetic organic esters for electrical purposes
DD ENV 41801-1:1992 DD ENV 41801-1:1992. Information systems interconnection. Relaying the connectionless-mode network service. General overview and subnetwork independent requirements
DD ENV 41801-2:1992 DD ENV 41801-2:1992. Information systems interconnection. Relaying the connectionless-mode network service. LAN subnetwork dependent media independent requirements
DD ENV 41801-3:1992 DD ENV 41801-3:1992. Information systems interconnection. Relaying the connectionless-mode network service. ISO 8802-3 CSMA/CD subnetwork dependent media dependent requirements
DD ENV 41801-5:1992 DD ENV 41801-5:1992. Information systems interconnection. Relaying the connectionless-mode network service. Profile RA51.51 (M-IT-02 R/21)
DD ENV 41801-7:1992 DD ENV 41801-7:1992. Information systems interconnection. Relaying the connectionless-mode network service. PSDN subnetwork dependent media dependent requirements for virtual calls over a permanent access
DD ENV 41801-8:1992 DD ENV 41801-8:1992. Information systems interconnection. Relaying the connectionless-mode network service. Profile RA51.1111 (M-IT-02 R/22 over PSDN leased line)
DD ENV 41801-9:1992 DD ENV 41801-9:1992. Information systems interconnection. Relaying the connectionless-mode network service. Profile RA51.1121 (M-IT-02 R/22 over digital datacircuit/CSDN leased line)
BS 1894:1992 BS 1894:1992. Specification for design and manufacture of electric boilers of welded construction
BS QC 960200:1992, IEC 61020-4:1991 BS QC 960200:1992, IEC 61020-4:1991. Harmonized system of quality assessment for electronic components. Electromechanical switches for use in electronic equipment. Sectional specification for lever (toggle) switches
BS QC 960400:1992, IEC 61020-5:1991 BS QC 960400:1992, IEC 61020-5:1991. Harmonized system of quality assessment for electronic components. Electromechanical switches for use in electronic equipment. Sectional specification for pushbutton switches
DD ENV 41802-6:1992 DD ENV 41802-6:1992. Information systems interconnection. X.25 protocol relaying. Profile RC51.1121 (M-IT-02 R/32 over digital data circuit/CSDN leased line)
DD ENV 41802-5:1992 DD ENV 41802-5:1992. Information systems interconnection. X.25 protocol relaying. Profile RC51.1111 (M-IT-02 R/32 over PSTN leased line)
DD ENV 41802-4:1992 DD ENV 41802-4:1992. Information systems interconnection. X.25 protocol relaying. PSDN subnetwork dependent media dependent requirements for virtual calls over a permanent access
DD ENV 41802-3:1992 DD ENV 41802-3:1992. Information systems interconnection. X.25 protocol relaying. ISO 8802-3 CSMA/CD subnetwork dependent media dependent requirements
DD ENV 41802-2:1992 DD ENV 41802-2:1992. Information systems interconnection. X.25 protocol relaying. LAN subnetwork dependent media independent requirements
DD ENV 41802-1:1992 DD ENV 41802-1:1992. Information systems interconnection. X.25 protocol relaying. General overview and subnetwork independent requirements
BS 771:1992, ISO 800:1992 BS 771:1992, ISO 800:1992. Specification for phenolic moulding materials
BS 1722:Part 8:1992 BS 1722:Part 8:1992. Fences. Specification for mild steel (low carbon steel) continuous bar fences
BS 1722-9:1992 BS 1722-9:1992. Fences. Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals
BS 2782-1:Methods 134A and 134B:1992 BS 2782-1:Methods 134A and 134B:1992. Methods of testing plastics. Thermal properties. Determination of the oxidation induction time of thermoplastics
BS 7591-1:1992 BS 7591-1:1992. Porosity and pore size distribution of materials. Method of evaluation by mercury porosimetry
BS 7611:1992 BS 7611:1992. Specification for potato storage boxes for mechanical handling
BS 7614:1992, ISO 9961:1992 BS 7614:1992, ISO 9961:1992. Specification for natural tracing paper
BS 7615:1992, ISO 10190:1992 BS 7615:1992, ISO 10190:1992. Specification for motor cycle chains
BS EN 303-2:1992 BS EN 303-2:1992. Heating boilers. Heating boilers with forced draught burners. Special requirements for boilers with atomizing oil burners
BS EN 27490:1992, ISO 7490:1990 BS EN 27490:1992, ISO 7490:1990. Specification for dental gypsum-bonded casting investments for gold alloys
BS EN 141101:1992 BS EN 141101:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Lead-screw actuated and rotary preset potentiometers
BS CECC 75201:1992 BS CECC 75201:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Interim example. Detail specification/blank detail specification. Circular connectors for frequencies below 3 MHz
BS EN 29092:1992, ISO 9092:1988 BS EN 29092:1992, ISO 9092:1988. Textiles. Nonwovens. Definition
BS EN 417:1992 BS EN 417:1992. Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances. Construction, inspection, testing and marking
BS 6912-8:1992, ISO 10570:1992 BS 6912-8:1992, ISO 10570:1992. Safety of earth-moving machinery. Specification for performance requirements of an articulated frame locking device
BS 3843-3:1992 BS 3843-3:1992. Guide to terotechnology (the economic management of assets). Guide to the available techniques
DD ENV 41007-1:1992 DD ENV 41007-1:1992. Definition of terms in private telecommunication networks. Definition of general terms
BS ISO/IEC 1863:1990 BS ISO/IEC 1863:1990. Information processing. 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using NRZ1 at 32 ftpmm (800 ftpi). 32 cpmm (800 cpi)
DD ENV 41004:1992 DD ENV 41004:1992. Reference configuration for connectivity relations of private telecommunication network exchanges
BS EN 60335-2-33:1992 BS EN 60335-2-33:1992. Specification for safety of household and similar electrical appliances. Particular requirements. Coffee mills and coffee grinders
BS EN 49-2:1992 BS EN 49-2:1992. Wood preservatives. Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival. Application by impregnation (laboratory method)
BS 7591-2:1992 BS 7591-2:1992. Porosity and pore size distribution of materials. Method of evaluation by gas adsorption
BS 5892-4:1992 BS 5892-4:1992. Railway rolling stock materials. Specification for forged and rolled tyres
BS 2782-8:Method 826A:1992 BS 2782-8:Method 826A:1992. Methods of testing plastics. Other properties. Determination of adhesion of print on plastics sheet
BS EN 49-1:1992 BS EN 49-1:1992. Wood preservatives. Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival. Application by surface treatment (laboratory method)
BS EN 275:1992 BS EN 275:1992. Wood preservatives. Determination of the protective effectiveness against marine borers
BS EN 60335-2-50:1992 BS EN 60335-2-50:1992. Specification for safety of household and similar electrical appliances. Particular requirements. Commercial electric bains-marie

BIS Standards Catalogue